Details, datasheet, quote on part number: UN11004
CategoryPower Management => Protection and Isolation => Circuit Protector Elements
TitleCircuit Protector Elements
DescriptionRated Current(A) = 0.4 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 180 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C) = -55 to +125 ;; Package = M-B1
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload UN11004 datasheet
Cross ref.Similar parts: UNH0104
Find where to buy


Features, Applications

Parameter Operating ambient temperature Storage temperature Symbol Topr Tstg Rating to +125 Unit C

Parameter Rated voltage Rated current Internal resistance Cutoff current Standard temperature rise 135 Min Typ Max Unit m C

Package shall be overheated and dangerous for overcurrent. This device should be used only to the secondary circuit. Package will be damaged for added overpower. This device is not electrical fuse legally. Please draw a clear line between electrical fuse from this device.

Note) The part number in the parenthesis shows conventional part number.

Sharp cutoff characteristics and low voltage drop Flame retardant package and low heat generation. The package is molded with high dimensional accuracy.


Request for your special attention and precautions in using the technical information and semiconductors described in this book

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this book and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this book is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this book. (4) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.


Related products with the same datasheet
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
UN11006 Rated Current(A) = 0.6 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 95 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11008 Rated Current(A) = 0.8 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 73 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11010 Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 56 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11015 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 33 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11020 Rated Current(A) = 2.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 26 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11027 Rated Current(A) = 2.7 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 18 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN1110 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1
UN1121 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.5 ;; PT(W) = 0.6 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = M-A1
UN1210 Marking = ;; VCEO(V) = 50 ;; IC(A) = 0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1
UN1221 Marking = ;; VCEO(V) = 50 ;; IC(A) = 0.5 ;; PT(W) = 0.6 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = M-A1
UN1231 Marking = ;; VCEO(V) = 20 ;; IC(A) = 0.7 ;; PT(W) = 0.01 ;; R1(kW ) = 1 ;; R2(kW ) = 0.021 ;; Package = M-A1
UN206 VCEO(V) = 18 ;; IC(A) = 1 ;; PT(W) = 0.5 ;; Package = SO10-G1
UN2110 Marking = 6L ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.2 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = Mini3-G1
UN2121 Marking = 7A ;; VCEO(V) = -50 ;; IC(A) = -0.5 ;; PT(W) = 0.2 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = Mini3-G1
UN2154 Marking = ev ;; VCEO(V) = -30 ;; IC(A) = -0.1 ;; PT(W) = 0.2 ;; R1(kW ) = 10 ;; R2(kW ) = 47 ;; Package = Mini3-G1
UN216 VCEO(V) = -10/10 ;; IC(A) = -3/3 ;; PT(W) = 0.5 ;; Package = SO14-G1
UN217 VCEO(V) = -10/10 ;; IC(A) = -1/1 ;; PT(W) = 0.5 ;; Package = SO10-G1
UN2210 Marking = 8L ;; VCEO(V) = 50 ;; IC(A) = 0.1 ;; PT(W) = 0.2 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = Mini3-G1
UN222 VCEO(V) = -10/10 ;; IC(A) = -3/3 ;; PT(W) = 0.5 ;; Package = SO14-G1
UN2221 Marking = 9A ;; VCEO(V) = 50 ;; IC(A) = 0.5 ;; PT(W) = 0.2 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = Mini3-G1
Same catergory

5962-8670401DA : Current Mode. ti UC1842, Current Mode PWM Controller. Optimized For Off-line And To DC Converters Low Start Up Current (<1mA) Automatic Feed Forward Compensation Pulse-by-pulse Current Limiting Enhanced Load Response Characteristics Under-voltage Lockout With Hysteresis Double Pulse Suppression High Current Totem Pole Output Internally Trimmed Bandgap Reference 500khz Operation Low RO Error Amp The UC1842/3/4/5.

FAN4041 : 0 to 5V. Precision Micropower Shunt Voltage Reference. Adjustable shunt reference Tolerances +0.5% (25C) Low output noise Low temperature coefficient to 100 ppm/C max Small packages Extended operating current range The FAN4041 adjustable precision shunt references are ideal for space- and cost-sensitive applications. They are available with output voltage tolerances of 0.5% and 1%. They also have excellent.

GS2T5-12 : 2 W DC-DC Converter. The a 2.4W DC-DC converter designed to provide an isolated 12V/200mA power source. The module operates from a 5V input source and continuous short-circuit protection. An input filter minimizes the reflected input current. ELECTRICAL CHARACTERISTICS (Tamb.= 25 C unless otherwise specified) Symbol Vi Iir Vo Vor Vo Io Vis Top Tstg Parameter Input Voltage.

