Details, datasheet, quote on part number: LNJ312G8LRA
PartLNJ312G8LRA
CategoryOptoelectronics => Display => LEDs => LED Lamps => Chip LEDs
TitleChip LEDs
DescriptionBrightness = ;; Type 1 = TSS ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LNJ312G8LRA datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Conventional Part No. Global Prat No. Lighting Color
Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec
Lighting Color Red Green Amber Orange Soft Orange IO IF

Typ Red Diffused 6.7 Green Diffused 3.0 Green Diffused 5.0 Yellow Diffused 1.5 Orange Diffused 1.0 Yellow Diffused 1.0 mcd -


Forward Current Relative Luminous Intensity Wavelength Characteristics
Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Related products with the same datasheet
LNJ312G8TRA
LNJ412K8YRA
LNJ812K8SRA
LNJ812R8DRA
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LNJ312G8TRA Brightness = ;; Type 1 = TSS ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ314G8TRA Brightness = ;; Type 1 = Uss ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = Green ;; Remarks = ;; Package =
LNJ316C8TRA Brightness = High Brightness ;; Type 1 = Micro Lens ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ318C8TRU Brightness = ;; Type 1 = Dome Lens ;; Type 2 = ;; Outline (mm) = 3216 ;; Lighting Color = Green ;; Remarks = ;; Package =
LNJ318C8TRU1
LNJ351C4GRA Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ361C3GRA Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ406K54RW Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Ingaalp ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = Amber ;; Remarks = ;; Package =
LNJ406K54RX Brightness = High Brightness ;; Type 1 = S-j ;; Type 2 = Ingaalp ;; Outline (mm) = 2125 ;; Lighting Color = Amber ;; Remarks = ;; Package =
LNJ406K5YRW Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ408K84RA Brightness = High Brightness ;; Type 1 = SS ;; Type 2 = Ingaalp ;; Outline (mm) = 1608 ;; Lighting Color = Amber ;; Remarks = ;; Package =
LNJ408K8YRA Brightness = High Brightness ;; Type 1 = SS ;; Type 2 = Gaalas ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ410Q6YRA Brightness = ;; Type 1 = Side View ;; Type 2 = ;; Outline (mm) = 1.2×2.3 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ411K8YRA Brightness = High Brightness ;; Type 1 = 3216 ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ411K8YRU Brightness = ;; Type 1 = Through The Board ;; Type 2 = ;; Outline (mm) = 3216 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ412K8YRA Brightness = ;; Type 1 = TSS ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ416K54RW Ingaaip S-gw Type
LNJ416Q8YRA Brightness = High Brightness ;; Type 1 = Micro Lens ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ451C44RA Brightness = High Brightness ;; Type 1 = J ;; Type 2 = Ingaalp ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Amber ;; Remarks = ;; Package =
LNJ451C4XRA Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ461C34RA Brightness = High Brightness ;; Type 1 = GW ;; Type 2 = Ingaalp ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Amber ;; Remarks = ;; Package =

EEUFC1A470 : Aluminum Electrolytic Capacitors/fc

ELJEA2N2DF : Chip Inductors

EEE-TG1A332M : 3300F Aluminum Capacitor Radial, Can - SMD 10V; CAP ALUM 3300UF 10V 20% SMD Specifications: Capacitance: 3300F ; ESR (Equivalent Series Resistance): 75.0 mOhm ; Features: General Purpose ; Lifetime @ Temp.: 2000 Hrs @ 125C ; Size / Dimension: 0.709" Dia (18.00mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.748" L x 0.748" W (19.00mm x 19.00mm) ; Mounting Type: Surface

ELL-CTV271M : Fixed Inductors, Coils, Choke 270H 810mA 0.472" L x 0.472" W x 0.177" H (12.00mm x 12.00mm x 4.50mm) -; CHOKE COIL 270UH 810MA SMD Specifications: Inductance: 270H ; Tolerance: 20% ; Package / Case: 0.472" L x 0.472" W x 0.177" H (12.00mm x 12.00mm x 4.50mm) ; Packaging: Digi-Reel ; Type: - ; Current: 810mA ; Mounting Type: Surface Mount ; Q @ Freq: - ; Frequency - Self Resonant: - ; DC Resistance (DCR): 400 mOhm ; Shielding

ERJ-3EKF1601V : 1.6K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 1.60K OHM 1/10W 1% 0603 SMD Specifications: Resistance (Ohms): 1.6K ; Power (Watts): 0.1W, 1/10W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERD-S2TJ113V : 11K Ohm 0.25W, 1/4W Through Hole Resistors; RES 11K OHM CARBON FILM 1/4W 5% Specifications: Resistance (Ohms): 11K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 5% ; Packaging: Cut Tape (CT) ; Composition: Carbon Film ; Temperature Coefficient: -150/ -350ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-3EKF1333V : 133K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 133K OHM 1/10W 1% 0603 SMD Specifications: Resistance (Ohms): 133K ; Power (Watts): 0.1W, 1/10W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-P14J304U : 300K Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES ANTI-SURGE 300K OHM 5% 1210 Specifications: Resistance (Ohms): 300K ; Power (Watts): 0.5W, 1/2W ; Tolerance: 5% ; Packaging: Digi-Reel ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ELB4B566 : LOW PASS FILTER Specifications: Filter Type: Low Pass

 
0-C     D-L     M-R     S-Z