Details, datasheet, quote on part number: UN10004
PartUN10004
CategoryPower Management => Protection and Isolation => Circuit Protector Elements
TitleCircuit Protector Elements
DescriptionRated Current(A) = 0.4 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 190 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C) = -55 to +125 ;; Package = M-A1
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload UN10004 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Parameter Operating ambient temperature Storage temperature Symbol Topr Tstg Rating to +125 Unit C

Parameter Rated voltage Rated current Internal resistance Cutoff current Standard temperature rise 143 Min Typ Max Unit m C

Package shall be overheated and dangerous for overcurrent. This device should be used only to the secondary circuit. Package will be damaged for added overpower. This device is not electrical fuse legally. Please draw a clear line between electrical fuse from this device.

Note) The part number in the parenthesis shows conventional part number.

Sharp cutoff characteristics and low voltage drop Flame retardant package and low heat generation. The package is molded with high dimensional accuracy.

Features

Request for your special attention and precautions in using the technical information and semiconductors described in this book

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this book and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this book is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this book. (4) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.


 

Related products with the same datasheet
UNH1104
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
UN10006 Rated Current(A) = 0.6 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 100 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN10008 Rated Current(A) = 0.8 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 80 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN10010 Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 60 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN10015 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 38 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN10020 Rated Current(A) = 2.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 30 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN10027 Rated Current(A) = 2.7 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 22 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11004 Rated Current(A) = 0.4 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 180 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11006 Rated Current(A) = 0.6 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 95 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11008 Rated Current(A) = 0.8 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 73 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11010 Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 56 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11015 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 33 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11020 Rated Current(A) = 2.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 26 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11027 Rated Current(A) = 2.7 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 18 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN1110 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1
UN1121 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.5 ;; PT(W) = 0.6 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = M-A1
UN1210 Marking = ;; VCEO(V) = 50 ;; IC(A) = 0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1
UN1221 Marking = ;; VCEO(V) = 50 ;; IC(A) = 0.5 ;; PT(W) = 0.6 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = M-A1
UN1231 Marking = ;; VCEO(V) = 20 ;; IC(A) = 0.7 ;; PT(W) = 0.01 ;; R1(kW ) = 1 ;; R2(kW ) = 0.021 ;; Package = M-A1
UN206 VCEO(V) = 18 ;; IC(A) = 1 ;; PT(W) = 0.5 ;; Package = SO10-G1
UN2110 Marking = 6L ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.2 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = Mini3-G1
UN2121 Marking = 7A ;; VCEO(V) = -50 ;; IC(A) = -0.5 ;; PT(W) = 0.2 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = Mini3-G1
Same catergory

DCP020509P : ti DCP020509, Miniature, 2W ISOlated Unregulated DC/DC Converters. TO 89% EFFICIENCY THERMAL PROTECTION DEVICE-TO-DEVICE SYNCHRONIZATION SO-28 POWER DENSITY (6.5W/cm3) EN55022 CLASS B EMC PERFORMANCE UL1950 RECOGNIZED JEDEC 14-PIN AND SO-28 PACKAGES The DCP02 series is a family of 2W, unregulated, isolated DC/DC converters. Requiring a minimum of external components and including on-chip device protection, the DCP02.

ILC5061AM28 : Voltage Detector (2.8V). Power Supply reset Monitor with 1% Precision All-CMOS design or SC70 package 1% precision in Reset Detection Only 2mA of sink current capability Built-in hysteresis 5% of detection voltage Voltage options of and 4.6V fit most supervisory applications Open-Drain Reset Output All-CMOS Monitor circuits in either or SC70 package offer the best performance.

M5291 : DC-DC Converter.

MA2810 : Power Ics / Powerswitching Regulators (MA Series). Storage Temperature Operating Temperature Junction Temperature Peak Input Voltage Input Current Maximum Operating Frequency Maximum Power Dissipation Dielectric Strength Insulation Resistance Fold Back Control Voltage Fold Back Control Current +,-,Fig.1 is Measurement Circuit of Peak Input Voltage Vin and Collector Cutoff Current ICEX. Pulse Width 150s.

MAX4391 : CMOS, Micropower, Inverting Switching Regulator.

RBO08 : Specific Automotive Load Charge Dump Protection. Reversed Battery And Overvoltage Protection Circuit (RBO).

SC431L : Low-voltage Adjustable Shunt Regulator. The is a three terminal adjustable shunt regulator with thermal stability guaranteed over temperature. The output voltage can be adjusted to any value from 1.24V (V REF to 20V with two external resistors. The SC431L has a typical dynamic output impedance of 0.05. Active output circuitry provides a very sharp turn on characteristic, making the SC431L.

SMF05 : Data & I/O Protection. TVS Diode Array For Esd And Latch-up Protection / SC70-5L.

TA7815S : Three Terminal Positive Voltage Regulators.

TA8006SN : 5v Voltage Regulator With Watchdog Timer.

TC342AL/CL : High Noise Immunity Logic. High Noise Immunity Logic, Package : See_factory.

TPS72118DBVR : ti TPS72118, Cap Free, Low-Noise, Low Input Voltage, 150mA Low Dropout Regulator.

UTCTL1451 : = Dual Pulse Width Modulation Control Circuits ;; Package = SOP-16, DIP-16 ;;.

LM3410 : 525kHz/1.6MHz, Constant Current Boost And SEPIC LED Driver The LM3410 constant current LED driver is a monolithic, high frequency, PWM step-up DC/DC converter in 5-pin SOT23, 6-pin LLP, & 8-pin eMSOP packages. With a minimum of external components the LM3410 is easy to use. It can drive 2.5A typical peak currents with an internal 160m?? NMOS switch.

TPS54286 : 2A Non-Synchronous Buck Converter With Integrated High SIde MOSFET, 600 KHz TPS54283 and TPS54286 are dual output non-synchronous buck converters capable of supporting 2-A output applications that operate from a 4.5-V to 28-V input supply voltage, and require output voltages between 0.8 V and 90% of the input voltage. With internally-determined operating.

DRV8801 : Full Bridge Motor Driver Designed to control dc motors by using pulse width modulation (PWM), the DRV8800/DRV8801 is capable of peak output currents up to 2.8 A and operating voltages up to 36 V. The PHASE and ENABLE inputs provide dc motor speed and direction control by applying external pulse-width modulation (PWM) and control signals. Internal synchronous.

TPS7A4533 : Low-Noise Fast-Transient-Response 1.5-A LDO Regulator The TPS7A45xx devices are low-dropout (LDO) regulators optimized for fast transient response. The device can supply 1.5 A of output current with a dropout voltage of 300 mV. Operating quiescent current is 1 mA, dropping to less than 1 A in shutdown. Quiescent current is well controlled; it does.

OKX-T/10-W5P-C : OKY & OKX Additions: 5 Vin Versions Of OKX 10/16A SIP & OKY 10/16A SMT The latest additions to our Okami range of PoL DC/DC converters comprise 5Vin versions of both the 10A and 16A models within the OKX and OKY series, all available with negative or positive on/off control. The OKX2/OKY2 variants support the sequence/tracking feature. These modules.

CM2830HIM23 : 300mA CMOS LDO The CM2830/CM2830A family is a positive voltage linear regulator developed utilizing CMOS technology featured low quiescent current (30 ÂA typ.), low dropout voltage, and high output voltage accuracy. Built-in low on-resistance transistor provides low dropout voltage and large output current. A 2.2 ÂF or greater can be used as an output.

 
0-C     D-L     M-R     S-Z