Details, datasheet, quote on part number: UN11010
CategoryPower Management => Protection and Isolation => Circuit Protector Elements
TitleCircuit Protector Elements
DescriptionRated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 56 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C) = -55 to +125 ;; Package = M-B1
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload UN11010 datasheet


Features, Applications

Parameter Operating ambient temperature Storage temperature Symbol Topr Tstg Rating to +125 Unit °C

Parameter Rated voltage Rated current Internal resistance Cutoff current Standard temperature rise 42 Min Typ Max Unit V

Package shall be overheated and dangerous for overcurrent. This device should be used only to the secondary circuit. Package will be damaged for added overpower. This device is not electrical fuse legally. Please draw a clear line between electrical fuse from this device.

Note) The part number in the parenthesis shows conventional part number.

Sharp cutoff characteristics and low voltage drop Flame retardant package and low heat generation. The package is molded with high dimensional accuracy.


Request for your special attention and precautions in using the technical information and semiconductors described in this book

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this book and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this book is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this book. (4) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.


Related products with the same datasheet
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
UN11015 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 33 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11020 Rated Current(A) = 2.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 26 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN11027 Rated Current(A) = 2.7 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 18 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UN1110 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1
UN1121 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.5 ;; PT(W) = 0.6 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = M-A1
UN1210 Marking = ;; VCEO(V) = 50 ;; IC(A) = 0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1
UN1221 Marking = ;; VCEO(V) = 50 ;; IC(A) = 0.5 ;; PT(W) = 0.6 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = M-A1
UN1231 Marking = ;; VCEO(V) = 20 ;; IC(A) = 0.7 ;; PT(W) = 0.01 ;; R1(kW ) = 1 ;; R2(kW ) = 0.021 ;; Package = M-A1
UN206 VCEO(V) = 18 ;; IC(A) = 1 ;; PT(W) = 0.5 ;; Package = SO10-G1
UN2110 Marking = 6L ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.2 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = Mini3-G1
UN2121 Marking = 7A ;; VCEO(V) = -50 ;; IC(A) = -0.5 ;; PT(W) = 0.2 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = Mini3-G1
UN2154 Marking = ev ;; VCEO(V) = -30 ;; IC(A) = -0.1 ;; PT(W) = 0.2 ;; R1(kW ) = 10 ;; R2(kW ) = 47 ;; Package = Mini3-G1
UN216 VCEO(V) = -10/10 ;; IC(A) = -3/3 ;; PT(W) = 0.5 ;; Package = SO14-G1
UN217 VCEO(V) = -10/10 ;; IC(A) = -1/1 ;; PT(W) = 0.5 ;; Package = SO10-G1
UN2210 Marking = 8L ;; VCEO(V) = 50 ;; IC(A) = 0.1 ;; PT(W) = 0.2 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = Mini3-G1
UN222 VCEO(V) = -10/10 ;; IC(A) = -3/3 ;; PT(W) = 0.5 ;; Package = SO14-G1
UN2221 Marking = 9A ;; VCEO(V) = 50 ;; IC(A) = 0.5 ;; PT(W) = 0.2 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = Mini3-G1
Same catergory

AMS1587 : 3a Low Dropout Voltage Regulator. Three Terminal Adjustable or Fixed Voltages 3.3V, 3.5V and 5.0V Output Current of 3A Operates Down to 1V Dropout Fast Transient response Line Regulation: TO-220, TO-263 and TO-252 packages available APPLICATIONS High Efficiency Linear Regulators Post Regulators for Switching Supplies Microprocessor Supply Battery Chargers Constant Current Regulators.

BQ26200 : . HIGHPERFORMANCE BATTERY MONITOR WITH COLOUMB COUNTER AND FLASH MEMORY Work With an Intelligent Host Controller ­ Provides State of Charge Information for Rechargeable Batteries ­ Enhances Charge Termination High Accuracy Coulometric Charge and Discharge Current Integration With Automatic Offset Compensation Differential Current Sense 32 Bytes of General-Purpose.

CS5151 : Cpu 4-bit Nonsynchronous Buck Controller. The a 4­bit nonsynchronous N­Channel buck controller. It is designed to provide unprecedented transient response for today's demanding high­density, high­speed logic. The regulator operates using a proprietary control method, which allows 100 ns response time to load transients. The CS5151 is designed to operate over 4.25­16 V range (VCC) using V to power.

