Details, datasheet, quote on part number: UN10006
PartUN10006
CategoryPower Management => Protection and Isolation => Circuit Protector Elements
TitleCircuit Protector Elements
DescriptionRated Current(A) = 0.6 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 100 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C) = -55 to +125 ;; Package = M-A1
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload UN10006 datasheet
Cross ref.Similar parts: UNH1106
  

 

Features, Applications

Parameter Operating ambient temperature Storage temperature Symbol Topr Tstg Rating to +125 Unit C

Parameter Rated voltage Rated current Internal resistance Cutoff current Standard temperature rise 75 Min Typ Max Unit V

Package shall be overheated and dangerous for overcurrent. This device should be used only to the secondary circuit. Package will be damaged for added overpower. This device is not electrical fuse legally. Please draw a clear line between electrical fuse from this device.

Note) The part number in the parenthesis shows conventional part number.

Sharp cutoff characteristics and low voltage drop Flame retardant package and low heat generation. The package is molded with high dimensional accuracy.

Features

Request for your special attention and precautions in using the technical information and semiconductors described in this book

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this book and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this book is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this book. (4) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.


 

Related products with the same datasheet
UNH1106
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
UN10008 Rated Current(A) = 0.8 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 80 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN10010 Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 60 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN10015 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 38 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN10020 Rated Current(A) = 2.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 30 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN10027 Rated Current(A) = 2.7 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 22 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11004 Rated Current(A) = 0.4 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 180 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11006 Rated Current(A) = 0.6 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 95 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11008 Rated Current(A) = 0.8 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 73 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11010 Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 56 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11015 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 33 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11020 Rated Current(A) = 2.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 26 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11027 Rated Current(A) = 2.7 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 18 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN1110 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1
UN1121 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.5 ;; PT(W) = 0.6 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = M-A1
UN1210 Marking = ;; VCEO(V) = 50 ;; IC(A) = 0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1
UN1221 Marking = ;; VCEO(V) = 50 ;; IC(A) = 0.5 ;; PT(W) = 0.6 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = M-A1
UN1231 Marking = ;; VCEO(V) = 20 ;; IC(A) = 0.7 ;; PT(W) = 0.01 ;; R1(kW ) = 1 ;; R2(kW ) = 0.021 ;; Package = M-A1
UN206 VCEO(V) = 18 ;; IC(A) = 1 ;; PT(W) = 0.5 ;; Package = SO10-G1
UN2110 Marking = 6L ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.2 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = Mini3-G1
UN2121 Marking = 7A ;; VCEO(V) = -50 ;; IC(A) = -0.5 ;; PT(W) = 0.2 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = Mini3-G1
UN2154 Marking = ev ;; VCEO(V) = -30 ;; IC(A) = -0.1 ;; PT(W) = 0.2 ;; R1(kW ) = 10 ;; R2(kW ) = 47 ;; Package = Mini3-G1
Same catergory

AAT3236IGV-25-T1 : 300ma CMOS High Performance LDO. The is a MicroPowerTM Low Dropout Linear Regulator designed to deliver a continuous 300mA output load current and is capable of handling short duration current peaks to 500mA. With a very small footprint SOT23-5 package it is ideally suited for portable applications where low noise, high power supply ripple rejection, extended battery life and small.

AD404M161RBA-5 : Low Voltage Operation is More Suitable to be Used on Battery Backup, Portable Electronic.

AMS2930 : . Fixed and Adjustable Versions Available Output Current in excess of 150mA Very Low Quiescent Current Reverse Battery Protection Input-output Differential less than 0.6V Short Circuit protection Internal Thermal Overload Protection 60V Load Dump Protection -50V Reverse Transient Protection Mirror Image Insertion Protection APPLICATIONS Battery Powered.

FMGA28 : . to +125C operation 50 dB min. attenuation at 500 kHz differential mode 45 dB min. attenuation at 5MHz common mode Compliant MIL-STD-461C, CE03 Compatible with MIL-STD-704A through E EMI INPUT FILTER 28 VOLT INPUT SURFACE MOUNT Size (max.): x 0.250 inches x 6.35 mm) Shown with "Gull Wing" lead option, also available with straight leads. See Section.

LTC1710 : High Side Switches. LTC1710, Smbus Dual High Side Switch. LTC1710 SMBus Dual Monolithic High Side Switch The LTC1710 SMBus dual switch has two built-in 0.4/ 300mA switches that are controlled a 2-wire SMBus interface. With a low standby current 14A (3.3V), the LTC1710 operates over an input voltage range to 5.5V while maintaining the SMBus specified 0.6V VIL and 1.4V VIH input thresholds. Using the 2-wire.

MAX1538 : The MAX1538 Selector Provides Power-source Control For Dual-battery Systems. The Device Selects Between an ac Adapter And Dual Batteries Based on The Presence of The Three Power Sources And The State of Charge of Each Battery. The MAX1538 Includes Analog Comparators to Detect Ac/airline-adapter Presence And Determine Battery Undervoltage. Fast Analog.

P10SG-0505EM : Power/w = 2 ;; Input/vdc = 5/12/24 ;; Output/vdc = 3,6/5/7,2/9/12/15/18Regulated ;; ISOlation = 1000V ;; Package = DIP24M.

P14SG-0505ZH52 : Power/w = 3 ;; Input/vdc = 5/12/24 ;; Output/vdc = +/-3,6/5/9/12/15/18 Regulated ;; ISOlation = 5200V ;; Package = DIP24.

R1170Dxxxx : 800mA Ultra Low on Resistance LDO.

TPS3805H33 : . typical applications Adjustable/1.5 V Dual Voltage Detector Adjustable/3.3 V High 1.5% Threshold Voltage Accuracy Supply Current: 3 A Typical at VDD 3.3 V Push/Pull Reset Output (TPS3805) Open-Drain Reset Output (TPS3803) Temperature Range. to 85C Five-Pin SC70 Package or Microprocessors Wireless Communication Systems Portable/Battery-Powered Equipment.

TPS7101QD : ti TPS7101, Lowest Dropout (LDO) PMOS Adjustable Voltage Regulator. Available 5-V, 4.85-V, and 3.3-V Fixed-Output and Adjustable Versions Very Low-Dropout Voltage. Maximum mA (TPS7150) Very Low Quiescent Current Independent of Load. 285 A Typ Extremely Low Sleep-State Current 0.5 A Max 2% Tolerance Over Specified Conditions For Fixed-Output Versions Output Current Range 500 mA TSSOP Package Option Offers Reduced.

UC1841 : Programmable, Off-line, PWM Controller. All Control, Driving, Monitoring, and Protection Functions Included Low-current, Off-line Start Circuit Voltage Feed Forward or Current Mode Control Guaranteed Duty Cycle Clamp PWM Latch for Single Pulse per Period Pulse-by-Pulse Current Limiting Plus Shutdown for Over-Current Fault No Start-up or Shutdown Transients Slow Turn-on Both Initially and After.

MIC2808 : RF PA Power Management IC 2MHz, 600mA DC/DC W/DAC Input And Bypass Switch, Dual Low Noise 200mA/30mA LDO Regulators The MIC2808 integrates a high performance 600mA DC/DC step down regulator intended for powering a power amplifier (PA) in a mobile phone with dual low noise low dropout (LDO) regulators for the rest of the RF section. Optimized for low noise.

PT7M7812XDE : P Supervisor Circuits The PT7M7xxx family microprocessor (P) supervisory circuits are targeted to improve reliability and accuracy of power-supply circuitry in P systems. These devices reduce the complexity and number of components required to monitor power-supply and battery functions..

 
0-C     D-L     M-R     S-Z