Details, datasheet, quote on part number: UNH0013
PartUNH0013
CategoryPower Management => Protection and Isolation => Circuit Protector Elements
TitleCircuit Protector Elements
DescriptionRated Current(A) = 0.4 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 195 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C) = -55 to +125 ;; Package = TO-92-C1
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload UNH0013 datasheet
  

 

Features, Applications

Sharp cutoff characteristics and low voltage drop Flame retardant package and low heat generation, high density mounting is possible. The package is molded with high dimensional accuracy.

Parameter Operating ambient temperature Storage temperature Symbol Topr Tstg Rating to +125 Unit °C

Parameter Rated voltage Rated current Internal Resistance Cutoff current * Standard temperature rise 146 Min Typ Max Unit °C

Note) Measurement condition of cutoff current shall = 1s Tolerance of cutoff current shall ± 25%

Package shall be overheated and dangerous for overcurrent. This device should be used only to the secondary circuit. Package will be damaged for added overpower. This device is not electrical fuse legally. Please draw a clear line between electrical fuse from this device.

Request for your special attention and precautions in using the technical information and semiconductors described in this book

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this book and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this book is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this book. (4) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.


 

Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
UNH0104 Rated Current(A) = 0.4 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 180 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0106 Rated Current(A) = 0.6 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 95 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0108 Rated Current(A) = 0.8 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 73 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0110 Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 56 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0115 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 33 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0120 Rated Current(A) = 2.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 26 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH0127 Rated Current(A) = 2.7 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 18 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1104 Rated Current(A) = 0.4 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 190 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1106 Rated Current(A) = 0.6 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 100 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1108 Rated Current(A) = 0.8 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 80 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1110 Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 60 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1115 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 38 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1120 Rated Current(A) = 2.0 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 30 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNH1127 Rated Current(A) = 2.7 ;; Shut-off Current(typ.) ± 20%(A) = ;; Internal Resistance(typ.)(mw ) = 22 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage Temperature(°C)
UNHS200 Rated Current(A) = 0.5 ;; Shut-off Current(typ.) ± 20%(A) = 1.0 ;; Internal Resistance(typ.)(mw ) = 130 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage
UNHS201 Rated Current(A) = 0.7 ;; Shut-off Current(typ.) ± 20%(A) = 1.4 ;; Internal Resistance(typ.)(mw ) = 95 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage
UNHS202 Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = 2.0 ;; Internal Resistance(typ.)(mw ) = 58 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage
UNHS203 Rated Current(A) = 1.2 ;; Shut-off Current(typ.) ± 20%(A) = 2.4 ;; Internal Resistance(typ.)(mw ) = 45 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage
UNHS204 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = 3.0 ;; Internal Resistance(typ.)(mw ) = 38 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage
UNHS205 Rated Current(A) = 1.8 ;; Shut-off Current(typ.) ± 20%(A) = 3.6 ;; Internal Resistance(typ.)(mw ) = 30 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage
UNHS206 Rated Current(A) = 2.3 ;; Shut-off Current(typ.) ± 20%(A) = 4.6 ;; Internal Resistance(typ.)(mw ) = 22 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage
Same catergory

ADM698 : General Purpose. Microprocessor Supervisory Circuits. Superior Upgrade for MAX698/MAX699 Guaranteed RESET Assertion with VCC 1 V Low 0.6 mA Supply Current Precision 4.65 V Voltage Monitor Power OK/Reset Time Delay Watchdog Timer Minimum Component Count Performance Specified over Temperature APPLICATIONS Microprocessor Systems Computers Controllers Intelligent Instruments Automotive Systems Critical P Power.

CS2082 : . The CS2082 controls and monitors two airbag firing loops. The independent firing loops are low­ and high­side controlled. Device communication is through a Serial Peripheral Interface (SPI) port, and includes frame error detection circuitry for data reliability. Diagnostics include squib resistance measurement and continuous monitoring for shorts to ground,.

KIA78L05BP : = 0.15A 3-Terminal Voltage Regulator ;; Package = TO-92L.

LM304 : Adjustable. Negative Regulator (discontinued). The LM104 series are precision voltage regulators which can be programmed by a single external resistor to supply any voltage from 40V down to zero while operating from a single unregulated supply They can also provide 0 01-percent regulation in circuits using a separate floating bias supply where the output voltage is limited only by the breakdown.

MAX1937 : MAX1937, MAX1938, MAX1939 Two-phase Desktop Cpu Core Supply Controllers With Controlled Vid Change.

MAX6763UTAD3 : Low-power, Single/dual-voltage Window Detectors. The MAX6754­MAX6764 low-power window detectors monitor undervoltage/overvoltage conditions on system power supplies. These devices assert when the monitored voltage is under the undervoltage and/or over the overvoltage thresholds. The MAX6754­MAX6759/MAX6763/MAX6764 monitor a single voltage. The MAX6760/MAX6761/MAX6762 monitor dual-voltage systems.

