|Category||Discrete => Transistors => Bipolar => Bipolar Array => Small Signal Transistor Arrays|
|Title||Small Signal Transistor Arrays|
|Description||V<SUB>CEO</SUB>(V) = -10/10 ;; I<SUB>C</SUB>(A) = -1.5/1.5 ;; P<SUB>T</SUB>(W) = 0.5 ;; Package = SO16-G1|
|Company||Panasonic Industrial Company/Electronic Components|
|Datasheet||Download UN227 datasheet
Transistor array to drive the small motor s Features
Small and lightweight Low power consumption Low-voltage drive With 8 elements incorporated
For motor drives Small motor drive circuits in general
Parameter Symbol VCBO VCEO VEBO IC ICP PT* Tj Tstg Ratings to +150 Unit °C
Collector to base voltage Collector to emitter voltage Emitter to base voltage Collector current Peak collector current Total power dissipation Junction temperature Storage temperatureNote: ± marks used above: NPN part, PNP part = 25°C only when the elements are active
Note.) The Part number in the Parenthesis shows conventional part number.
Symbol VCBO VCEO VEBO ICBO ICEO hFE VCE(sat) fT Cob VF Conditions (NPN) = 0 (PNP) = 0 (NPN) = 0 (PNP) = 0 (NPN) = 0 (PNP) = 0 (NPN) VCB = 0 (PNP) VCB = 0 (NPN) VCE = 0 (PNP) VCE = 0 (NPN) VCE = 400mA* (PNP) VCE = 400mA* (NPN) = 25mA* (PNP) = 25mA* (NPN) VCB = 200MHz (PNP) VCB = 200MHz (NPN) VCB = 1MHz (NPN) VCB = 1MHz (NPN) = 0.5A (PNP) 0.5A min V typ max Unit V
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
|Related products with the same datasheet|
|Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components|
|UN228 VCEO(V) = -10/10 ;; IC(A) = -1/1 ;; PT(W) = 0.5 ;; Package = SO10-G1|
|UN230 VCEO(V) = -10/10 ;; IC(A) = -3/3 ;; PT(W) = 0.5 ;; Package = SO10-G1|
|UN4110 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.3 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = NS-A1NS-B1|
|UN4121 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.5 ;; PT(W) = 0.3 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = NS-A1NS-B1|
|UN4210 Marking = ;; VCEO(V) = 50 ;; IC(A) = 0.1 ;; PT(W) = 0.3 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = NS-A1NS-B1|
|UN4221 Marking = ;; VCEO(V) = 50 ;; IC(A) = 0.5 ;; PT(W) = 0.3 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = NS-A1NS-B1|
|UN5110 Marking = 6L ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.15 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = SMini3-G1|
|UN5154 Marking = ev ;; VCEO(V) = -30 ;; IC(A) = -0.1 ;; PT(W) = 0.15 ;; R1(kW ) = 10 ;; R2(kW ) = 0.213 ;; Package = SMini3-G1|
|UN5210 Marking = 8L ;; VCEO(V) = 50 ;; IC(A) = 0.1 ;; PT(W) = 0.15 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = SMini3-G1|
|UN6110 Silicon PNP Epitaxial Planer Transistor|
AN77L03 : 3-Pin Low Dropout Regulator VI(V) = vo +0.3 to 13.62 ;; PD(W) = 0.65 ;; VO(V) = 3 ;; IO(Peak)(A) = ;; VDIF(V) = 0.12 ;; Package =
LN1471Y : Ln1261cal
EEE-FPE561UAP : 560µF Aluminum Capacitor Radial, Can - SMD 25V; CAP ALUM 560UF 25V 20% SMD Specifications: Capacitance: 560µF ; ESR (Equivalent Series Resistance): 80.0 mOhm ; Features: High Temperature Reflow ; Lifetime @ Temp.: 2000 Hrs @ 105°C ; Size / Dimension: 0.394" Dia (10.00mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.406" L x 0.406" W (10.30mm x 10.30mm) ; Mounting Type: S
