Details, datasheet, quote on part number: LNJ408K84RA
PartLNJ408K84RA
CategoryOptoelectronics => Display => LEDs => LED Lamps => Chip LEDs
TitleChip LEDs
DescriptionBrightness = High Brightness ;; Type 1 = SS ;; Type 2 = Ingaalp ;; Outline (mm) = 1608 ;; Lighting Color = Amber ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LNJ408K84RA datasheet
Quote
Find where to buy
 
  

 

Features, Applications
Ultra Hight Bright Surface Mounting Chip LED
Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec

s Electro-Optical Characteristics (Ta = 25°C) Conventional Lighting IO Lens Color Part No. Color Typ Min LNJ408K84RA Amber Yellow Diffused 4.0 LNJ808R88RA Orange Red Diffused 6.5 2.5 Unit mcd 10 mA Typ 1.9 V Max V P Typ 620 nm Typ 10 mA Max 4 V





Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Related products with the same datasheet
LNJ808R88RA
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LNJ408K8YRA Brightness = High Brightness ;; Type 1 = SS ;; Type 2 = Gaalas ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ410Q6YRA Brightness = ;; Type 1 = Side View ;; Type 2 = ;; Outline (mm) = 1.2×2.3 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ411K8YRA Brightness = High Brightness ;; Type 1 = 3216 ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ411K8YRU Brightness = ;; Type 1 = Through The Board ;; Type 2 = ;; Outline (mm) = 3216 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ412K8YRA Brightness = ;; Type 1 = TSS ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ416K54RW Ingaaip S-gw Type
LNJ416Q8YRA Brightness = High Brightness ;; Type 1 = Micro Lens ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ451C44RA Brightness = High Brightness ;; Type 1 = J ;; Type 2 = Ingaalp ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Amber ;; Remarks = ;; Package =
LNJ451C4XRA Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ461C34RA Brightness = High Brightness ;; Type 1 = GW ;; Type 2 = Ingaalp ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Amber ;; Remarks = ;; Package =
LNJ461C3XRA Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ717W80RA Brightness = High Brightness ;; Type 1 = TSS-3 ;; Type 2 = Tri Color ;; Outline (mm) = 1.6×2.1 ;; Lighting Color = Pure Green/soft Orange/blue ;; Remarks = ;; Package =
LNJ806K5SRW Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ806K5SRX Brightness = High Brightness ;; Type 1 = S-j ;; Type 2 = Gaalas ;; Outline (mm) = 2125 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ806R58RW Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Ingaalp ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = Amber ;; Remarks = ;; Package =
LNJ806R58RX Brightness = High Brightness ;; Type 1 = S-j ;; Type 2 = Ingaalp ;; Outline (mm) = 2125 ;; Lighting Color = Amber ;; Remarks = ;; Package =
LNJ808K8SRA Brightness = High Brightness ;; Type 1 = SS ;; Type 2 = Gaalas ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ808R88RA Brightness = High Brightness ;; Type 1 = SS ;; Type 2 = Ingaalp ;; Outline (mm) = 1608 ;; Lighting Color = Amber ;; Remarks = ;; Package =
LNJ808R8ERA Brightness = High Brightness ;; Type 1 = SS ;; Type 2 = Gaalas ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ810L6DRA Brightness = ;; Type 1 = Side View ;; Type 2 = ;; Outline (mm) = 1.2×2.3 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ812K8SRA Brightness = ;; Type 1 = TSS ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =

ECOS1KA122CA : Large Can Aluminum Electrolytic Capacitors

EEFFD0G390R : Specialty Polymer Aluminum Electrolytic Capacitor

EEV-HA1V100WR : 100µF Aluminum Capacitor Radial, Can - SMD 35V; CAP ALUM 100UF 35V 20% SMD Specifications: Capacitance: 100µF ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 2000 Hrs @ 105°C ; Size / Dimension: 0.315" Dia (8.00mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.327" L x 0.327" W (8.30mm x 8.30mm) ; Mounting Type: Surface Mount ; Pack

EEF-LX0D331R4 : 330µF Aluminum Capacitor 2917 (7343 Metric) 2V; CAP ALUM 330UF 2V 20% SMD Specifications: Capacitance: 330µF ; ESR (Equivalent Series Resistance): 6.0 mOhm ; Features: Polymer ; Lifetime @ Temp.: 1000 Hrs @ 105°C ; Size / Dimension: 0.287" L x 0.169" W (7.30mm x 4.30mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.287" L x 0.169" W (7.30mm x 4.30mm) ; Mounting Type: Sur

EEU-FC1V681 : 680µF Aluminum Capacitor Radial, Can 35V; CAP ALUM 680UF 35V 20% RADIAL Specifications: Capacitance: 680µF ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 5000 Hrs @ 105°C ; Size / Dimension: 0.492" Dia (12.50mm) ; Lead Spacing: 0.197" (5.00mm) ; Surface Mount Land Size: - ; Mounting Type: Through Hole ; Package / Case: Radial, Ca

