Details, datasheet, quote on part number: UNH0008
PartUNH0008
CategoryPower Management => Protection and Isolation => Circuit Protector Elements
TitleCircuit Protector Elements
DescriptionRated Current(A) = 0.8 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 71 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C) = -55 to +125 ;; Package = TO-92-C1
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload UNH0008 datasheet
  

 

Features, Applications

Sharp cutoff characteristics and low voltage drop Flame retardant package and low heat generation, high density mounting is possible. The package is molded with high dimensional accuracy.

Parameter Operating ambient temperature Storage temperature Symbol Topr Tstg Rating to +125 Unit C

Parameter Rated voltage Rated current Internal Resistance Cutoff current * Standard temperature rise 53 Min Typ Max Unit C

Note) Measurement condition of cutoff current shall = 1s Tolerance of cutoff current shall 25%

Package shall be overheated and dangerous for overcurrent. This device should be used only to the secondary circuit. Package will be damaged for added overpower. This device is not electrical fuse legally. Please draw a clear line between electrical fuse from this device.

Request for your special attention and precautions in using the technical information and semiconductors described in this book

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this book and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this book is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this book. (4) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.


 

Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
UNH0009 Rated Current(A) = 2.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 28 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0011 Rated Current(A) = 2.7 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 19.5 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0012 Rated Current(A) = 0.25 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 350 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0013 Rated Current(A) = 0.4 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 195 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0104
UNH0106 Rated Current(A) = 0.6 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 95 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0108 Rated Current(A) = 0.8 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 73 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0110 Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 56 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0115 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 33 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0120 Rated Current(A) = 2.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 26 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0127 Rated Current(A) = 2.7 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 18 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1104 Rated Current(A) = 0.4 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 190 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1106 Rated Current(A) = 0.6 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 100 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1108 Rated Current(A) = 0.8 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 80 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1110 Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 60 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1115 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 38 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1120 Rated Current(A) = 2.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 30 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1127 Rated Current(A) = 2.7 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 22 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNHS200 Rated Current(A) = 0.5 ;; Shut-off Current(typ.) ± 20%(A) = 1.0 ;; Internal Resistance(typ.)(mw ) = 130 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage
UNHS201 Rated Current(A) = 0.7 ;; Shut-off Current(typ.) ± 20%(A) = 1.4 ;; Internal Resistance(typ.)(mw ) = 95 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage
UNHS202 Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = 2.0 ;; Internal Resistance(typ.)(mw ) = 58 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage
Same catergory

A2919SLB : PWM Specific. Dual Full-bridge PWM Motor Driver. The A2919SB and A2919SLB motor drivers are designed to drive both windings of a bipolar stepper motor or bidirectionally control two dc motors. Both bridges are capable of sustaining 45 V and include internal pulse-width modulation (PWM) control of the output current to 750 mA. The outputs have been optimized for a low output-saturation voltage drop.

BQ2110 : Integrated Module. Nicd/nimh Gas Gauge With 1-wire (dq) Interface And 5 Led Drivers.

HIP6004ACB : Buck And Synchronous-rectifier ( PWM ) Controller And Output Voltage Monitor.

IL431C : Adjustable Precision Regulator   TO-92. Programmable Output Voltage to 40V Low Dynamic Output Impedance 0.2 Sink Current Capability to 100 mA Equivalent Full-Range Temperature Coefficient 50 o ppm/ C Temperature Compensated for Operation over Full Rated Operating Temperature Range Low Output Noise Voltage Fast Turn on Respons TO-92, SOP- or SOT-23 packages The is a three-terminal adjustable.

LNBP10Series : LNB Supply And Control Voltage Regulator (parallel Interface). LNBP SUPPLY AND CONTROL VOLTAGE REGULATOR (PARALLEL INTERFACE) COMPLETE INTERFACE FOR TWO LNBs REMOTE SUPPLY AND CONTROL LNB SELECTION AND STAND-BY FUNCTION BUILT-IN TONE OSCILLATOR FACTORY TRIMMED AT 22KHz FAST OSCILLATOR START-UP FACILITATES DiSEqCTM ENCODING TWO SUPPLY INPUTS FOR LOWEST DISSIPATION BYPASS FUNCTION FOR SLAVE OPERATION LNB SHORT CIRCUIT.

LT1110 : Micropower DC-DC Converter Adjustable And Fixed 5V, 12V. Operates at Supply Voltages From to 30V Works in Step-Up or Step-Down Mode Only Three External Off-the-Shelf Components Required Low-Battery Detector Comparator On-Chip User-Adjustable Current Limit Internal 1A Power Switch Fixed or Adjustable Output Voltage Versions Space-Saving 8-Pin MiniDIP or S8 Package The is a versatile micropower DC-DC converter.