ELL-5GM470M : Fixed Inductors, Coils, Choke 47µH 390mA 0.204" L x 0.204" W x 0.059" H (5.20mm x 5.20mm x 1.50mm) -; CHOKE COIL 47UH 390MA SMD Specifications: Inductance: 47µH ; Tolerance: ±20% ; Package / Case: 0.204" L x 0.204" W x 0.059" H (5.20mm x 5.20mm x 1.50mm) ; Packaging: Cut Tape (CT) ; Type: - ; Current: 390mA ; Mounting Type: Surface Mount ; Q @ Freq: - ; Frequency - Self Resonant: - ; DC Resistance (DCR): 930 mOhm ; Shielding
ELC-18B121L : Fixed Inductors, Coils, Choke 120µH 3A Radial -; COIL CHOKE 120UH RADIAL Specifications: Inductance: 120µH ; Tolerance: ±10% ; Package / Case: Radial ; Packaging: Bulk ; Type: - ; Current: 3A ; Mounting Type: Through Hole ; Q @ Freq: - ; Frequency - Self Resonant: - ; DC Resistance (DCR): 65 mOhm ; Shielding: Unshielded ; Applications: General Purpose ; Lead Free Status:
ERJ-1TNF1301U : 1.3K Ohm 1W Chip Resistor - Surface Mount; RES 1.30K OHM 1W 1% 2512 SMD Specifications: Resistance (Ohms): 1.3K ; Power (Watts): 1W ; Tolerance: ±1% ; Packaging: Digi-Reel® ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ERJ-8GEYJ114V : 110K Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 110K OHM 1/4W 5% 1206 SMD Specifications: Resistance (Ohms): 110K ; Power (Watts): 0.25W, 1/4W ; Tolerance: ±5% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: ±200ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ERJ-S1DJ184U : 180K Ohm 0.75W, 3/4W Chip Resistor - Surface Mount; RES ANTI-SULFUR 180K OHM 5% 2010 Specifications: Resistance (Ohms): 180K ; Power (Watts): 0.75W, 3/4W ; Tolerance: ±5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ERJ-3EKF3301V : 3.3K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 3.30K OHM 1/10W 1% 0603 SMD Specifications: Resistance (Ohms): 3.3K ; Power (Watts): 0.1W, 1/10W ; Tolerance: ±1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ERJ-XGEJ472Y : 4.7K Ohm 0.03W, 1/32W Chip Resistor - Surface Mount; RESISTOR 4.7K OHM 1/32W 5% 01005 Specifications: Resistance (Ohms): 4.7K ; Power (Watts): 0.03W, 1/32W ; Tolerance: ±5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±200ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ELLATP2R7NB : IND,NON-SPECIFIED,2.7UH,30% +TOL,30% -TOL,3939 CASE Specifications: Application: General Purpose
ERB-RG3R00V : Surface Mount Fuses 3 AMP32V FAST ACTING Panasonic ERBRD, ERBRE, ERBRG Series Micro Chip Fuses are fast acting fuses that withstand in-rush current characteristics. All three series are RoHS compliant and feature a -40ºC to +125ºC category temperature range. These Micro Chip Fuses meet UL248-14 and c-UL C22.2 safety standards.
2SA1330 : High Voltage Amplifier And Switching PNP Silicon Epitaxial Transistor Mini Mold.
2SB1048 : Darlington connected TRSs. Small Signal Switching Darlington Transistor.
81CNQ : 5 to 100 Amp. Schottky Rectifier 80 Amp. I F(AV) Rectangular waveform VRRM range I FSM 5 µs sine @ 40 Apk, = 125°C (per leg) range A V A The 81CNQ center tap Schottky rectifier module series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation 175 °C junction temperature. Typical applications are in switching power.