IRPT2056A : Power Module For 3 HP Motor Drives. 180-240V AC input, Hz 3-phase rectifier bridge 3-phase, short circuit rated, ultrafast IGBT inverter HEXFRED ultrafast soft recovery-freewheeling diodes Brake IGBT and diode Low inductance (current sense) shunts in positive and negative DC rail NTC temperature sensor Pin-to-baseplate isolation 2500V rms Easy-to-mount two-screw package Case temperature.

LM129 : Precision Reference. The LM129 and LM329 family are precision multi-current temperature-compensated 6.9V zener references with dynamic impedances a factor to 100 less than discrete diodes. Constructed in a single silicon chip, the LM129 uses active circuitry to buffer the internal zener allowing the device to operate over 15 mA range with virtually no change in performance.

LT1460 : 2.5v Reference. Maximum Initial Tolerance: 0.2% Guaranteed Temperature Stability Maximum 0.6 Dynamic Impedance Wide Operating Current Range Directly Interchangeable with LM136 for Improved Performance No Adjustments Needed for Minimum Temperature Coefficient The is a precision trimmed 2.5V shunt regulator diode featuring a maximum initial tolerance of only 5mV. The low dynamic.

LTC3718 : LTC3718, Low Input Voltage DC/DC Controller For DDR Memory Termination.

MAX6312UK__D_-T : 5-pin, Multiple-input, Programmable Reset Ics. The MAX6305MAX6313 CMOS microprocessor (P) supervisory circuits are designed to monitor more than one power supply. Ideal for monitoring both 5V and 3.3V in personal computer systems, these devices assert a system reset if any of the monitored supplies falls outside the programmed threshold. Low supply current (15A) and a small package suit them.

MAX8873 : Low-dropout 120mA Linear Regulators. The MAX8873T/S/R and MAX8874T/S/R low-dropout linear regulators operate from to +6.5V input range and deliver 120mA. A PMOS pass transistor allows the low, 82A supply current to remain independent of load, making these devices ideal for battery-operated portable equipment such as cellular phones and cordless phones. The devices feature Dual ModeTM.

MIC2219 : MIC2219 Dynamically Adjustable Dual µCap LDO. The is a dual Cap low dropout regulator. The first regulator is capable of sourcing 150mA, while the second regulator can source to 300mA. Ideal for battery operated applications, the MIC2219 offers 1% accuracy, extremely low dropout voltage @ 100mA), and extremely low ground current, only 48A total. Equipped with TTL logic compatible enable pins,.

MT90820 : CMOS St-bus Family Large Digital Switch ( LDX ). CMOS ST-BUSTM FAMILY MT90820 Large Digital Switch (LDX) Advance Information 2,048 channel non-blocking switch Maintains frame integrity on concatenated channels. Per-channel selection of minimum or constant throughput delay Serial streams or 8.192Mb/s Frame offset delay measurement Programmable frame delay offset Per-channel three-state control Per-channel.

SC431L : Low-voltage Adjustable Shunt Regulator. The is a three terminal adjustable shunt regulator with thermal stability guaranteed over temperature. The output voltage can be adjusted to any value from 1.24V (V REF to 20V with two external resistors. The SC431L has a typical dynamic output impedance of 0.05. Active output circuitry provides a very sharp turn on characteristic, making the SC431L.

TPS70145PWP : ti TPS70145, Dual-output LDO Voltage Regulators. TPS70158, TPS70102 DUAL-OUTPUT LOW-DROPOUT VOLTAGE REGULATORS WITH POWER UP SEQUENCING FOR SPLIT VOLTAGE DSP SYSTEMS Applications Selectable Power Up Sequencing for DSP Applications (See Part Number TPS702xx for Independently Enabled Outputs) Output Current Range mA on Regulator 1 and mA on Regulator 2 Fast Transient Response Voltage Options Are 3.3-V/1.5-V,.

UC385-2 : . Fast Transient Response to 5-A Load Current Short Circuit Protection Maximum Dropout at 5-A Load Current Separate Bias (VB) and VIN Pins Available in Adjustable or Fixed Output Voltages 5-Pin Package Allows Kelvin Sensing of Load Voltage Reverse Current Protection The is a low dropout linear regulator providing a quick response to fast load changes.

AAT3123 : The AAT3123/23A/24 is a low noise, constant frequency charge pump DC/DC converter that uses a dual mode load switch (1X) and fractional (1.5X) conversion to maximize efficiency for white LED applications. The device can be used to produce current levels up to 20mA to drive up to six LEDs from a 2.7V to 5.5V input. Outputs may be operated individually.

0-C     D-L     M-R     S-Z