|Category||Power Management => Protection and Isolation => Circuit Protector Elements|
|Title||Circuit Protector Elements|
|Description||Rated Current(A) = 1.0 ;; Shut-off Current(typ.) ± 20%(A) = 2.0 ;; Internal Resistance(typ.)(mw ) = 59 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 +93 ;; Storage Temperature(°C) = -55 +93 ;; Package = SMini2-F1|
|Company||Panasonic Industrial Company/Electronic Components|
|Datasheet||Download UNHZ202 datasheet
Sharp cutoff characteristics and low voltage drop Flame retardant package and low heat generation, high density mounting is possible.Parameter Operating ambient temperature Storage temperature Symbol Topr Tstg Rating to +125 Unit °C
Parameter Rated voltage Rated current Internal Resistance Cutoff current * 45 Min Typ Max Unit
Note) Measurement condition of cutoff current shall = 25°C, Tolerance of cutoff current shall ± 20%
Package shall be overheated and dangerous for overcurrent. This device should be used only to the secondary circuit. Package will be damaged for added overpower. This device is not electrical fuse legally. Please draw a clear line between electrical fuse from this device.Cutoff line of real ability by pulse 102 Recommendable limit line by pulse 10
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
|Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components|
|UNHZ203 Rated Current(A) = 1.2 ;; Shut-off Current(typ.) ± 20%(A) = 2.4 ;; Internal Resistance(typ.)(mw ) = 46 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage|
|UNHZ204 Rated Current(A) = 1.5 ;; Shut-off Current(typ.) ± 20%(A) = 3.0 ;; Internal Resistance(typ.)(mw ) = 35 ;; Rated Voltage(V) = 50 ;; Operating Ambient Temperature(°C) = -55 to +125 ;; Storage|
|UNR1110 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1111 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1112 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1113 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1114 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1115 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1116 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1117 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1118 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
|UNR1119 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1|
MAZ8120-H : Silicon Planar Type
FBA04T05LZA : Locked Rotor Protection Circuits Automatically Restarts in a few Seconds Reverse Voltage Protection
ELJFAR68F2 : Fixed Inductors (chip Inductors)
ECOS2GA221CA : Large Can Aluminum Electrolytic Capacitors
EEF-WA1C181P : 180µF Aluminum Capacitor Radial, Can - SMD 16V; CAP ALUM 180UF 16V 20% SMD Specifications: Capacitance: 180µF ; ESR (Equivalent Series Resistance): 29.0 mOhm ; Features: Polymer ; Lifetime @ Temp.: 2000 Hrs @ 105°C ; Size / Dimension: 0.394" Dia (10.00mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.406" L x 0.406" W (10.30mm x 10.30mm) ; Mounting Type: Surface Mount ; P
ECO-S2GA560AA : 56µF Aluminum Capacitor Radial, Can - Snap-In 400V; CAP ALUM 56UF 400V 20% SNAP Specifications: Capacitance: 56µF ; ESR (Equivalent Series Resistance): 2.368 Ohm ; Features: General Purpose ; Lifetime @ Temp.: 3000 Hrs @ 105°C ; Size / Dimension: 0.787" Dia (20.00mm) ; Lead Spacing: 0.394" (10.00mm) ; Surface Mount Land Size: - ; Mounting Type: Through Hole ; Package / Case: Ra
ECQ-U2A473MN : 0.047µF Film Capacitor Radial; CAP FILM 0.047UF 250VAC RADIAL Specifications: Capacitance: 0.047µF ; Tolerance: ±20% ; Dielectric Material: Polyester/Polypropylene, Metallized ; Package / Case: Radial ; Packaging: Bulk ; Lead Spacing: 0.847" (21.50mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; Features: EMI Suppression ; Lead Free
ECW-H10132RJV : 1300pF Film Capacitor Radial; CAP FILM 1300PF 1KVDC RADIAL Specifications: Capacitance: 1300pF ; Tolerance: ±5% ; Dielectric Material: Polypropylene, Metallized ; Package / Case: Radial ; Packaging: Tape & Box (TB) ; Lead Spacing: 0.295" (7.50mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; Features: High Frequency and High St
ERA-2AEB2371X : 2.37K Ohm 0.063W, 1/16W Chip Resistor - Surface Mount; RES 2.37K OHM 1/16W .1% 0402 SMD Specifications: Resistance (Ohms): 2.37K ; Power (Watts): 0.063W, 1/16W ; Tolerance: ±0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: ±25ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
2SC5361 : NPN Triple Diffused Type ( Switching Regulator, High Voltage Switching, DC-DC Converter Applications ).
