Details, datasheet, quote on part number: MA6S121
CategoryDiscrete => Diodes & Rectifiers => Switching Diodes
DescriptionMarking = M2D ;; V<SUB>R</SUB>(V) = 80 ;; I<SUB>F</SUB>(mA) = 100 ;; I<SUB>R</SUB>(nA) = 100 ;; T<SUB>rr</SUB>(ns) = 3 ;; Package = SMini6-F1
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload MA6S121 datasheet
Find where to buy


Features, Applications

Small S-mini type 6-pin package Three isolated elements contained in one package, allowing highdensity mounting Flat lead type, resulting in improved mounting efficiency and solderability with the high-speed mounting machine Short reverse recovery time trr Small terminal capacitance, Ct

Parameter Reverse voltage (DC) Peak reverse voltage Average forward current*1 Peak forward current*1 Non-repetitive peak forward surge current*1,2 Junction temperature Storage temperature Note) *1 : Value for single diode *2

Parameter Reverse current (DC) Forward voltage (DC) Reverse voltage (DC) Terminal capacitance Reverse recovery time* Symbol VR Ct trr = 1 MHz = 10 mA, 6 V Irr = 0.1 IR, RL Conditions Min Typ Max 0.1 1.2 Unit pF ns

Note) 1. Rated input/output frequency: 100 MHz * : trr measuring circuit
Bias Application Unit tr 10% Input Pulse t IF trr t Irr = 100 Output Pulse
Note) The part number in the parenthesis shows conventional part number.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.


Related products with the same datasheet
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
MA6S718 VRM(V) = 30 ;; IF(mA) = 30 ;; VFmax.(V) = 0.4 ;; IR(µA) = 1 ;; Package = SMini6-F1
MA6X078 VR(V) = 35 ;; IF(mA) = 100 ;; Package = Mini6-G1
MA6X121 Marking = M2D ;; VR(V) = 80 ;; IF(mA) = 100 ;; IR(nA) = 100 ;; Trr(ns) = 3 ;; Package = Mini6-G1
MA6X122 Marking = M2A ;; VR(V) = 80 ;; IF(mA) = 100 ;; IR(nA) = 100 ;; Trr(ns) = 10 ;; Package = Mini6-G2
MA6X123 Marking = M2B ;; VR(V) = 80 ;; IF(mA) = 100 ;; IR(nA) = 100 ;; Trr(ns) = 3 ;; Package = Mini6-G2
MA6X124 Marking = M2C ;; VR(V) = 80 ;; IF(mA) = 100 ;; IR(nA) = 100 ;; Trr(ns) = 3 ;; Package = Mini6-G2
MA6X125 Marking = M2I ;; VR(V) = 40 ;; IF(mA) = 100 ;; IR(nA) = 100 ;; Trr(ns) = ;; Package = Mini6-G1
MA6X126 Marking = M2S ;; VR(V) = 80 ;; IF(mA) = 100 ;; IR(nA) = 100 ;; Trr(ns) = ;; Package = Mini6-G1
MA6X127 Marking = M2U ;; VR(V) = 80 ;; IF(mA) = 100 ;; IR(nA) = 100 ;; Trr(ns) = 10 ;; Package = Mini6-G2
MA6X128 Marking = M2V ;; VR(V) = 80 ;; IF(mA) = 100 ;; IR(nA) = 100 ;; Trr(ns) = 3 ;; Package = Mini6-G2
MA6X129 VR(V) = 200 ;; IF(mA) = 200 ;; Package = Mini6-G1
MA6X344 Marking = 5P ;; VR(V) = 30 ;; IF(mA) = 20 ;; Package = Mini6-G1
Same catergory

2N2904DCSM : Screening Options Available = ;; Polarity = PNP ;; Package = LCC2 (MO-041BB) ;; Vceo = 60V ;; IC(cont) = 0.6A ;; HFE(min) = 40 ;; HFE(max) = 120 ;; @ Vce/ic = 10V / 150mA ;; FT = 200MHz ;; PD = 0.5W.

2SK3270-01 : Low voltage. N-channel MOSFET. This material and the information herein is the property of Fuji Electric Co.,Ltd. They shall be neither reproduced, copied, lent, or disclosed in any way whatsoever for the use of any third party nor used for the manufacturing purposes without the express written consent of Fuji Electric Co.,Ltd. This specifies Fuji Power MOSFET 2SK3270-01 N-Channel.

BAS70-07 : SMD Diodes For Clamping, Rectifying, Protection And Switching Applications.

BCR148U : Complex af Transistors With Built-in Resistor Networks. Symbol VCEO VCBO VEBO Vi(on) IC Ptot Tj Tstg Collector-emitter voltage Collector-base voltage Emitter-base voltage Input on Voltage DC collector current Total power dissipation, 118 °C Junction temperature Storage temperature Thermal Resistance Junction - soldering point 1) RthJS 1For calculation of R thJA please refer to Application Note Thermal Resistance.

