|Category||Discrete => Transistors => Bipolar => RETs (Resistor Equipped transistors)|
|Title||RETs (Resistor Equipped transistors)|
|Description||Marking = en ;; V<SUB>CEO</SUB>(V) = -50 ;; I<SUB>C</SUB>(A) = -0.08 ;; P<SUB>T</SUB>(W) = 0.1 ;; R<SUB>1</SUB>(kW ) = 22 ;; R<SUB>2</SUB>(kW ) = ;; Package = SSSMini3-F1|
|Company||Panasonic Industrial Company/Electronic Components|
|Datasheet||Download UNR31AT datasheet
Suitable for high-density mounting and downsizing of the equipment Contribute to low power consumption
Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Collector current Total power dissipation Junction temperature Storage temperature Symbol VCBO VCEO PT Tj Tstg Rating to +125 Unit mW °C
Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Collector-base cutoff current (Emitter open) Collector-emitter cutoff current (Base open) Emitter-base cutoff current (Collector open) Forward current transfer ratio Collector-emitter saturation voltage Output voltage high-level Output voltage low-level Input resistance Resistance ratio Transition frequency Symbol VCBO VCEO ICBO ICEO IEBO hFE VCE(sat) VOH VOL 2 fT VCB = 1 mA, = 200 MHz Conditions = -10 µA, = -2 mA, = 0 VCB = 0 VCE = 0 VEB = 0 VCE = -10 mA, 0.3 mA VCC 1 k VCC 1 k Min Typ Max Unit µA mA MHz
Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
Collector output capacitance C (pF) (Common base, input open circuited) ob
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
|Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components|
|UNR32A0 Marking = KT ;; VCEO(V) = 50 ;; IC(A) = 0.08 ;; PT(W) = 0.1 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = SSSMini3-F1|
|UNR32A1 Marking = FK ;; VCEO(V) = 50 ;; IC(A) = 0.08 ;; PT(W) = 0.1 ;; R1(kW ) = 10 ;; R2(kW ) = 10 ;; Package = SSSMini3-F1|
|UNR32A3 Marking = FN ;; VCEO(V) = 50 ;; IC(A) = 0.08 ;; PT(W) = 0.1 ;; R1(kW ) = 47 ;; R2(kW ) = 47 ;; Package = SSSMini3-F1|
|UNR32A4 Marking = FP ;; VCEO(V) = 50 ;; IC(A) = 0.8 ;; PT(W) = 0.1 ;; R1(kW ) = 10 ;; R2(kW ) = 47 ;; Package = SSSMini3-F1|
|UNR32A5 Marking = HC ;; VCEO(V) = 50 ;; IC(A) = 0.08 ;; PT(W) = 0.1 ;; R1(kW ) = 10 ;; R2(kW ) = ;; Package = SSSMini3-F1|
|UNR32A6 Marking = HD ;; VCEO(V) = 50 ;; IC(A) = 0.08 ;; PT(W) = 0.1 ;; R1(kW ) = 4.7 ;; R2(kW ) = ;; Package = SSSMini3-F1|
|UNR32A7 Marking = he ;; VCEO(V) = 50 ;; IC(A) = 0.08 ;; PT(W) = 0.1 ;; R1(kW ) = 22 ;; R2(kW ) = ;; Package = SSSMini3-F1|
|UNR32AA Marking = HL ;; VCEO(V) = 50 ;; IC(A) = 0.08 ;; PT(W) = 0.1 ;; R1(kW ) = 100 ;; R2(kW ) = 100 ;; Package = SSSMini3-F1|
|UNR32AM Marking = KH ;; VCEO(V) = 50 ;; IC(A) = 0.08 ;; PT(W) = 0.1 ;; R1(kW ) = 2.2 ;; R2(kW ) = 47 ;; Package = SSSMini3-F1|
|UNR32AN Marking = KL ;; VCEO(V) = 50 ;; IC(A) = 0.08 ;; PT(W) = 0.1 ;; R1(kW ) = 4.7 ;; R2(kW ) = 47 ;; Package = SSSMini3-F1|
|UNR4110 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.3 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = NS-A1NS-B1|
|UNR4121 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.5 ;; PT(W) = 0.3 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = NS-A1NS-B1|
|UNR4122 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.5 ;; PT(W) = 0.3 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = NS-A1NS-B1|
|UNR4123 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.5 ;; PT(W) = 0.3 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = NS-A1NS-B1|
|UNR4124 Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.5 ;; PT(W) = 0.3 ;; R1(kW ) = 2.2 ;; R2(kW ) = 2.2 ;; Package = NS-A1NS-B1|
LN513YK : Numerical Display Devices Numeric Size (mm) = 7.6 ;; Numeric Size (inch) = 0.3 ;; Element = 1 ;; Brightness = ;; Lighting Color = Orange ;; Common Terminal = Anode ;; Remarks = ;; Package =
EEFCD0G101R : Specialty Polymer Aluminum Electrolytic Capacitor
EEUFC1A392L : Aluminum Electrolytic Capacitors/fc
ECQ-E2683JFB : 0.068µF Film Capacitor Radial; CAP FILM 0.068UF 250VDC RADIAL Specifications: Capacitance: 0.068µF ; Tolerance: ±5% ; Dielectric Material: Polyester, Metallized ; Package / Case: Radial ; Packaging: Bulk ; Lead Spacing: 0.295" (7.50mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; Features: General Purpose ; Lead Free Status: Lead Fre