DG182AA : High-speed Drivers With JFET Switch. The DG181 thru DG191 series of analog gates consist or 4 N-channel junction-type field-effect transistors (JFET) designed to function as electronic switches. Level-shifting drivers enable low-level inputs 2V) to control the ON-OFF state of each switch. The driver is designed to provide a turn-off speed which is faster than turn-on speed, so that break-before-make.
MC1404 : Voltage Reference Family. The MC1404 of ICs is a family of temperaturecompensated voltage references for precision data conversion applications, such as A/D, D/A, V/F, and F/V. Advances in lasertrimming and ionimplanted devices, as well as monolithic fabrication techniques, make these devices stable and accurate to 12 bits over both military and commercial temperature ranges.
MC44604P : Off-Line Controllers. Up-to-250kHz Flyback PWM Voltage-mode Controller With Programmable Standby Mode, Package: Pdip, Pins=16.
NCP5210 : 3-In-1 PWM Dual Buck And Linear DDR Power Controller The NCP5210, 3−in−1 PWM Dual Buck And Linear DDR PowerController, is a Complete Power Solution For MCH And DDR Memory.this ic Combines The Efficiency of PWM Controllers For The Vddqsupply And The MCH Core Supply Voltage With The Simplicity of Linearregulator For The VTT Termination Voltage..
PT4497 : . to 75V Input Voltage Range Programmable Output Voltage Range: to +85°C Operating Temp 1500 VDC Isolation 89% Efficiency On/Off Inhibit Differential Remote Sense 17A Output with PT4497 Over-Current Protection Over-Temperature Protection Over-Voltage Protection Space-Saving Package Solderable Copper Case Safety Approvals: UL 60950 CSA 22.2 950 VDE EN60950.
PT7709A : Plug-in Power Solutions->Non-Isolated->Single Posi. ti PT7709, 20 Amp 5V-Input Next Generation 'Big Hammer' Programmable Isr.
SI-3050C : Low-Voltage, High-current Linear Regulator. 5-Terminal, Multi-Function, Full-Mold, Low Dropout Voltage Dropper Type Compact full-mold package (equivalent to TO220) Output current: 1.5A Low dropout voltage: VDIF1V (at IO=1.5A) Variable output voltage (rise only) May be used for remote sensing Output ON/OFF control terminal is compatible with LS-TTL. (It may be directly driven by LS-TTL or standard.
SMCTAA32N14A10 : . This voltage controlled Solidtron (VCS) discharge switch utilizes an n-type MOS-Controlled Thyristor mounted in a five leaded TO247 plastic package. The VCS the high peak current capability and low Onstate voltage drop common to SCR thyristors combined with extremely high dI/dt capability. This semiconductor is intended for the control of high power.
UPC7812AHF : Three Terminal Positive Voltage Regulators.
ZR431LF01TA : Ic-adj. Voltage Regulator. The is a three terminal adjustable nt temperature stability and output current handling capability to 25mA. The output voltage may be set to any chosen voltage between 1.24 and 10 volts by selection of two external divider resistors. The devices can be used as a replacement for zener diodes in many applications me nt performance. The ZR431L is particularly.
LM5101A : The LM5100A/B/C and LM5101A/B/C High Voltage Gate Drivers are designed to drive both the high-side and the low-side N-Channel MOSFETs in a synchronous buck or a half-bridge configuration. The floating high-side driver is capable of operating with supply voltages up to 100V. The "A" versions provide a full 3A of gate drive while the "B" and "C" versions.
LTC3521 : Wide VIN, 1A Buck-Boost DC/DC And Dual 600mA Buck DC/DC Converters The LTC3521 combines a 1A buck-boost DC/DC converter and dual 600mA synchronous buck DC/DC converters. The 1.1MHz switching frequency minimizes the solution footprint while maintaining high efficiency. All three converters feature soft-start and internal compensation to minimize the solution.
IRS2573DSPBF : HID Ballast Control IC The IRS2573D is a fully-integrated, fully-protected 600V HID control IC designed to drive all types of HID lamps. Internal circuitry provides control for ignition, warm-up, running and fault operating modes. The IRS2573D include ignition timing control, constant lamp power control, programmable full-bridge running frequency, programmable.
PT7M7825RDE : µ µ µ µ µP Supervisor Circuits The PT7M7xxx family microprocessor (µP) supervisory circuits are targeted to improve reliability and accuracy of power-supply circuitry in µP systems. These devices reduce the complexity and number of components required to monitor power-supply and battery functions..