Details, datasheet, quote on part number: LNJ210C6ARA
PartLNJ210C6ARA
CategoryOptoelectronics => Display => LEDs => LED Lamps => Chip LEDs
TitleChip LEDs
DescriptionBrightness = ;; Type 1 = Side View ;; Type 2 = ;; Outline (mm) = 1.2×2.3 ;; Lighting Color = Red ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LNJ210C6ARA datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Conventional Part No. Global Prat No. Lighting Color

LNJ810L6DRA s Absolute Maximum Ratings (Ta = 25C) Lighting Color PD(mW) IF(mA) IFP Red 20 60 Red 20 60 Green 20 60 Amber 20 60 Orange 20 60 (mA)

Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec
Lens Color Clear Yellow Clear Red Clear -




Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Related products with the same datasheet
LNJ210C6RRA
LNJ310M6URA
LNJ410Q6YRA
LNJ810L6DRA
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LNJ210C6RRA Brightness = ;; Type 1 = Side View ;; Type 2 = ;; Outline (mm) = 1.2×2.3 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ211R8ARA Brightness = High Brightness ;; Type 1 = 3216 ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ211R8ARU Brightness = ;; Type 1 = Through The Board ;; Type 2 = ;; Outline (mm) = 3216 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ212R8ARA Brightness = ;; Type 1 = TSS ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ216C8ARA Brightness = High Brightness ;; Type 1 = Micro Lens ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ218C8ARU1 Brightness = High Brightness ;; Type 1 = Dome Lens ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ218C8TRU Ultra Hight Bright Surface Mounting Chip Led
LNJ251C4ARA Brightness = High Brightness ;; Type 1 = J ;; Type 2 = Gaalas ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ251C4RRA Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ261C3ARA Brightness = High Brightness ;; Type 1 = GW ;; Type 2 = Gaalas ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ261C3RRA Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ306G5TR02 Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ306G5URA Brightness = High Brightness ;; Type 1 = S-j ;; Type 2 = Gaalas ;; Outline (mm) = 2125 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ306G5URW Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ308G8JRA Surface Mounting Chip Led
LNJ308G8LRA Brightness = High Brightness ;; Type 1 = SS ;; Type 2 = Gaalas ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ310M6URA Brightness = ;; Type 1 = Side View ;; Type 2 = ;; Outline (mm) = 1.2×2.3 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ311G8TRA Brightness = High Brightness ;; Type 1 = 3216 ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ311G8TRU Brightness = ;; Type 1 = Through The Board ;; Type 2 = ;; Outline (mm) = 3216 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ312G8LRA Brightness = ;; Type 1 = TSS ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ314G8TRA Brightness = ;; Type 1 = Uss ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = Green ;; Remarks = ;; Package =

ERG-2SJ180 : 18 Ohm 2W Through Hole Resistors; RES 18 OHM 2W 5% METAL OXIDE Specifications: Resistance (Ohms): 18 ; Power (Watts): 2W ; Tolerance: 5% ; Packaging: Bulk ; Composition: Metal Oxide Film ; Temperature Coefficient: 350ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-2RKF19R1X : 19.1 Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 19.1 OHM 1/10W 1% 0402 SMD Specifications: Resistance (Ohms): 19.1 ; Power (Watts): 0.1W, 1/10W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-S12F5100U : 510 Ohm 0.75W, 3/4W Chip Resistor - Surface Mount; RES ANTI-SULFUR 510 OHM 1% 1812 Specifications: Resistance (Ohms): 510 ; Power (Watts): 0.75W, 3/4W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-12SF2610U : 261 Ohm 0.75W, 3/4W Chip Resistor - Surface Mount; RES 261 OHM 3/4W 1% 2010 SMD Specifications: Resistance (Ohms): 261 ; Power (Watts): 0.75W, 3/4W ; Tolerance: 1% ; Packaging: Digi-Reel ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-6ENF28R7V : 28.7 Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 28.7 OHM 1/8W 1% 0805 SMD Specifications: Resistance (Ohms): 28.7 ; Power (Watts): 0.125W, 1/8W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-1TNF2870U : 287 Ohm 1W Chip Resistor - Surface Mount; RES 287 OHM 1W 1% 2512 SMD Specifications: Resistance (Ohms): 287 ; Power (Watts): 1W ; Tolerance: 1% ; Packaging: Digi-Reel ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERA-6AEB472V : 4.7K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 4.7K OHM 1/8W .1% 0805 SMD Specifications: Resistance (Ohms): 4.7K ; Power (Watts): 0.125W, 1/8W ; Tolerance: 0.1% ; Packaging: Cut Tape (CT) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-2RKF4122X : 41.2K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 41.2K OHM 1/10W 1% 0402 SMD Specifications: Resistance (Ohms): 41.2K ; Power (Watts): 0.1W, 1/10W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

