Details, datasheet, quote on part number: LNJ861C3DRA
PartLNJ861C3DRA
CategoryOptoelectronics => Display => LEDs => LED Lamps => Chip LEDs
TitleChip LEDs
DescriptionBrightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LNJ861C3DRA datasheet
  

 

Features, Applications

Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec

s Electro-Optical Characteristics (Ta = 25C) Conventional Part No. LN1261C - (TR) LN1361C - (TR) LN1461C - (TR) LN1861C - (TR) Unit





Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Related products with the same datasheet
LN1361CTR
LN1461CTR
LN1861CTR
LNJ261C3RRA
LNJ361C3GRA
LNJ461C3XRA
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LNJ861L3SRA GW Type
LNJ906W5BRW Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Blue ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = Blue ;; Remarks = ;; Package =
LNJ906W5BRX Brightness = High Brightness ;; Type 1 = S-j ;; Type 2 = Blue ;; Outline (mm) = 2125 ;; Lighting Color = Blue ;; Remarks = ;; Package =
LNJ951C4BRA Brightness = High Brightness ;; Type 1 = J ;; Type 2 = Blue ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Blue ;; Remarks = ;; Package =
LNM111AP01B Numeric Display Visible Light Emitting Diode. Numeric Size (25.4mm, 1inch, 1-Element Type)
LNM116AP01 Numeric Size (mm) = 14.4 ;; Numeric Size (inch) = 0.6 ;; Element = 1 ;; Brightness = ;; Lighting Color = Red ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM11AP01B Numeric Size (mm) = 25.4 ;; Numeric Size (inch) = 1 ;; Element = 1 ;; Brightness = ;; Lighting Color = Orange ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM126AP01 Numeric Size (mm) = 14.4 ;; Numeric Size (inch) = 0.6 ;; Element = 2 ;; Brightness = ;; Lighting Color = Red ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM213AA01 Numeric Size (mm) = 7.6 ;; Numeric Size (inch) = 0.3 ;; Element = 1 ;; Brightness = ;; Lighting Color = Green ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM213AM01B Numeric Size (mm) = 8 ;; Numeric Size (inch) = 0.3 ;; Element = 1 ;; Brightness = ;; Lighting Color = Green ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM213KA01 Numeric Size (mm) = 7.6 ;; Numeric Size (inch) = 0.3 ;; Element = 1 ;; Brightness = ;; Lighting Color = Green ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM213KM01B Numeric Size (mm) = 8 ;; Numeric Size (inch) = 0.3 ;; Element = 1 ;; Brightness = ;; Lighting Color = Green ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM213KS01 Numeric Size (mm) = 7.6 ;; Numeric Size (inch) = 0.3 ;; Element = 1 ;; Brightness = ;; Lighting Color = Green ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM214AA01 Numeric Size (mm) = 11 ;; Numeric Size (inch) = 0.4 ;; Element = 1 ;; Brightness = ;; Lighting Color = Green ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM216AA01 Numeric Size (mm) = 14.4 ;; Numeric Size (inch) = 0.6 ;; Element = 1 ;; Brightness = ;; Lighting Color = Green ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM218AA03 Numeric Size (mm) = 20.32 ;; Numeric Size (inch) = 0.8 ;; Element = 1 ;; Brightness = ;; Lighting Color = Green ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM223AP01 Numeric Size (mm) = 8.4 ;; Numeric Size (inch) = 0.3 ;; Element = 2 ;; Brightness = ;; Lighting Color = Red ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM223AS01 Numeric Size (mm) = 8 ;; Numeric Size (inch) = 0.3 ;; Element = 2 ;; Brightness = ;; Lighting Color = Red ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM223KP01 Numeric Size (mm) = 8.4 ;; Numeric Size (inch) = 0.3 ;; Element = 2 ;; Brightness = ;; Lighting Color = Red ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM223KS01 Numeric Size (mm) = 8 ;; Numeric Size (inch) = 0.3 ;; Element = 2 ;; Brightness = ;; Lighting Color = Red ;; Common Terminal = Anode ;; Remarks = ;; Package =
LNM224AA01 Numeric Size (mm) = 11 ;; Numeric Size (inch) = 0.4 ;; Element = 2 ;; Brightness = ;; Lighting Color = Green ;; Common Terminal = Anode ;; Remarks = ;; Package =

ELJFB271F : Fixed Inductors (chip Inductors)

EET-ED2D681CA : 680F Aluminum Capacitor Radial, Can - Snap-In 200V; CAP ALUM 680UF 200V 20% SNAP Specifications: Capacitance: 680F ; ESR (Equivalent Series Resistance): 219.0 mOhm ; Features: General Purpose ; Lifetime @ Temp.: 3000 Hrs @ 105C ; Size / Dimension: 0.984" Dia (25.00mm) ; Lead Spacing: 0.394" (10.00mm) ; Surface Mount Land Size: - ; Mounting Type: Through Hole ; Package / Case:

ERJ-8ENF1181V : 1.18K Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 1.18K OHM 1/4W 1% 1206 SMD Specifications: Resistance (Ohms): 1.18K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-1GEF10R0C : 10 Ohm 0.05W, 1/20W Chip Resistor - Surface Mount; RES 10.0 OHM 1/20W 1% 0201 SMD Specifications: Resistance (Ohms): 10 ; Power (Watts): 0.05W, 1/20W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-1GEF2741C : 2.74K Ohm 0.05W, 1/20W Chip Resistor - Surface Mount; RES 2.74K OHM 1/20W 1% 0201 SMD Specifications: Resistance (Ohms): 2.74K ; Power (Watts): 0.05W, 1/20W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-1TNF2743U : 274K Ohm 1W Chip Resistor - Surface Mount; RES 274K OHM 1W 1% 2512 SMD Specifications: Resistance (Ohms): 274K ; Power (Watts): 1W ; Tolerance: 1% ; Packaging: Digi-Reel ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

EXB-28V623JX : Resistor 62K Ohm 31mW 4 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 62K OHM 4 RES 0804 Specifications: Resistance (Ohms): 62K ; Tolerance: 5% ; Power Per Element: 31mW ; Circuit Type: Isolated ; Number of Pins: 8 ; Packaging: Digi-Reel ; Number of Resistors: 4 ; Package / Case: 0804 (2010 Metric), Convex ; Mounting Type: Surface Mount ; Temperature Coefficient: 200ppm/C ; Lead Fre

XP0621000L : Transistor (bjt) - Arrays, Pre-biased Discrete Semiconductor Product 100mA 50V 150mW 2 NPN - Pre-Biased (Dual); TRANS ARRAY NPN/NPN W/RES SMINI6 Specifications: Transistor Type: 2 NPN - Pre-Biased (Dual) ; Voltage - Collector Emitter Breakdown (Max): 50V ; Current - Collector (Ic) (Max): 100mA ; Power - Max: 150mW ; Resistor - Base (R1) (Ohms): 47K ; Resistor - Emitter Base (R2) (Ohms): - ; Vce Saturation (Max) @ Ib, Ic: 250mV @ 300A, 10mA

 
0-C     D-L     M-R     S-Z