|Category||Power Management => Protection and Isolation => Circuit Protector Elements|
|Title||Circuit Protector Elements|
|Description||Rated Current(A) = 0.7 ;; Shut-off Current(typ.) ± 20%(A) = 1.4 ;; Internal Resistance(typ.)(mw ) = 93 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 +125 ;; Storage Temperature(°C) = -55 to +125 ;; Package = SMini2-F1|
|Company||Panasonic Industrial Company/Electronic Components|
|Datasheet||Download UNHZ201 datasheet
Sharp cutoff characteristics and low voltage drop Flame retardant package and low heat generation, high density mounting is possible.Parameter Operating ambient temperature Storage temperature Symbol Topr Tstg Rating to +125 Unit °C
Parameter Rated voltage Rated current Internal Resistance Cutoff current * 70 Min Typ Max Unit
Note) Measurement condition of cutoff current shall = 25°C, Tolerance of cutoff current shall ± 20%
Package shall be overheated and dangerous for overcurrent. This device should be used only to the secondary circuit. Package will be damaged for added overpower. This device is not electrical fuse legally. Please draw a clear line between electrical fuse from this device.Cutoff line of real ability by pulse 102 Recommendable limit line by pulse 10
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
|Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components|
|UNHZ202 Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = 2.0 ;; Internal Resistance(typ.)(mw ) = 59 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 +93 ;; Storage Temperature(°C)|
|UNHZ203 Rated Current(A) = 1.2 ;; Shut-off Current(typ.) ± 20%(A) = 2.4 ;; Internal Resistance(typ.)(mw ) = 46 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage|
|UNHZ204 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = 3.0 ;; Internal Resistance(typ.)(mw ) = 35 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage|
|UNR1110 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1111 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1112 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1113 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1114 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1115 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1116 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1117 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1118 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
EEE-1AA221AP : 220µF Aluminum Capacitor Radial, Can - SMD 10V; CAP ALUM 220UF 10V 20% SMD Specifications: Capacitance: 220µF ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 2000 Hrs @ 85°C ; Size / Dimension: 0.315" Dia (8.00mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.327" L x 0.327" W (8.30mm x 8.30mm) ; Mounting Type: Surface Mount ; Packa
ECE-V2AA220UP : 22µF Aluminum Capacitor Radial, Can - SMD 100V; CAP ALUM 22UF 100V 20% SMD Specifications: Capacitance: 22µF ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 2000 Hrs @ 85°C ; Size / Dimension: 0.394" Dia (10.00mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.406" L x 0.406" W (10.30mm x 10.30mm) ; Mounting Type: Surface Mount ; Pac
ECW-H10163RJV : 0.016µF Film Capacitor Radial; CAP FILM 0.016UF 1KVDC RADIAL Specifications: Capacitance: 0.016µF ; Tolerance: ±5% ; Dielectric Material: Polypropylene, Metallized ; Package / Case: Radial ; Packaging: Tape & Box (TB) ; Lead Spacing: 0.295" (7.50mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; Features: High Frequency and High S
EFJ-G25EF01 : Shock PIEZO MECHANICAL SHOCK SENSOR -; PIEZO MECHANICAL SHOCK SENSOR Specifications: Type: Piezo Mechanical ; Specifications: Wide Frequency Range 80 ~ 10,000Hz, Small and Lightweight ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant
EXB-24V822JX : Resistor 8.2K Ohm 62.5mW 2 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 8.2K OHM 2 RES 0404 Specifications: Resistance (Ohms): 8.2K ; Tolerance: ±5% ; Power Per Element: 62.5mW ; Circuit Type: Isolated ; Number of Pins: 4 ; Packaging: Digi-Reel® ; Number of Resistors: 2 ; Package / Case: 0404 (1010 Metric), Convex ; Mounting Type: Surface Mount ; Temperature Coefficient: ±200ppm/°C ; Lead
ERJ-XGNJ203Y : 20K Ohm 0.03W, 1/32W Chip Resistor - Surface Mount; RESISTOR 20K OHM 1/32W 5% 01005 Specifications: Resistance (Ohms): 20K ; Power (Watts): 0.03W, 1/32W ; Tolerance: ±5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±200ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ERA-6AEB4991V : 4.99K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 4.99K OHM 1/8W .1% 0805 SMD Specifications: Resistance (Ohms): 4.99K ; Power (Watts): 0.125W, 1/8W ; Tolerance: ±0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: ±25ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ERJ-14NF5103U : 510K Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 510K OHM 1/2W 1% 1210 SMD Specifications: Resistance (Ohms): 510K ; Power (Watts): 0.5W, 1/2W ; Tolerance: ±1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
UNR52A6G0L : Transistor (bjt) - Single, Pre-biased Discrete Semiconductor Product 80mA 50V 150mW NPN - Pre-Biased; TRANS NPN W/RES 160HFE S-MINI 3P Specifications: Transistor Type: NPN - Pre-Biased ; Voltage - Collector Emitter Breakdown (Max): 50V ; Current - Collector (Ic) (Max): 80mA ; Power - Max: 150mW ; Resistor - Base (R1) (Ohms): 4.7K ; Resistor - Emitter Base (R2) (Ohms): - ; Vce Saturation (Max) @ Ib, Ic: 250mV @ 300µA, 10mA ; Current
AAT3524IGY-232-200-T1 : Micropower Microprocessor Reset Circuit. MicroPower Microprocessor Reset Circuit General The AAT3520 Series of PowerManagerTM products is a member of AATI's Total Power Management ICTM (TPMICTM) product family. These microprocessor reset circuits are ideal for monitoring voltage supplies in portable systems, where extended battery life is critical. They provide a low cost, reliable solution.