EVQ-11A09K : SPST-NO Tactile Switch Off-Mom 0.02A @ 15VDC; SWITCH LIGHT TOUCH 9.5MM 100GF Specifications: Actuator Type: Standard ; Circuit: SPST-NO ; Contact Rating @ Voltage: 0.02A @ 15VDC ; Mounting Type: Through Hole ; Operating Force: 100gf ; Orientation: Vertical ; Outline: 6.00mm x 6.00mm ; Switch Function: Off-Mom ; Illumination: Non-Illuminated ; Lead Free Status: Lead Free ; Ro

UP0411100L : Transistor (bjt) - Arrays, Pre-biased Discrete Semiconductor Product 100mA 50V 125mW 2 PNP - Pre-Biased (Dual); TRANS ARRAY PNP/PNP SS MINI-6P Specifications: Transistor Type: 2 PNP - Pre-Biased (Dual) ; Voltage - Collector Emitter Breakdown (Max): 50V ; Current - Collector (Ic) (Max): 100mA ; Power - Max: 125mW ; Resistor - Base (R1) (Ohms): 10K ; Resistor - Emitter Base (R2) (Ohms): 10K ; Vce Saturation (Max) @ Ib, Ic: 250mV @ 300A, 10m

DRA5123E0L : Transistor (bjt) - Single, Pre-biased Discrete Semiconductor Product 100mA 50V 150mW PNP - Pre-Biased; TRANS PNP W/RES 50V 100MA SMINI3 Specifications: Transistor Type: PNP - Pre-Biased ; Voltage - Collector Emitter Breakdown (Max): 50V ; Current - Collector (Ic) (Max): 100mA ; Power - Max: 150mW ; Resistor - Base (R1) (Ohms): 2.2K ; Resistor - Emitter Base (R2) (Ohms): 2.2K ; Vce Saturation (Max) @ Ib, Ic: 300mV @ 500A, 10mA ; Cur

Same catergory

F-51161NCU-FW-AA : CSTN. Size:3.7 Display Format:240*RGB*160 Contrast Ratio:40:1 Luminance:120 Backlight:cct Product Category:cstn Type:transmissive LCD Mode:color Viewing Direction: 12:00 Interface: N/a View Angle (h V):+-50 -30/40 Temperature: Normal.

LC95 : Amplifiers. 980nm Pump Laser Module - Grating Stabilized, 300-400mW. These lasers are designed as pump sources for erbium doped fibre amplifier (EDFA) applications. Processes and techniques of coupling the fibre to the laser allow high output powers that are very stable with both time and temperature. The grating is located in the pigtail to stabilise the wavelength. Devices are available with kink free output powers.

LD-101 : Flat Displays. The LD-101 series were designed in response to the need for small, flat displays. These are single-chip, flat displays with high luminance. !External dimensions (Units : mm) ! 1) Planar emission from a single chip. 2) Thin outer casing, multiple units can be coupled together. Parameter Power dissipation Forward current Peak forward current Reverse voltage.

SSI-LXMP059ID-150 : 2x5 Panel Indicator Assembly With Wire Leads.