EFO-MN5004A4 : 5MHz Resonator Crystal And Oscillator Ceramic; CER RESONATOR 5.0 MHZ Specifications: Frequency: 5MHz ; Package / Case: Radial, Box - 2 Lead, 5.00mm Pitch ; Features: without Capacitor ; Packaging: Bulk ; Type: Ceramic ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant
ELL-6SH5R6M : Fixed Inductors, Coils, Choke 5.6µH 1.8A 0.251" L x 0.236" W x 0.129" H (6.40mm x 6.00mm x 3.30mm) -; COIL 5.6UH 1800MA CHOKE SMD Specifications: Inductance: 5.6µH ; Tolerance: ±20% ; Package / Case: 0.251" L x 0.236" W x 0.129" H (6.40mm x 6.00mm x 3.30mm) ; Packaging: Digi-Reel® ; Type: - ; Current: 1.8A ; Mounting Type: Surface Mount ; Q @ Freq: - ; Frequency - Self Resonant: - ; DC Resistance (DCR): 49 mOhm ; Shielding: Sh
ELJ-NA3R9JF : Fixed Inductors, Coils, Choke 3.9µH 95mA 1210 (3225 Metric) Non-Magnetic Core; INDUCTOR 3.9UH 5% FIXED SMD Specifications: Inductance: 3.9µH ; Tolerance: ±5% ; Package / Case: 1210 (3225 Metric) ; Packaging: Digi-Reel® ; Type: Non-Magnetic Core ; Current: 95mA ; Mounting Type: Surface Mount ; Q @ Freq: 13 @ 7.96MHz ; Frequency - Self Resonant: 57MHz ; DC Resistance (DCR): 4.4 Ohm Max ; Shielding: Unshiel
LNJ247W82RA : LEDs -; LED RED RECTANGLE SMD Specifications: Color: Red ; Lens Style/Size: Rectangle with Flat Top, 0.7mm x 0.5mm ; Millicandela Rating: 16mcd ; Voltage - Forward (Vf) Typ: 1.95V ; Wavelength - Dominant: 630nm ; Wavelength - Peak: 645nm ; Current - Test: 5mA ; Viewing Angle: - ; Lens Type: - ; Luminous Flux @ Current - Test: -
ERJ-3EKF3921V : 3.92K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 3.92K OHM 1/10W 1% 0603 SMD Specifications: Resistance (Ohms): 3.92K ; Power (Watts): 0.1W, 1/10W ; Tolerance: ±1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ERJ-B3BJ1R1V : 1.1 Ohm 0.333W, 1/3W Chip Resistor - Surface Mount; RES WIDE TERM 1.1 OHM 5% 0805 Specifications: Resistance (Ohms): 1.1 ; Power (Watts): 0.333W, 1/3W ; Tolerance: ±5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±200ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
AXN490C330J : HEADER CONNECTOR,PCB MNT,RECEPT,90 CONTACTS,PIN,0.031 PITCH,LOCKING MECH Specifications: Connector Type: TWO PART BOARD CONNECTOR
ERA3YHD100V : RESISTOR, METAL FILM, 0.1 W, 0.5 %, 50 ppm, 10 ohm, SURFACE MOUNT, 0603 Specifications: Category / Application: General Use ; Technology / Construction: MetalFilm ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), 0603, CHIP ; Resistance Range: 10 ohms ; Tolerance: 0.5000 +/- % ; Temperature Coefficient: 50 Â±ppm/Â°C ; Power Rating: 0.1000 watts (1.34E-4 HP)
1N5807US : Superfast Surface-mount Rectifier, 50 V-150 V, Io=6.0 a. SURFACE MOUNT HERMETICALLY SEALED ULTRAFAST RECTIFIER DIODE= Extremely low reverse recovery time= Hermetically sealed to ensure reliable operation under Very low switching losses= Soft, non-snap off, recovery characteristics= Very low forward voltage drop ABSOLUTE MAXIMUM RATINGS 25°C unless otherwise specified) PARAMETER Working reverse voltage Repetitive.
5HP02C : . s Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10µs, duty cycle1% Conditions Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage.
APT40N60JCU2 : Boost Chopper Coolmos. Application AC and DC motor control Switched Mode Power Supplies Power Factor Correction Brake switch - Ultra low RDSon - Low Miller capacitance - Ultra low gate charge - Avalanche energy rated ISOTOP® Package (SOT-227) Very low stray inductance High level of integration Benefits Outstanding performance at high frequency operation Stable temperature.
AR3008 : . Repetitive voltage up to Mean forward current Surge current 30.2 kA Repetitive peak reverse voltage Non-repetitive peak reverse voltage Repetitive peak reverse current V=VRRM Mean forward current Mean forward current Surge forward current I² t Forward voltage Threshold voltage Forward slope resistance 180° sin ,50 Hz, Th=55°C, double side cooled 180°.
