Details, datasheet, quote on part number: UNA0230UN230
PartUNA0230UN230
CategoryPower Management => Transistor Arrays
TitleTransistor Arrays
Description
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload UNA0230UN230 datasheet
  

 

Features, Applications

Transistor array to drive the small motor s Features
Small and lightweight Low power consumption Low-voltage drive With 4 elements incorporated
For motor drives Small motor drive circuits in general

Parameter Collector to base voltage Collector to emitter voltage Collector current Peak collector current Total power dissipation Junction temperature Storage temperature Symbol VCBO VCEO IC ICP PT* Tj Tstg

Note: marks used above: NPN part, PNP part = 25C only when the elements are active
Note.) The Part number in the Parenthesis shows conventional part number.

Symbol VCBO VCEO ICBO hFE VCE(sat) fT Cob VF REB Conditions (NPN) = 0 (PNP) = 0 (NPN) = 0 (PNP) = 0 (NPN) VCB = 0 (PNP) VCB = 0 (NPN) VCE = 0.5A* (PNP) VCE 0.5A* (NPN) = 50mA* (PNP) = 50mA* (NPN) VCB = 200MHz (PNP) VCB = 200MHz (NPN) VCB = 1MHz (PNP) VCB = 1MHz (NPN) = 1A (PNP) = 1A min V typ max Unit V

Forward voltage (DC) Bias resistance *Pulse measurement




 

Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
UNA0232 VCEO(V) = 10 ;; IC(A) = 1 ;; PT(W) = 0.5 ;; Package = SO10-G1
UNA0233 VCEO(V) = -10/10 ;; IC(A) = -0.5/0.5 ;; PT(W) = 0.5 ;; Package = SO14-G1
UNA0234 VCEO(V) = -10/10 ;; IC(A) = -1.5/1.5 ;; PT(W) = 0.5 ;; Package = SO16-G1
UNA0235 VCEO(V) = -10/10 ;; IC(A) = -3/3 ;; PT(W) = 0.5 ;; Package = SO14-G1
UNA0236 VCEO(V) = -10/10 ;; IC(A) = -1/1 ;; PT(W) = 0.5 ;; Package = SO10-G1
UNH0003 Rated Current(A) = 0.6 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 83 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0006 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 39 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0008 Rated Current(A) = 0.8 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 71 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0009 Rated Current(A) = 2.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 28 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0011 Rated Current(A) = 2.7 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 19.5 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0012 Rated Current(A) = 0.25 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 350 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0013 Rated Current(A) = 0.4 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 195 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0104
UNH0106 Rated Current(A) = 0.6 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 95 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0108 Rated Current(A) = 0.8 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 73 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0110 Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 56 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0115 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 33 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0120 Rated Current(A) = 2.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 26 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0127 Rated Current(A) = 2.7 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 18 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1104 Rated Current(A) = 0.4 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 190 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1106 Rated Current(A) = 0.6 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 100 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
Same catergory

COMBI/E1-I : ISDN Power Management->Modules. Isdn NT1 Power Management Module. Uko INTERFACE (DC) and MAINS (AC) inputs to enable NPM (Normal Power Mode) and RPM (Restricted Power Mode) CONDITIONS INPUT FILTER TO MEET EMI requirements PEAK INPUT OVERVOLTAGE WITHSTANDING ORDERING NUMBER: GS-COMBI/E1-I AC INPUT PROTECTION FUSE INPUTS TO OUTPUTS INSULATION 2 INSULATED OUTPUTS: Vo1=5 V for NT1 logics Vo2=40 V for "S" interface AUXILIARY.

KA79L05A : 3-Terminal 0.1A Negative Voltage Regulator. Output Current 100mA No External Components Internal Thermal Over Load Protection Internal Short Circuit Current Limiting Output Voltage Offered in 5% Tolerance Output Voltage -15V, -18V and -24V These regulators employ internal current limiting and thermal shutdown, making them essentially indestructible. Parameter Input Voltage (for Vo= to -8V) (for.

LM2698 : LM2698 - Simple SWITCHER® 1.35A Boost Regulator, Package: Evaluation Board, Pin Nb=-.

MC79L12BP : Voltage Regulator, Package Type : TO-92, Ipp : .1, VDRM : 100. Internal Short Circuit Current Limiting Internal Thermal Overload Protection No External Components Required Parameter Input Voltage Operating Junction Temperature Storage Temperature Range Symbol V1 TOPR TSTG Output Voltage Load Regulation Line regulation Quiescent Current Output Noise Voltage Ripple Rejection *Note: Bypass Capacitors are recommended.

PEN3-1205E21 : Power/w = 2 - 3 ;; Input/vdc = 9-18/18-36/36-72 ;; Output/vdc = 5/12/15 ;; ISOlation = 1500V ;; Package = DIP24.

PT4110 : . 15W Output Power (1) Input Voltage Range: 75V 1500 VDC Isolation Low-Profile Current Limit Short-Circuit Protection Over-Temperature Shutdown UL1950 recognized CSA 22.2 950 certified Meets EN60950 The PT4100--48V series of dc/dc converters provide Watts/in3 of isolated power in a single low-profile module. Designed to operate from a standard 48V telecom.

SS26ABA : SS26 (SuperSIP) DC/DC Converter.