AT-42010 : Power. General Purpose Transistor. to 6 GHz Medium Power Silicon Bipolar Transistor Technical Data High Output Power: 12.0 dBm Typical at 2.0 GHz 20.5 dBm Typical at 4.0 GHz High Gain 1 dB Compression: 14.0 dB Typical at 2.0 GHz 9.5 dB Typical at 4.0 GHz Low Noise Figure: 1.9 dB Typical NFO at 2.0 GHz High Gain-Bandwidth Product: 8.0 GHz Typical fT Hermetic Gold-ceramic Microstrip Package.
BDS20 : Screening Options Available = ;; Polarity = NPN ;; Package = TO257AB (TO220M) ;; Vceo = 80V ;; IC(cont) = 5A ;; HFE(min) = 1000 ;; HFE(max) = - ;; @ Vce/ic = 3V / 500mA ;; FT = 8MHz ;; PD = 50W.
SCDAS4 : Standard Recovery Doubler And Center Taps.
STA414A : NPN General Purpose. Symbol VCBO VCEO VEBO IC ICP PT Tj Tstg Ratings to +150 Symbol ICBO IEBO VCER hFE VCE(sat) VBE(sat) V min typ max 10 Unit With Infinite Heatsink With Silicone Grease Natural Cooling Heatsink: Aluminum in mm .
UES1101 : Ultra Fast Rectifier (less Than 100ns), Package : a.
0805A0160151KXT : CAPACITOR, CERAMIC, MULTILAYER, 16 V, X7R, 0.00015 uF, SURFACE MOUNT, 0805. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Applications: General Purpose ; Electrostatic Capacitors: Ceramic Composition ; Capacitance Range: 1.50E-4 microF ; Capacitance Tolerance: 10 (+/- %) ; WVDC: 16 volts ; Mounting Style: Surface Mount Technology.
ARA009-0212-00S : DATACOM TRANSFORMER FOR 10/100 BASE-T; ETHERNET APPLICATION(S). s: Category: Signal ; Other Transformer Types / Applications: Pulse Transformers, DATACOM TRANSFORMER ; Mounting: Chip Transformer ; Operating Temperature: 0 to 70 C (32 to 158 F).
ASI10498 : VHF BAND, Si, NPN, RF POWER TRANSISTOR. s: Polarity: NPN ; Operating Frequency: 750 MHz.
C1206C102J5GAC7800 : CAP,CERAMIC,1NF,50VDC,5% -TOL,5% +TOL,C0G TC CODE,-30,30PPM TC,1206 CASE. s: Dielectric: Ceramic Composition ; RoHS Compliant: Yes.
CZT3150BK : 5 A, 25 V, NPN, Si, POWER TRANSISTOR. s: Polarity: NPN ; Package Type: PLASTIC PACKAGE-4.
F1710-210-1000 : CAPACITOR, METALLIZED FILM, POLYESTER, 0.001 uF, THROUGH HOLE MOUNT. s: Configuration / Form Factor: Leaded Capacitor ; Technology: Film Capacitors ; Applications: General Purpose ; Electrostatic Capacitors: Polyester ; Capacitance Range: 1.00E-3 microF ; Capacitance Tolerance: 20 (+/- %) ; Mounting Style: Through Hole.
SG731JRTTD100K : RESISTOR, METAL GLAZE/THICK FILM, 0.1 W, 10 %, 200 ppm, 10 ohm, SURFACE MOUNT, 0603. s: Category / Application: General Use ; Technology / Construction: Thick Film (Chip) ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), 0603, CHIP, ROHS COMPLIANT ; Resistance Range: 10 ohms ; Tolerance: 10 +/- % ; Temperature Coefficient: 200 Â±ppm/Â°C.
2N656573 : 0.8 A, 400 V, SCR, TO-92. s: VDRM: 400 volts ; VRRM: 400 volts ; IT(RMS): 0.8000 amps ; IGT: 0.2000 mA ; Standards and Certifications: RoHS ; Package Type: TO-92, TO-92, 3 PIN ; Pin Count: 3.