LT1640AH : LT1640AH, -9V to -80V, SO-8, Active High Power Good. Allows Safe Board Insertion and Removal from a Live 48V Backplane Operates from 80V Programmable Inrush Current Allows 50mA of Reverse Drain Pin Current Programmable Electronic Circuit Breaker Programmable Overvoltage Protection Programmable Undervoltage Lockout Power Good Control Output Central Office Switching 48V Distributed Power Systems Negative.

PT4106 : . Input Voltage Range: 40V 1500 VDC Isolation Low Profile Current Limit Short-Circuit Protection Over-Temperature Shutdown UL1950 recognized CSA 22.2 950 certified Meets EN60950 The PT4100--24V series of dc/dc converters provide Watts/in3 of isolated power in a single low-profile module. Designed to operate from a standard 24V telecom bus, these modules.

PT6101 : Non-Isolated DC-DC Converters. 1 Amp Adjustable Positive Step-down Integrated Switching Regulator 90% Efficiency Adjustable Output Voltage Internal Short Circuit Protection Over-T emperature Protection On/Off Control (Ground Off) Small SIP Footprint Meets Requirements for FCC Part 15; Class B limits for Radiated Emissions Wide Input Range The PT6100 Series is a line of High-Performance.

RC210 : Single Phase 2.0 Amps. Silicon Bridge Rectifiers.

SW-444SMB : 2v Control Triple-band Gsm/dcs/pcs Sp5t Switch 0.5 . 2.0 GHZ. ADVANCED INFORMATION 2V Control Triple-Band GSM/DCS/PCS SP5T Switch 2.0 GHz GSM Power Handling with +2.0V Control Voltage Low Power Consumption. Less than in Rx mode Integrated Decoder Leadless 4 mm FQFP-N, 20 Pin Package Low Insertion Loss dB in GSM Transmit Mode Functional Schematic The M/A-COM is a GaAs monolithic switch in a low cost, FQFP-N,.

UA7905 : 5V, 1.5A Fixed Negative Voltage Regulator. 3-Terminal Regulators Output Current A No External Components Internal Thermal Overload Protection High-Power Dissipation Capability Internal Short-Circuit Current Limiting Output Transistor Safe-Area Compensation This series of fixed-negative-voltage INPUT integrated-circuit voltage regulators is designed COMMON to complement Series in a wide range.

ISL9214A : Li-ion/Li-Polymer Battery Charger Accepting Two Power Sources The ISL9214A is a fully integrated low-cost single-cell Li-ion or Li-polymer battery charger. The charger accepts two power inputs, normally one from a USB (Universal Serial Bus) port and the other from a desktop cradle. The ISL9214A is an ideal charger for smart handheld devices that need.

ISL94200 : Multi-Cell Li-ion Battery Pack OCP/Analog Front-End The ISL94200 is an overcurrent protection device and analog front end for a microcontroller in a multi-cell Li-ion battery pack. The ISL94200 supports battery pack configurations consisting of 4-cells to 7-cells in series and 1 or more cells in parallel. The ISL94200 provides integral overcurrent protection.

TPS62561 : 2.25MHz 600mA Step-Down Converter In TSOT23 Package The TPS6256x devices are efficient synchronous step-down dc-dc converters optimized for battery-powered applications. They provide up to 600-mA output current from a single Li-Ion cell and are ideal to power mobile phones and other portable applications. With a wide input voltage range of 2.5 V to 5.5 V, the devices.

TPS22904 : Ultra-Small Low-Input-Voltage Low RON Load Switch With Quick Output Discharge The TPS22903 and TPS22904 are ultra-small, low rON single channel load switches with controlled turn on. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.1 V to 3.6 V. The switch is controlled by an on/off input (ON), which is capable.

AP2141D : Power Switches USB Switches Single Channel Single USB port power switches with output discharge Over-current and thermal protection 0.8A accurate current limiting Fast transient response Reverse Current Blocking 90m? on-resistance Input voltage range: 2.7V 5.5V 0.6ms typical rise time Very low shutdown current: 1?A (max) Fault.

NCV47711 : 5 V To 20 V Adjustable LDO With Adjustable Current Limit And 3.3 V Logic Compatible Enable Input The NCV47711 is a 350 mA output current integrated low dropout regulator designed for use in harsh automotive environments. It includes wide operating temperature and input voltage ranges. The device is offered with adjustable voltage versions available.

 
0-C     D-L     M-R     S-Z