BDY56 : Screening Options Available = ;; Polarity = NPN ;; Package = TO3 (TO204AA) ;; Vceo = 120V ;; IC(cont) = 15A ;; HFE(min) = 20 ;; HFE(max) = 70 ;; @ Vce/ic = 4V / 4A ;; FT = 10MHz ;; PD = 117W.
HFA45HC60C : Hexfred(tm) Ultra Fast, Soft Recovery Diode 1200v, 32a. Reduced RFI and EMI Reduced Snubbing Extensive Characterization of Recovery Parameters Hermetic HEXFRED diodes are optimized to reduce losses and EMI/RFI in high frequency power conditioning systems. An extensive characterization of the recovery behavior for different values of current, temperature and di/dt simplifies the calculations of losses in the operating.
MBR2060CT : 20 Ampere Schottky Barrier Rectifiers. Low power loss, high efficiency. High surge capacity. For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications. Metal silicon junction, majority carrier conduction. High current capacity, low forward voltage drop. Guard ring for over voltage protection. 2035CT Maximum Repetitive Reverse Voltage Average Rectified.
VCR11N : Voltage-controlled Resistors. N-Channel Silicon Voltage Controlled Resistor JFET Small Signal Attenuators Filters Amplifier Gain Control Oscillator Amplitude Control Reverse Gate Source & Reverse Gate Drain Voltage Continuous Forward Gate Current Continuous Device Power Dissipation Power Derating At 25°C free air temperature: Static Electrical Characteristics Gate Source Breakdown.
03029BP330AJMC : CAP,CERAMIC,33PF,50VDC,5% -TOL,5% +TOL,BP TC CODE,-30,30PPM TC,0402 CASE. s: Dielectric: Ceramic Composition.
050022R7CCMP : CAPACITOR, CERAMIC, MULTILAYER, 200 V, BP, 0.0000027 uF, SURFACE MOUNT, 0603. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Dielectric: Ceramic Composition ; RoHS Compliant: Yes ; Capacitance Range: 2.70E-6 microF ; Capacitance Tolerance: 9 (+/- %) ; WVDC: 200 volts ; Temperature Coefficient: 30 ppm/Â°C ; Mounting Style:.
CM900DUC-24NF : 900 A, 1200 V, N-CHANNEL IGBT. s: Polarity: N-Channel ; Package Type: ROHS COMPLIANT PACKAGE-9 ; Number of units in IC: 2.
DDC2353-000 : SILICON, ZERO BARRIER SCHOTTKY, K BAND, MIXER DIODE. s: Diode Type: MIXER DIODE ; Diode Applications: Mixer ; RoHS Compliant: RoHS.
FHBAT54A : 0.2 A, 2 ELEMENT, SILICON, SIGNAL DIODE. s: Arrangement: Common Anode ; Diode Type: General Purpose ; IF: 200 mA ; Package: SOT23, SOT-23, 3 PIN ; Pin Count: 3 ; Number of Diodes: 2.
MPCG-0740-LR42 : 1 ELEMENT, 0.4 uH, GENERAL PURPOSE INDUCTOR, SMD. s: Mounting Option: Surface Mount Technology ; Devices in Package: 1 ; Lead Style: WRAPAROUND ; Standards and Certifications: RoHS ; Application: General Purpose, High Current ; Inductance Range: 0.4000 microH.
NSH10A : RESISTOR, WIRE WOUND, 10 W, 5; 10 %, 300 ppm, 0.39 ohm - 50 ohm, CHASSIS MOUNT. s: Category / Application: General Use ; Technology / Construction: Wirewound ; Mounting / Packaging: Bolt-on Chassis, Radial Leads, RADIAL LEADED ; Operating DC Voltage: 250 volts ; Operating Temperature: -55 to 155 C (-67 to 311 F).
SH035M0100ST : CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 35 V, 100 uF, THROUGH HOLE MOUNT. s: : Polarized ; Capacitance Range: 100 microF ; Capacitance Tolerance: 20 (+/- %) ; WVDC: 35 volts ; Leakage Current: 115 microamps ; Mounting Style: Through Hole ; Operating Temperature: -40 to 105 C (-40 to 221 F).
SHD426110 : 2 A, 80 V, NPN, Si, POWER TRANSISTOR, TO-257AA. s: Polarity: NPN ; Package Type: HERMETIC SEALED, TO-257, 3 PIN.
SQ4435EY-T1-GE3 : 15000 mA, 30 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET. s: Polarity: P-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 30 volts ; rDS(on): 0.0180 ohms ; Package Type: HALOGEN FREE AND ROHS COMPLIANT, SOP-8 ; Number of units in IC: 1.
2220Y6300181JXB : CAP,CERAMIC,180PF,630VDC,5% -TOL,5% +TOL,X7R TC CODE,-15,15% TC,2220 CASE. s: Applications: General Purpose ; Electrostatic Capacitors: Ceramic Composition.
2N4401TPE1 : 600 mA, 40 V, NPN, Si, SMALL SIGNAL TRANSISTOR, TO-92. s: Polarity: NPN.