|Category||Discrete => Transistors => Composite Transistors|
|Description||Marking = 7P ;; V<SUB>CEO</SUB>(V) = -50 ;; V<SUB>CEO</SUB>(Tr2)(V) = ;; I<SUB>C</SUB>(A) = -0.1 ;; I<SUB>C</SUB>(Tr2)(A) = ;; P<SUB>T</SUB>(W) = 0.15 ;; R<SUB>1</SUB>(kW ) = 1 ;; R<SUB>2</SUB>(Tr2)(kW ) = ;; Package = SMini5-G1|
|Company||Panasonic Industrial Company/Electronic Components|
|Datasheet||Download XP01119 datasheet
|Cross ref.||Similar parts: RN2714|
Parameter Collector to base voltage Rating Collector to emitter voltage of element Collector current Total power dissipation Overall Junction temperature Storage temperature Symbol VCBO VCEO PT Tj Tstg
Parameter Collector to base voltage Collector to emitter voltage Collector cutoff current Emitter cutoff current Forward current transfer ratio Forward current transfer hFE ratio Collector to emitter saturation voltage Output voltage high level Output voltage low level Transition frequency Input resistance Resistance ratio
Symbol VCBO VCEO ICBO ICEO IEBO hFE (small/large)*1 VCE(sat) VOH VOL R1 R1/R2 Conditions = 0 VCB = 0 VCE = 0 VEB = 0 VCE = 5mA VCE 0.3mA VCC = 1k VCC = 1k VCB 200MHz V MHz k min typ max Unit µA mANote) The Part number in the Parenthesis shows conventional part number.
Two elements incorporated into one package. (Emitter-coupled transistors with built-in resistor) Reduction of the mounting area and assembly cost by one half.
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
|Related products with the same datasheet|
|Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components|
|XP0111F Marking = 7O ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 4.7 ;; R2(Tr2)(kW|
|XP0111H Marking = 9X ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 2.2 ;; R2(Tr2)(kW|
|XP0111M Marking = ek ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 2.2 ;; R2(Tr2)(kW|
|XP01210 Marking = ac ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 47 ;; R2(Tr2)(kW|
|XP01211 Marking = 9T ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 10 ;; R2(Tr2)(kW|
|XP01212 Marking = 9K ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 22 ;; R2(Tr2)(kW|
|XP01213 Marking = 9L ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 47 ;; R2(Tr2)(kW|
|XP01214 Marking = 9H ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 10 ;; R2(Tr2)(kW|
|XP01215 Marking = 9M ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 10 ;; R2(Tr2)(kW|
|XP01216 Marking = 9N ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 4.7 ;; R2(Tr2)(kW|
|XP01217 Marking = 9P ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 22 ;; R2(Tr2)(kW|
IRFK6H250 : ISOlated Base Power Hex Pak(tm) Assembly- Parallel Chip Configuration: 200v, 140a.
KBU400 : Discrete, Diodes, Bridges. Mechanical Data: Weight - 0.3 Ounces. Mounting Torque 5.1 lbs. Mounting Position - Any. n COMPACT SIZE n LOW LEAKAGE CURRENT n 200 AMP SURGE OVERLOAD RATING n MEETS UL 94V-0 Electrical Characteristics @ 25oC. Maximum Ratings Peak Repetitive Reverse VoltageVRRM RMS Reverse VoltageVR(rms) DC Blocking VoltageVDC Average Forward Rectified CurrentIF(av).
SD1273 : Amplifier. RF NPN Transistor: 13.6v.
STP4NA60 : Medium Voltage. Old PRODUCT: Not Suitable For Design-in. N - CHANNEL ENHANCEMENT MODE FAST POWER MOS TRANSISTOR TYPICAL RDS(on) ± 30V GATE TO SOURCE VOLTAGE RATING 100% AVALANCHE TESTED REPETITIVE AVALANCHE DATA AT 100oC LOW INTRINSIC CAPACITANCES GATE GHARGE MINIMIZED REDUCED THRESHOLD VOLTAGE SPREAD TO-220 This series of POWER MOSFETS represents the most advanced high voltage technology. The optimized cell.
T2161N : SCR / Diode Presspacks. Volle Sperrfähigkeit bei 125° mit 50 Hz Hohe Stoßströme und niedriger Wärmewidererstand durch NTV-Verbindung zwischen Silizium und Mo-Trägerscheibe. Elektroaktive Passivierung durch a - C:H Full blocking capability at 125°C with 50 Hz High surge currents and low thermal resistance by using low temperature-connection NTV between silicon wafer and molybdenum.
TXDV12 : 10A - 12A - 16A. Alternistors. VERY HIGH COMMUTATION > 42.5 A/ms (400Hz) INSULATING VOLTAGE = 2500V(RMS) (UL RECOGNIZED : E81734) dV/dt : 500 V/µs min The TXDV 412 812 use a high performance passivated glass alternistor technology. Featuring very high commutation levels and high surge current capability, this family is well adapted to power control on inductive load (motor, transformer).
03028-BR122BJZB : CAPACITOR, CERAMIC, MULTILAYER, 100 V, BR, 0.0012 uF, SURFACE MOUNT, 0603. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Applications: General Purpose ; Electrostatic Capacitors: Ceramic Composition ; Capacitance Range: 0.0012 microF ; Capacitance Tolerance: 5 (+/- %) ; WVDC: 100 volts ; Mounting Style: Surface Mount Technology.
A5030UA6L : 20 A, SILICON SURGE PROTECTOR, MS-013. s: Thyristor Type: Thyristor Surge Suppressor, SILICON SURGE PROTECTOR ; Package Type: MS-013, 6 PIN ; Pin Count: 6 ; Standards and Certifications: RoHS.
BD539-S : 5 A, 40 V, NPN, Si, POWER TRANSISTOR, TO-220AB. s: Polarity: NPN ; Package Type: TO-220, PLASTIC, TO-220, FM-3.
BLT72 : UHF BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR, MS-012AA. s: Polarity: NPN ; Number of units in IC: 1.
FDS3890F011 : 4.7 A, 80 V, 0.044 ohm, 2 CHANNEL, N-CHANNEL, Si, POWER, MOSFET. s: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 80 volts ; rDS(on): 0.0440 ohms ; PD: 2000 milliwatts ; Package Type: SOIC-8 ; Number of units in IC: 2.
LL4148_R1_10001 : SIGNAL DIODE. s: Diode Type: General Purpose.
T507018034AB : 125 A, 100 V, SCR, TO-83. s: VDRM: 100 volts ; VRRM: 100 volts ; IT(RMS): 125 amps ; IGT: 150 mA ; Package Type: TO-83, 3 PIN ; Pin Count: 2.