STV6411AD : Audio/video Switch Matrix. VIDEO SECTION 4 CVBS INPUTS, 3 CVBS OUTPUTS (ONE WITH SELECTABLE CHROMA TRAP FILTER) 4 Y/C INPUTS, 2 Y/C OUTPUTS 6dB GAIN ON ALL CVBS/Y AND C OUTPUTS 1 Y/C ADDER 2 RGB/FB INPUTS, 1 RGB/FB OUTPUT WITH 6dB ADJUSTABLE GAIN VIDEO MUTING ON ALL THE OUTPUTS 2 SLOW BLANKING INPUTS/OUTPUTS SYNC BOTTOM CLAMP ON ALL CVBS/Y AND RGB INPUTS, AVERAGE ON C INPUTS.

W53SYC : Material: Ingaalp , Wavelength: 588nm. The Super Bright Yellow source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. LIFE - SOLID STATE RELIABILITY. ON TAPE AND REEL. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. s are subject to change.

XLMR81WE : Material (Color) = GaAlAs(Red);; Lens = Water Clear;; Peak Wave Length = 660;; Iv(ucd) If@10mA Min.= 2000;; Iv(ucd) If@10mA Typ.= 2790.

ZHX1810 : IrDA. Dimensions  = 8.9 X 3.5 X 2.75 ;; Data Rate  = 2.4 -115.2 K ;; Listen Current  = 90 µA ;; Receive Current  = 90 µA ;; Link Distance  = 1 Meter ;; Voltage Range  = 2.4 - 5.5 ;; Temp Range  = -30 to +85 ;; Pin Count  = 6 ;;.

NHD-0220GZ-FL-YBW : LCD Character Display Modules 2 x 20 STN-Y/G 80.0 x 36.0. s: Manufacturer: Newhaven Display ; Product Category: LCD Character Display Modules ; RoHS:  Details ; Display Mode: Transflective ; Character Count x Line: 20 x 2 ; Module Size (W x H x T): 80 mm x 36 mm x 13.5 mm ; Fluid Type: STN ; Interface: Parallel ; Background Color: Yellow / Green.

SLA560BD2T3F : Standard LED - Through Hole HI-BRIGHT BLUE-TRANS 40 VIEW ANGLE 468NM. » » » LEDs - High Brightness - Leaded - Blue LEDs - High Brightness - Leaded - BlueStandard Leaded LED components are often used in indication applications and generally have power levels s: Manufacturer: ROHM Semiconductor ; Product Category: Standard LED - Through.

OVLGY0C9B9 : LEDs -; LED 589NM TAPERED YELLOW 5MM. s: Color: Yellow ; Lens Style/Size: Round with Domed Top, 5mm, T-1 3/4 ; Millicandela Rating: 10300mcd ; Voltage - Forward (Vf) Typ: 2V ; Wavelength - Dominant: 589nm ; Wavelength - Peak: - ; Current - Test: 20mA ; Viewing Angle: 6 ; Lens Type: Clear ; Luminous Flux @ Current - Test: - ; Package / Case: Radial.

CCL-LX45GT : LEDs -; LED CHIP GREEN TRANSP CERM SMD. s: Color: Green ; Lens Style/Size: Oval with Domed Top, 2mm x 1mm ; Millicandela Rating: 7mcd ; Voltage - Forward (Vf) Typ: 2.2V ; Wavelength - Dominant: - ; Wavelength - Peak: 565nm ; Current - Test: 20mA ; Viewing Angle: 180 ; Lens Type: Clear, Tinted ; Luminous Flux @ Current - Test: - ; Package / Case: 0805.

LEDH-101C-34 : Accessories; 90D LED HOLDERS FOR T1 LED .13". s: Accessory Type: LED - Holder, Mounting Clip ; For Use With/Related Products: 3mm, T-1 LED ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

 
0-C     D-L     M-R     S-Z