SW-224PIN : GAAS SPDT Switch Dc-2 GHZ. Low Insertion Loss, 0.5 dB Typical Integral TTL Driver Low DC Power Consumption Bottom of Case is AC Ground. Dimensions ( ) are in mm. Unless Otherwise Noted:.xxx 0.010 (.xx 0.02 (.x 0.5) WEIGHT (APPROX.): 0.025 OUNCES 0.7 GRAMS Impedance 50 Ohms Nominal Switching Characteristics Trise, Tfall 10 ns Typ Ton, Toff (50% CTL to 90/10% RF) 150 ns Typ Transients.

UC2845AD : Current Mode. ti UC2845A, Current Mode PWM Controller. Optimized for Off-line and to DC Converters Low Start Up Current (<0.5mA) Trimmed Oscillator Discharge Current Automatic Feed Forward Compensation Pulse-by-Pulse Current Limiting Enhanced Load Response Characteristics Under-Voltage Lockout With Hysteresis Double Pulse Suppression Part # UVLO 16.0V 8.5V UVLO Off 10.0V 7.9V Maximum Duty Cycle The UC1842A/3A/4A/5A.

UC3635DW : Motion/Motor Control. ti UC3635, Phase Locked Frequency Controller. Precision Phase Locked Frequency Control System Crystal Oscillator Programmable Reference Frequency Dividers The UC1635 family of integrated circuits was designed for use in precision speed control of DC motors. An extension to the UC1633 line of phase locked controllers, these devices provide access to both of the digital phase detector's inputs, and include.

UC3844A : Current Mode PWM Controllers. Current Mode PWM Controller. Optimized for Off-line and to DC Converters Low Start Up Current (<0.5mA) Trimmed Oscillator Discharge Current Automatic Feed Forward Compensation Pulse-by-Pulse Current Limiting Enhanced Load Response Characteristics Under-Voltage Lockout With Hysteresis Double Pulse Suppression Part # UVLO 16.0V 8.5V UVLO Off 10.0V 7.9V Maximum Duty Cycle The UC1842A/3A/4A/5A.

X3100 : 3 or 4 Cell Li-ion Battery Protection And Monitor ic. FEATURE Software Selectable Protection Levels and Variable Protect Detection/Release Times Integrated FET Drive Circuitry Cell Voltage and Current Monitoring 0.5% Accurate Voltage Regulator Integrated 4kbit EEPROM Flexible Power Management with 1A Sleep Mode Cell Balancing Control BENEFIT Optimize protection for chosen cells to allow maximum use of pack.

ISL6255 : Highly Integrated Battery Charger with Automatic Power Source Selector for Notebook Computers The ISL6255, ISL6255A is a highly integrated battery charger controller for Li-Ion/Li-Ion polymer batteries. High Efficiency is achieved by a synchronous buck topology and the use of a MOSFET, instead of a diode, for selecting power from the adapter or battery.

MAX8630W : Triple-Channel Video Reconstruction Filter and Buffer for Composite and Y/C Outputs Cost Effective S-Video Filtering and Buffering with Composite Video Summer The MAX7453 is a low-cost, triple-channel video reconstruction filter for S-video and CVBS video-signal applications. This device is ideal for anti-aliasing and DAC smoothing video applications.

ISL21007BFB812 : Precision, Low Noise FGA Voltage References The ISL21007 FGA voltage references are extremely low power, high precision, and low noise voltage references fabricated on Intersils proprietary Floating Gate Analog technology. The ISL21007 very low noise (4μVP-P for 0.1Hz to 10Hz) and very low operating current (150μA, Max). In addition, the ISL21007.

MCP1602 : 2.0 MHz, 500 MA Synchronous Buck Regulator W/Power-Good The MCP1602 is a high efficiency fully integrated 500 mA 2.0 MHz synchronous buck regulator ideally suited for Li-Ion/NiMH Battery powered application powered.

ADP2503 : 600 MA/1000 MA, 2.5 MHz Buck-Boost DC-to-DC Converter The ADP2503/ADP2504 are high efficiency, low quiescent current step-up/step-down dc-to-dc converters that can operate at input voltages above, below, or equal to the regulated output voltage. The power switches and synchronous rectifiers are internal to minimize external part count and maximize efficiency.

MAX16055 : Ultra-Small, Hex Voltage, Microprocessor Supervisor The MAX16055 precision hex voltage microprocessor (P) supervisory circuit monitors up to six system-supply voltages and asserts a single reset when any one supply voltage drops below its preset threshold. The device significantly reduces system size and component count while improving reliability.

LM2833 : 1.5MHz/3MHz 3.0A Step-Down DC-DC Switching Regulator The LM2833 regulator is a monolithic, high frequency, PWM step-down DC/DC converter available in a 10-pin LLP or eMSOP package. It contains all the active functions to provide local DC/DC conversion with fast transient response and accurate regulation in the smallest possible PCB area. With a minimum.

CM2830AVIN92 : 300mA CMOS LDO The CM2830/CM2830A family is a positive voltage linear regulator developed utilizing CMOS technology featured low quiescent current (30 ÂA typ.), low dropout voltage, and high output voltage accuracy. Built-in low on-resistance transistor provides low dropout voltage and large output current. A 2.2 ÂF or greater can be used as an output.

 
0-C     D-L     M-R     S-Z