DCP022415D : . TO 89% EFFICIENCY THERMAL PROTECTION DEVICE-TO-DEVICE SYNCHRONIZATION SO-28 POWER DENSITY (6.5W/cm3) EN55022 CLASS B EMC PERFORMANCE UL1950 RECOGNIZED JEDEC 14-PIN AND SO-28 PACKAGES The DCP02 series is a family of 2W, unregulated, isolated DC/DC converters. Requiring a minimum of external components and including on-chip device protection, the DCP02.
LM345 : Fixed. Negative 3-amp Regulator (discontinued). The is a three-terminal negative regulator with a fixed output voltage of b5V and to 3A load current capability This device needs only one external component a compensation capacitor at the output making it easy to apply Worst case guarantees on output voltage deviation due to any combination of line load or temperature variation assure satisfactory.
LNBK20D2 : LNB Supply And Control Voltage Regulator (PARALLEL INTERFACE). LNB SUPPLY AND CONTROL VOLTAGE REGULATOR (PARALLEL INTERFACE) COMPLETE INTERFACE FOR TWO LNBs REMOTE SUPPLY AND CONTROL GUARANTEED 400mA OUTPUT CURRENT LNB SELECTION AND STAND-BY FUNCTION BUILT-IN TONE OSCILLATOR FACTORY TRIMMED AT 22KHz FAST OSCILLATOR START-UP FACILITATES DiSEqCTM ENCODING TWO SUPPLY INPUTS FOR LOWEST DISSIPATION BYPASS FUNCTION FOR SLAVE.
MIC5191 : Ultra High-Speed, High-current Active Filter/ldo Controller The MIC5191 is an Ultra High-speed Linear Regulator. It Uses an External N-channel Fet as Its Power Device. The MIC5191's Ultra High-speed Abilities CAN Handle The Fast Load Demands of Microprocessor Cores, Asics, And Other High-speed Devices. Signal Bandwidths of Greater Than 500kHz CAN be Achieved.
PT7749A : Plug-in Power Solutions->Non-Isolated->Single Posi. ti PT7749, 18Amp 'Current Booster' For The PT7700/PT7770 Series.
TDA3676A : TDA3676; Low Dropout Voltage/quiescent Current 10 V Voltage Regulator With Enable;; Package: SOT96 (SO8).
TK11860B : Panel Driver. Panel Capacitance = White Led Driver DC-DC Step-up Converter ic ;; Package = Flip Chip 8 FC-8.
TLE6244X : 18 Channel Smart Lowside Switch. Short Circuit Protection Overtemperature Protection Overvoltage Protection 16 bit Serial Data Input and Diagnostic Output (2 bit/chan. acc. SPI Protocol) Direct Parallel Control of 16 channels for PWM Applications Low Quiescent Current Compatible with 3.3V Microcontrollers Electrostatic discharge (ESD) Protection General 18-fold Low-Side Switch ) in Smart.
VRE305 : Output (V) = +5.0 ;; Initial Error (mV) = 0.5, 0.8, 1.0 ;; Temp Error (ppm/oC) = 0.6, 1.0, 2.0 ;; Noise (µVpp) = 3 ;; Package = DIP8, SMT8 ;; Feature = Low Cost.
LM3557 : Step-Up Converter for White LED Applications The LM3557 is a complete solution for white LED drive applications. With minimal external component count, no DC current leakage paths to ground, cycle-by-cycle current limit protection, and output over-voltage protection circuitry, the LM3557 offer superior performance and cost savings over standard DC/DC.
NTD4806N : Power MOSFET 30 V, 88 A, Single N-Channel, DPAK/IPAK. Low RDS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These are Pb-Free Devices Applications CPU Power Delivery DC-DC Converters Low Side Switching Parameter Drain-to-Source Voltage Gate-to-Source Voltage Continuous Drain Current (RqJA) (Note 1) Power Dissipation (RqJA).
L5983 : Package A free-form text of the package type. Status The current status of a product: Preview: Product proposal has been announced. Evaluation: The period in which customer samples become available. Active: Product is in volume production., NRND: Not Recommended for New Design, Product is fully available to support existing customers but is not recommended.
L5980 : Package A free-form text of the package type. Status The current status of a product: Preview: Product proposal has been announced. Evaluation: The period in which customer samples become available. Active: Product is in volume production., NRND: Not Recommended for New Design, Product is fully available to support existing customers but is not recommended.
PTH08T250W : 50A, 4.5V to 14V Input, Non-Isolated, Wide Output, Adjustable Power Module with TurboTrans The PTH08T250W is a high-performance 50-A rated, non-isolated power module. This module represents the 2nd generation of the popular PTH series power modules with a reduced footprint and improved . Operating from an input voltage range of 4.5 V to 14 V, the PTH08T250W.
LTC3868-1 : Low IQ, Dual 2-Phase Synchronous 2-Phase Synchronous Step-Down Controller The LTC3868-1 is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant frequency current mode architecture allows a phase-lockable frequency of up to 850kHz. Power loss and noise due to the input.
TPS61166 : White LED Driver W/ Integrated Power Diode And Fast Burst Dimming Mode The TPS61166 is a boost converter with a 20-V rated integrated switch FET and power diode that drives up to 5 LEDs in series. This device integrates a high side switch FET that can turn on/off the LED current within 1-µs of the applied external PWM signal. The high side switch also.