KIA7033 : Bipolar Linear Integrated Circuit ( Voltage Detector ). Function of this IC is accurately resetting the system after detecting voltage at the time of switching power on and instantaneous power off in various CPU systems and other logic systems. Current Consumption is Low. ICCL=300 A Typ. ICCH=30 A Typ. Resetting Output Minimum Guarantee Voltage is Low 0.8V Typ. Hysteresis Voltage is Provided. 50mV Typ. Reset.

LDO53 : ip Library: High Psrr, Very Low Power, 40ma Low Dropout Voltage Regulator.

LTC1044 : Switched Capacitor Voltage Converter.

LX1552CD : Current Mode PWMs. Current Mode Pwms, Package : Soic. The LX155X family of ultra-low start-up current (250µA max.), current mode control IC's offer new levels of energy efficiency for offline converter applications. They are ideally optimized for personal computer and CRT power supplies although they can be used in any number of off-line applications where energy efficiency is critical. Coupled with the fact.

MAX5037EVKIT : MAX5037EVKIT Evaluation Kit For The MAX5037. The MAX5037 evaluation (EV) kit is a fully assembled and tested VRM power-supply evaluation kit. The EV kit module can be inserted directly into the VRM daughter board AMP connector (1364125-1 or equivalent) on Pentium® 4 processor motherboards. The input voltage range is either to 13.2V. The EV kit design is optimized for the best performance at 12V input.

MC78L05A : 3-Terminal 0.1A Postive Voltage Regulator. Maximum Output Current of 100mA Output Voltage 15V, 18V and 24V Thermal Overload Protection Short Circuit Current Limiting Output Voltage Offered in ±5% Tolerance The MC78LXXA/LM78LXXA/MC78L05AA series of fixed voltage monolithic integrated circuit voltage regulators are suitable for application that required supply current to 100mA. Parameter Input.

MC78M24 : 3-Terminal 0.5A Positive Voltage Regulator. Output Current to 0.5A Output Voltages of 24V Thermal Overload Protection Short Circuit Protection Output Transistor Safe Operating Area (SOA)Protection The MC78MXX/LM78MXX series of three-terminal positive regulators are available in the TO-220/D-PAK package with several fixed output voltages making it useful in a wide range of applications. Parameter.

NCP1402 : . The NCP1402 series are monolithic micropower step­up to DC converter that are specially designed for powering portable equipment from one or two cell battery packs.These devices are designed to start­up with a cell voltage 0.8 V and operate down to less than 0.3 V. With only three external components, this series allow a simple means to implement highly.

TPS62300 : 500-mA, 3-MHz Synchronous Step-down Converter in Chip Scale Packagingthe TPS62300 Provides High Power Conversion Efficiency to Preserve Battery Life And Simplify Thermal Design Considerations. The Device Offers The Industry S Highest DC Voltage Regulation Accuracy And Best-in-class Load Transient Response to Satisfy Demanding Processor Core Power Requirements..

UA7918CKC : ti UA7918, 18V, 1.5A Fixed Negative Voltage Regulator. 3-Terminal Regulators Output Current A No External Components Internal Thermal Overload Protection High-Power Dissipation Capability Internal Short-Circuit Current Limiting Output Transistor Safe-Area Compensation This series of fixed-negative-voltage INPUT integrated-circuit voltage regulators is designed COMMON to complement Series in a wide range.

UC27132D : MOSFET and Power Drivers. ti UC27132, High or Low Side Smart Power Switch.

UC2844AD : Current Mode. ti UC2844A, Current Mode PWM Controller. Optimized for Off-line and to DC Converters Low Start Up Current (<0.5mA) Trimmed Oscillator Discharge Current Automatic Feed Forward Compensation Pulse-by-Pulse Current Limiting Enhanced Load Response Characteristics Under-Voltage Lockout With Hysteresis Double Pulse Suppression Part # UVLO 16.0V 8.5V UVLO Off 10.0V 7.9V Maximum Duty Cycle The UC1842A/3A/4A/5A.

HT7L2103 : Anti-EMI, High Efficiency Dimmable LED Lighting Driver With Primary-Side Constant Control And Green Mode The HT7L2103 is an advanced, highly integrated LED Lighting Driver using an AC-DC isolation topology. The device provides many protection functions and uses ultra low power circuit design, and is optimized to restrict EMI. By integrating a special.

0-C     D-L     M-R     S-Z