NJM2891 : 2ch Low Dropout Voltage Regulator. s GENERAL The NJM2891 is low dropout voltage regulator designed for cellular phone application. Advanced Bipolar technology achieves low noise, high ripple rejection and low quiescent current. s qHigh Ripple Rejection 70dB typ. (f=1kHz) qOutput Noise Voltage Vno=30µVrms (Cp=0.01µF) qOutput capacitor with 1.0uF ceramic capacitor (Vo2.7V) qOutput Current.

P22TG-1205Z21H35 : Power/w = 5 ;; Input/vdc = 9-18/18-36/36-72 ;; Output/vdc = +/-3,3/5/12/15/18 Regulated ;; ISOlation = 3500V ;; Package = DIP24.

PT4412A : Plug-in Power Solutions->Isolated->Single Output. ti PT4412, 1.05 to 1.75V 30A, 48 V-input ISOlated DC/DC Converter.

SC801 : Fully Integrated High-current Lithium-ion Battery Charger System. Fully Integrated High Current Lithium-Ion Battery Charger System K Fully integrated charger with FET pass transistor, reverse-blocking diode, sense resistor and thermal protection 4.2V & Adjustable Output Voltage Programmable precharge, fastcharge & termination current Battery voltage controlled to 1% accuracy Soft-start for step load and adaptor plug-in.

STF202-22T1 : Transient Voltage Protection->ESD + EMI Filter. Upstream Usb Port Filter & 6V TVS Array, 2-Line, Package: Tsop, Pins=6.

TL1464IPT : Voltage Mode. ti TL1464, Quad Pulse-width-modulation Control Circuit. High-Speed Drive Controller for PNP Power Transistor Internal-Regulator Provides a Stable 1.5 V Reference Supply Low Start-Up Voltage 3.1 V Internal Short-Circuit Protection Internal Undervoltage Lockout Protection Internal Shut-Down Circuit by Channel Controllable Base Current of External Transistor The TL1464I incorporates on a single monolithic chip.

UC1879 : Phase Shift Resonant Controller. Programmable Output Turn On Delay; Zero Delay Available Compatible with Voltage Mode or Current Mode Topologies Practical Operation at Switching Frequencies to 300kHz Four 100mA Totem Pole Outputs 10MHz Error Amplifier Pin Programmable Undervoltage Lockout Low Startup Current - 150µA Soft Start Control Outputs Active Low During UVLO The UC3879 controls.

ZHT431C01 : Adjustable Precision Zener Shunt Regulator. The is a three terminal adjustable e nt temperature stability and output current handling capability to 100mA. The device offers extended operating temperature range working from to +125°C. The output voltage may be set to any chosen voltage between 2.5 and 20 volts by selection of two external divider resistors. The devices can be used as a replacement.

STD11NM60N : This series of devices is realized with the second generation of MDmesh™ Technology. This revolutionary Power MOSFET associates a new vertical structure to the Company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters Applications ■ Switching.

MCP1725 : 500 mA, Low Voltage, Low Quiescent Current LDO Regulator The MCP1725 is a 500 mA, ceramic output cap stable, low output voltage Low Dropout Regulator (LDO) with shutdown and user-programmable delay power good functions..

MAX1982 : Low-Voltage, Low-Dropout Linear Regulators With External Bias Supply The MAX1982/MAX1983 are low-voltage, low-dropout linear regulators with an external bias supply input. The 5V bias supply drives the gate of the internal N-channel pass transistor, making these devices ideal for applications that require low-voltage outputs from low-voltage inputs.

NSI45090JD : 45 V, 90 MA ± 15%, 2.7 W Package, Adjustable Constant Current Regulator & LED Driver, DPAK The adjustable constant current regulator (CCR) is a simple, economical and robust device designed to provide a cost effective solution for regulating current in LEDs. The CCR is based on patent-pending Self-Biased Transistor (SBT) technology and regulates current.

TPS73512 : Single Output LDO, 500mA, Fixed (1.2V), Low Quiescent Current, Low Noise, High PSRR The TPS735xx family of low-dropout (LDO), low-power linear regulators offers excellent ac performance with very low ground current. High power-supply rejection ratio (PSRR), low noise, fast start-up, and excellent line and load transient response are provided while consuming.

TPS62091 : 3A,2.5V To 6V Input, Up To 97% Efficiency, Synchronous Step Down Converter With DCS™ Control The TPS6209x device family is a high frequency synchronous step down converter optimized for small solution size, high efficiency and suitable for battery powered applications. To maximize efficiency, the converter operates in PWM mode with a nominal switching.

 
0-C     D-L     M-R     S-Z