ERA-3AEB1653V : 165K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 165K OHM 1/10W .1% 0603 SMD Specifications: Resistance (Ohms): 165K ; Power (Watts): 0.1W, 1/10W ; Tolerance: ±0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: ±25ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-12SF9091U : 9.09K Ohm 0.75W, 3/4W Chip Resistor - Surface Mount; RES 9.09K OHM 3/4W 1% 2010 SMD Specifications: Resistance (Ohms): 9.09K ; Power (Watts): 0.75W, 3/4W ; Tolerance: ±1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant

MAZ20620AG : Diode - Zener - Single Discrete Semiconductor Product 20µA @ 3V 6.2V 1W Through Hole; DIODE ZENER 6.2V 1W DO-41 Specifications: Voltage - Zener (Nom) (Vz): 6.2V ; Power - Max: 1W ; Impedance (Max) (Zzt): 6 Ohm ; Voltage - Forward (Vf) (Max) @ If: 1V @ 200mA ; Current - Reverse Leakage @ Vr: 20µA @ 3V ; Tolerance: - ; Mounting Type: Through Hole ; Package / Case: DO-204AL, DO-41, Axial ; Packaging: Cut Tape (C

EYG-N0912QE3S : Thermal Interface Products PGS10um+NASBIS1000um 90mmx115mm Panasonic "NASBIS" Insulating Sheets are flexible heat insulating sheets composed of proprietary silica aerogel and fiber. Structured into nanoscale hollow particles, the high-porous sheet has a thermal conductivity of roughly 0.02 W/m-K, making it an excellent insulator. The NASBIS has a lower t

Same catergory

BA5961FV : Optical Drivers. is 1ch BTL driver IC for tilt coil driving used for DVD-ROM / DVD-RAM / CD-ROM / CD-RW. 2 general-purpose operational amplifiers are integrated into the small package, this IC has achieved a reduction of its size, and external components. This IC can be used not only for tilt coil, but also for wide variety of applications. ! 1) 1ch BTL driver. 2) SSOP-B20W.

LC7582E : LCD Driver.

LGK389-FO : Green 3mm Led. Besondere Merkmale Gehäusetyp: eingefärbtes, klares mm (T1) Gehäuse mit spezieller Linse Besonderheit des Bauteils: hohe Lichtstärke bei kleinen Strömen; mit Einsatz eines äußeren Reflektors zur Hinterleuchtung von Leuchtfeldern und LCD-Anzeigen; Lötspieße mit Aufsetzebene Wellenlänge: 628 nm (super-rot), 590 nm (gelb), 570 nm (grün) Abstrahlwinkel:.

LJ2421-21EWRN : Emitting Color: Green , Material: Gap , Wavelength(nm): 572. LJ 24X1-21 SINGLE COLOR ANODE ROW (STANDARD CIRCUIT) ROW NO. (ANODE) PIN NO. COLUMN NO. (CATHODE) PIN NO. LJ 24X1-23 SINGLE COLOR ANODE ROW (SPECIAL CIRCUIT) ROW NO. (ANODE) PIN NO. COLUMN NO. (CATHODE) PIN NO. .

PC112L : Long Creepage Distance Type Photocoupler. 1. Long creepage distance type ( Creepage distance 8mm or more *1 2. Internal insulation distance 0.5mm or more 3. Recognized by UL(No. E64380) Approved by VDE DIN-VDE0884 : No. 77292 ) Approved by BSI 7421 ) Approved by SEMKO PC110L : No. PC111L : No. PC112L : No. PC113L : No. 8705121 ) Approved by DEMKO ( No. ) 4. High collector-emitter voltage ( VCEO.

PD-S30M : Infrared.

R3292-01 : Photomultiplier Tubes. 28 (X) + 28 (Y) Crossed Wire Anode, 5 Inch Diameter, 12-Stage, Bialkali Photocathode, Head-On Parameter Spectral Response Wavelength of Maximum Response Material Photocathode Minimum Effective Area Material Window Shape Structure Dynode Number of Stages Anode Number of Wires /Value 650 420 Bialkali 100 Borosilicate glass Plano-plano Proximity mesh 12 28 (X) +28 (Y) Unit.

SA08-13GWA : Material: Gap , Wavelength: 568nm. !0.8 INCH DIGIT HEIGHT. !LOW CURRENT OPERATION. !EXCELLENT CHARACTER APPEARANCE. ! EASY The Green source color devices are made with Gallium Phosphide GreenLight Emitting Diode. !I.C. COMPATIBLE. !CATEGORIZED FOR LUMINOUS INTENSITY. !MECHANICALLY RUGGED. ! STANDARD Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless.

