Details, datasheet, quote on part number: LNJ310M6URA
PartLNJ310M6URA
CategoryOptoelectronics => Display => LEDs => LED Lamps => Chip LEDs
TitleChip LEDs
DescriptionBrightness = ;; Type 1 = Side View ;; Type 2 = ;; Outline (mm) = 1.2×2.3 ;; Lighting Color = Red ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LNJ310M6URA datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Conventional Part No. Global Prat No. Lighting Color

LNJ810L6DRA s Absolute Maximum Ratings (Ta = 25C) Lighting Color PD(mW) IF(mA) IFP Red 20 60 Red 20 60 Green 20 60 Amber 20 60 Orange 20 60 (mA)

Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec
Lens Color Clear Yellow Clear Red Clear -




Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Related products with the same datasheet
LNJ210C6RRA
LNJ410Q6YRA
LNJ810L6DRA
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LNJ311G8TRA Brightness = High Brightness ;; Type 1 = 3216 ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ311G8TRU Brightness = ;; Type 1 = Through The Board ;; Type 2 = ;; Outline (mm) = 3216 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ312G8LRA Brightness = ;; Type 1 = TSS ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ314G8TRA Brightness = ;; Type 1 = Uss ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = Green ;; Remarks = ;; Package =
LNJ316C8TRA Brightness = High Brightness ;; Type 1 = Micro Lens ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ318C8TRU Brightness = ;; Type 1 = Dome Lens ;; Type 2 = ;; Outline (mm) = 3216 ;; Lighting Color = Green ;; Remarks = ;; Package =
LNJ318C8TRU1
LNJ351C4GRA Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ361C3GRA Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ406K54RW Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Ingaalp ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = Amber ;; Remarks = ;; Package =
LNJ406K54RX Brightness = High Brightness ;; Type 1 = S-j ;; Type 2 = Ingaalp ;; Outline (mm) = 2125 ;; Lighting Color = Amber ;; Remarks = ;; Package =
LNJ406K5YRW Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ408K84RA Brightness = High Brightness ;; Type 1 = SS ;; Type 2 = Ingaalp ;; Outline (mm) = 1608 ;; Lighting Color = Amber ;; Remarks = ;; Package =
LNJ408K8YRA Brightness = High Brightness ;; Type 1 = SS ;; Type 2 = Gaalas ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ410Q6YRA Brightness = ;; Type 1 = Side View ;; Type 2 = ;; Outline (mm) = 1.2×2.3 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ411K8YRA Brightness = High Brightness ;; Type 1 = 3216 ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ411K8YRU Brightness = ;; Type 1 = Through The Board ;; Type 2 = ;; Outline (mm) = 3216 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ412K8YRA Brightness = ;; Type 1 = TSS ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ416K54RW Ingaaip S-gw Type
LNJ416Q8YRA Brightness = High Brightness ;; Type 1 = Micro Lens ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ451C44RA Brightness = High Brightness ;; Type 1 = J ;; Type 2 = Ingaalp ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Amber ;; Remarks = ;; Package =

ELJFB2R2KF : Fixed Inductors (chip Inductors)

EEU-FC1J181S : 180F Aluminum Capacitor Radial, Can 63V; CAP ALUM 180UF 63V 20% RADIAL Specifications: Capacitance: 180F ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 5000 Hrs @ 105C ; Size / Dimension: 0.492" Dia (12.50mm) ; Lead Spacing: 0.197" (5.00mm) ; Surface Mount Land Size: - ; Mounting Type: Through Hole ; Package / Case: Radial, Ca

ECD-GZE3R9C : 3.9pF Ceramic Capacitor 0201 (0603 Metric) 25V; CAP CERAMIC 3.9PF 25V C0G 0201 Specifications: Capacitance: 3.9pF ; Voltage - Rated: 25V ; Tolerance: 0.25pF ; Package / Case: 0201 (0603 Metric) ; Temperature Coefficient: C0G, NP0 ; Packaging: Digi-Reel ; Features: High Q, Low Loss ; Lead Spacing: - ; Operating Temperature: -55C ~ 125C ; Mounting Type: Surface Mount, MLCC ;

ELJ-FAR68MF2 : Power Inductors .68UH 20% INDUCTOR FIXED Specifications: Manufacturer: Panasonic ; RoHS:  Details ; Inductance: 680 nH ; Tolerance: 5 % ; Maximum DC Current: 260 mAmps ; Maximum DC Resistance: 0.55 Ohms ; Operating Temperature Range: - 20 C to + 85 C ; Self Resonant Frequency: 135 MHz ; Q Minimum: 25 ; Dimensions: 2.5 mm W x 3.2 mm L

ERA-6AEB5233V : 523K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 523K OHM 1/8W .1% 0805 SMD Specifications: Resistance (Ohms): 523K ; Power (Watts): 0.125W, 1/8W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-14NF6203U : 620K Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 620K OHM 1/2W 1% 1210 SMD Specifications: Resistance (Ohms): 620K ; Power (Watts): 0.5W, 1/2W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C

ERJ-14NF2872U : 28.7K Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 28.7K OHM 1/2W 1% 1210 SMD Specifications: Resistance (Ohms): 28.7K ; Power (Watts): 0.5W, 1/2W ; Tolerance: 1% ; Packaging: Digi-Reel ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant

EXB-34V8R2JV : Resistor 8.2 Ohm 62.5mW 2 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 8.2 OHM 2 RES 0606 Specifications: Resistance (Ohms): 8.2 ; Tolerance: 5% ; Power Per Element: 62.5mW ; Circuit Type: Isolated ; Number of Pins: 4 ; Packaging: Digi-Reel ; Number of Resistors: 2 ; Package / Case: 0606 (1616 Metric), Convex ; Mounting Type: Surface Mount ; Temperature Coefficient: 200ppm/C ; Lead F

ERJ-2RKF43R0X : 43 Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 43.0 OHM 1/10W 1% 0402 SMD Specifications: Resistance (Ohms): 43 ; Power (Watts): 0.1W, 1/10W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-1TYJ470U : 47 Ohm 1W Chip Resistor - Surface Mount; RES 47 OHM 1W 5% 2512 SMD Specifications: Resistance (Ohms): 47 ; Power (Watts): 1W ; Tolerance: 5% ; Packaging: Digi-Reel ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

EXB24AB0GR8X : 0 MHz - 2500 MHz RF/MICROWAVE FIXED ATTENUATOR Specifications: Attenuator Type: Fixed ; Frequency: 0.0 to 2.5 GHz ; VSWR: 1.5 1 ; Attenuation: 0.0 dB

 
0-C     D-L     M-R     S-Z