BDW93A : NPN Epitaxial Silicon Transistor. Absolute Maximum Ratings TC=25°C unless otherwise noted Symbol VCBO Parameter Collector-Base Voltage : BDW93C VCEO Collector-Emitter Voltage : BDW93C Collector Current (DC) *Collector Current (Pulse) Base Current Collector Dissipation (TC=25°C) Junction Temperature Storage Temperature °C Value Units Symbol Rjc Parameter Thermal Resistance Junction to Case.

CM30MD-12H : Igbt Modules Medium Power Switching Use Insulated Type. ”IC 30A ”VCES 600V ”Insulated Type ”CIB Module 3 Inverter+3 Converter+Brake ”UL Recognized Yellow Card No. E80276 (N) File No. E80271 APPLICATION & DC motor controls, General purpose inverters, Servo controls, NC, Robotics Symbol VCES VGES IC ICM IE (Note. 1) IEM (Note. 1) PC (Note. 3) Parameter Collector-emitter voltage Gate-emitter voltage Collector.

GBPC25005 : . Plastic material has Underwriters Laboratory Flammability Classification 94V-O The plastic package has Underwriters Laboratory Flammability Classification 94V-O. Surge overload ratings to 300 Amperes. Case:Molded plastic with heatsink integrally mounthed in the bringe encapsulation. Mounting position: Any Weight: 1 ounce, 30 grams Therminals: Plated.

MJF18002 : Power Transistor 2.0 Amperes 1000 Volts 25 And 50 Watts. NPN Bipolar Power Transistor For Switching Power Supply Applications The MJE/MJF18002 have an applications specific state­of­the­art die designed for use 220 V line operated Switchmode Power supplies and electronic light ballasts. These high voltage/high speed transistors offer the following: Improved Efficiency Due to Low Base Drive Requirements: High.

SI-8201L : Switching Type ( Self Oscillation Type With Coil ). Integrated switching IC and coil construction Requires 2 external components only Low switching noise Heatsink not required Applications q For power supplies in telephone sets q For power supplies in office equipment Ratings Parameter Symbol 8200L Series 8300L Series Unit Ratings Parameter Symbol 8200L Series 8300L Series Unit SI-8303L DC Input Voltage.

UPA837TF : Amplifier. NPN Silicon Eptiaxial Twin Transistor. SMALL PACKAGE OUTLINE: SOT-363 package measures just 1.25 mm LOW HEIGHT PROFILE: Just 0.60 mm high TWO DIFFERENT DIE TYPES: Q1 - Ideal oscillator transistor Q2 - Ideal buffer amplifier transistor The UPA837TF contains one NE686 and one NE688 NPN high frequency silicon bipolar chip. NEC's new low profile TF package is ideal for all portable wireless.

IXTQ120N15P : Polar N-channel MOSFETs International standard packages 􀁺 Unclamped Inductive Switching (UIS) rated 􀁺 Low package inductance - easy to drive and to protect.

0603N221G201PT : CAPACITOR, CERAMIC, MULTILAYER, 200 V, C0G, 0.00022 uF, SURFACE MOUNT, 0603. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Dielectric: Ceramic Composition ; RoHS Compliant: Yes ; Capacitance Range: 2.20E-4 microF ; Capacitance Tolerance: 2 (+/- %) ; WVDC: 200 volts ; Temperature Coefficient: 30 ppm/Ā°C ; Mounting Style: Surface.

08055G683ZAT2A : CAPACITOR, CERAMIC, MULTILAYER, 50 V, Y5V, 0.068 uF, SURFACE MOUNT, 0805. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Applications: General Purpose ; Electrostatic Capacitors: Ceramic Composition ; RoHS Compliant: Yes ; Capacitance Range: 0.0680 microF ; Capacitance Tolerance: 80 (+/- %) ; WVDC: 50 volts ; Mounting Style:.

CCF02100KFKE36 : RESISTOR, METAL FILM, 2 W, 1 %, 100 ppm, 100000 ohm, THROUGH HOLE MOUNT. s: Category / Application: General Use ; Technology / Construction: MetalFilm ; Mounting / Packaging: ThroughHole, Axial Leads, AXIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT ; Resistance Range: 100000 ohms ; Tolerance: 1 +/- % ; Temperature Coefficient: 100 Ā±ppm/Ā°C ; Power Rating:.

GP3062-100MLF : 1 ELEMENT, 10 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD. s: Mounting Option: Surface Mount Technology ; Devices in Package: 1 ; Core Material: Ferrite ; Lead Style: WRAPAROUND ; Molded / Shielded: Shielded ; Application: General Purpose, Power Choke ; Inductance Range: 10 microH ; Rated DC Current: 1400 milliamps ; Operating Temperature:.

31660 : DATACOM TRANSFORMER FOR GENERAL PURPOSE APPLICATION(S). s: Category: Signal ; Other Transformer Types / Applications: Pulse Transformers, DATACOM TRANSFORMER ; Mounting: Chip Transformer.

0-C     D-L     M-R     S-Z