SFH310 : Silicon NPN Phototransistor. Wesentliche Merkmale Speziell geeignet für Anwendungen im Bereich von 400 nm bis 1100 nm (SFH 310) und bei 880 nm (SFH 310 FA) Hohe Linearität 3 mm-Plastikbauform Anwendungen Lichtschranken für Gleich- und Wechsellichtbetrieb Industrieelektronik ,,Messen/Steuern/Regeln" Typ Type SFH 310 SFH 310-2/3 SFH 310 FA SFH 310 FA-2/3 Bestellnummer Ordering Code.

TSOP48SO1 : Photo Modules For PCM Remote Control Systems. The TSOP48.SO1 ­ series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. TSOP48.SO1 is the standard IR remote control receiver series, supporting all major transmission.

W53BR5.08/SGD : Material: Gap , Wavelength: 568nm. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. !CATHODE IS CLEARLY IDENTIFIED ON PACKAGE. !SUITABLE FOR BACK PANEL ILLUMINATION, CIRCUIT Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance ± 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package.

GP1UE261XKVF : Infrared Receivers Rem Cont Receiver 3V 38 kHz. s: Manufacturer: Sharp Microelectronics ; Product Category: Infrared Receivers ; RoHS:  Details ; Carrier Frequency: 38 KHz ; High Level Pulse Width: 1200 us ; Low Level Pulse Width: 1000 us ; Minimum High Level Output Voltage: 2.2 V ; Operating Voltage: 2.7 V to 5.5 V ; Supply Current: 0.27 mA ; Maximum.

CL-750-CAN15-PC : Optics - LEDs, Lamps - Lenses -; INTEMATIX CHROMALIT CANDLE. s: Color: - ; For Use With/Related Products: - ; Lens Style/Size: Round with Domed Top, 9.5mm ; Viewing Angle: - ; Mounting Type: - ; Type: Remote Phosphor Light Source ; Optical Pattern: - ; Number of LEDs: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

SLR343EC4TT32 : LEDs -; LED 3.1MM 525NM GREEN TRANSPAREN. s: Color: Blue ; Lens Style/Size: Round with Domed Top, 3.1mm ; Millicandela Rating: 1500mcd ; Voltage - Forward (Vf) Typ: 3.2V ; Wavelength - Dominant: 525nm ; Wavelength - Peak: - ; Current - Test: 20mA ; Viewing Angle: 40° ; Lens Type: Clear ; Luminous Flux @ Current - Test: - ; Package / Case: Radial ; Mounting.

LDS-C404RI : 7-Segment White 14-DIP (0.300", 7.62mm), 10 Leads 1 digit 0.40" (10.16mm) Display Modules - LED Character and Numeric; LED 7SEG .40" SGL 625NM RED CC. s: Display Type: 7-Segment ; Color: White ; Package / Case: 14-DIP (0.300", 7.62mm), 10 Leads ; Number of Digits/Alpha: 1 ; Size / Dimension: 0.74" L x 0.39" W x 0.20" H (18.75mm x 9.85mm x 5.08mm) ; Common.

551-1207-010F : LED , Round with Domed Top, 3mm 1.8V 2mA Yellow Through Hole, Right Angle; LED CBI 3MM YELLOW LOW CURR .200. s: Color: Yellow ; Mounting Type: Through Hole, Right Angle ; Configuration: Single ; Voltage Rating: 1.8V ; Current: 2mA ; Lens Style/Size: Round with Domed Top, 3mm ; Packaging: Bulk ; Lens Type: Diffused, Tinted ; Lead Free Status: Lead Free.

591-2201-002F : LED , Round with Domed Top, 3mm 2V 10mA Green *; LED PRISM 3MM RND HI INT GRN SMD. s: Color: Green ; Mounting Type: * ; Configuration: Single ; Voltage Rating: 2V ; Current: 10mA ; Lens Style/Size: Round with Domed Top, 3mm ; Packaging: * ; Lens Type: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

SI-B8T111550WW : LED 4000K 80CRI LM561B. s: Family: LED Lighting - COBs, Engines, Modules ; Series: LT-M552A ; Packaging  : Tray   ; Type: LED Module ; Color: White, Neutral ; CCT (K): 4000K 3-Step MacAdam Ellipse ; Wavelength: - ; Configuration: Linear Light Strip ; Flux @ Current/Temperature - Test: 1530 lm (Typ) ; Current - Test: 450mA ; Temperature.

VCDG1104P-5C63C-TR : LED GREEN CLEAR SMD. Stanley Electric’s long history of producing reliable products has yet again come out with a durable creation in the 1104P series LED. Stanley’s original lens technology allows for a narrow distribution resulting in high brightness while using only 3.0 V at 5 mA or 1.9V at 20 mA. The compact 0603 package size allows.

 
0-C     D-L     M-R     S-Z