|Category||Discrete => Transistors => Composite Transistors|
|Description||Marking = CR ;; V<SUB>CEO</SUB>(V) = 50 ;; V<SUB>CEO</SUB>(Tr2)(V) = ;; I<SUB>C</SUB>(A) = 0.1 ;; I<SUB>C</SUB>(Tr2)(A) = ;; P<SUB>T</SUB>(W) = 0.15 ;; R<SUB>1</SUB>(kW ) = 47 ;; R<SUB>2</SUB>(Tr2)(kW ) = ;; Package = SMini6-G1|
|Company||Panasonic Industrial Company/Electronic Components|
|Datasheet||Download XP06210 datasheet
|Cross ref.||Similar parts: IMH15AT110, RN1973, XP6210|
Two elements incorporated into one package (Transistors with built-in resistor) Reduction of the mounting area and assembly cost by one half
Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Collector current Total power dissipation Junction temperature Storage temperature Symbol VCBO VCEO PT Tj Tstg Rating to +150 Unit mW °C
Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Collector-base cutoff current (Emitter open) Collector-emitter cutoff current (Base open) Emitter-base cutoff current (Collector open) Forward current transfer ratio Collector-emitter saturation voltage Output voltage high-level Output voltage low-level Input resistance Transition frequency Symbol VCBO VCEO ICBO ICEO IEBO hFE VCE(sat) VOH VOL R1 fT VCB = -2 mA, = 200 MHz Conditions = 10 µA, = 2 mA, = 0 VCB = 0 VCE = 0 VEB = 0 VCE = 10 mA, 0.3 mA VCC 1 k VCC 1 k
Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.Note) The part number in the parenthesis shows conventional part number.
Collector output capacitance C (pF) (Common base, input open circuited) ob
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
|Related products with the same datasheet|
|Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components|
|XP06211 Marking = 7Z ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 10 ;; R2(Tr2)(kW|
|XP06212 Marking = 8V ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 22 ;; R2(Tr2)(kW|
|XP06213 Marking = 8W ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 47 ;; R2(Tr2)(kW|
|XP06214 Marking = aa ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 10 ;; R2(Tr2)(kW|
|XP06215 Marking = 8X ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 10 ;; R2(Tr2)(kW|
|XP06216 Marking = 8Y ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 4.7 ;; R2(Tr2)(kW|
|XP06401 Marking = 5O ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = ;; R2(Tr2)(kW ) = ;; Package|
|XP06435 Marking = 7W ;; VCEO(V) = -20 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.03 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = ;; R2(Tr2)(kW ) = ;; Package|
|XP06501 Marking = 5N ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = ;; R2(Tr2)(kW ) = ;; Package|
|XP06534 Marking = 7F ;; VCEO(V) = 20 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.015 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = ;; R2(Tr2)(kW ) = ;; Package|
2N3824 : N-Channel. N-channel Silicon Junction Field-effect Transistor. Reverse Gate Source & Reverse Gate Drain Voltage Continuous Forward Gate Current Continuous Device Power Dissipation Power Derating At 25°C free air temperature: Static Electrical Characteristics Gate Source Breakdown Voltage Gate Reverse Current Gate Source Voltage Gate Source Cutoff Voltage Drain Saturation Current (Pulsed) Drain Cutoff Current Dynamic.
2SA1704 : PNP Epitaxial Planar Silicon Transistor, High-current Driver Application.
2W10GM : Glass Passivated. Pakage = Wob ;; Max. Reverse Voltage VRM (V)= 1000 ;; Max. Aver. Rect. Current io (A)= 2 ;; Ifsm (A)= 50.
DBS151G : Glass Passivated. Pakage = DBS ;; Max. Reverse Voltage VRM (V)= 50 ;; Max. Aver. Rect. Current io (A)= 1.5 ;; Ifsm (A)= 50.
FZT789A/TA : Transistor Sot-223. SOT223 PNP SILICON PLANAR MEDIUM POWER HIGH GAIN TRANSISTOR ISSUE 3 OCTOBER 1995 * Extremely low equivalent on-resistance; RCE(sat) 3A * Gain at IC=2 Amps and very low saturation voltage APPLICATIONS * Battery powered circuits, fast charge converters COMPLEMENTARY TYPE PARTMARKING DETAIL PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base.
IXGP7N60B : Low Voltage < 600 Volts. Hiperfast (tm) Igbt. Symbol VCES VCGR VGES VGEM IC25 IC90 ICM SSOA (RBSOA) PC TJ TJM Tstg Test Conditions to 150°C; RGE 1 M Continuous Transient 1 ms VGE 15 V, TVJ = 22 Clamped inductive load, = 25°C Maximum lead temperature for soldering mm (0.062 in.) from case for s Md Weight Mounting torque, TO-220 TO-263 International standard packages JEDEC TO-263 surface mountable.
MBRS120TR : 20V 1A Schottky Discrete Diode in a SMB Package. IF(AV) Rectangular waveform VRRM IFSM @ tp= 5 µs sine = 125°C range °C The MBRS120 surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery.
MF34-1000 : Fast Recovery Diode. APPLICATIONS s Inverse, Parallel Or Series Connected Diode s Power Supplies s High Frequency Applications s Glass Passivation s High Voltage Capability s Fast Recovery Characteristics Type Number Repetitive Peak Reverse Voltage VRRM V Conditions Lower voltage grades available. For stud anode add suffix 'R' to type number. e.g. MF34-1600R. Outline type.
BC393G4 : 100 mA, 180 V, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-206AA. s: Polarity: PNP ; Package Type: HERMETIC SEALED, METAL, TO-18, 3 PIN.
DHV1420-100 : 1 ELEMENT, 100 uH, GENERAL PURPOSE INDUCTOR. s: Devices in Package: 1 ; Lead Style: Radial, WIRE ; Application: General Purpose ; Inductance Range: 100 microH ; Inductance Tolerance: 10 (+/- %) ; DCR: 0.1400 ohms ; Rated DC Current: 2700 milliamps ; Operating Temperature: -40 to 130 C (-40 to 266 F).
SI-61001 : DATACOM TRANSFORMER FOR GENERAL PURPOSE APPLICATION(S). s: Category: Signal ; Other Transformer Types / Applications: Pulse Transformers, DATACOM TRANSFORMER ; Mounting: Chip Transformer.
SI4090DY-T1-GE3 : SMALL SIGNAL, FET. TrenchFET® Power MOSFET % Rg and UIS Tested Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Top View Ordering Information: Si4090DY-T1-GE3 (Lead (Pb)-free and Halogen-free) S N-Channel MOSFET DC/DC Primary Side Switch Telecom/Server Motor Drive Control Synchronous Rectification ABSOLUTE MAXIMUM.
SK10DGDL12T4ET : 17 A, 1200 V, N-CHANNEL IGBT. s: Polarity: N-Channel ; Package Type: PLASTIC, CASE T 49, SEMITOP-23 ; Number of units in IC: 7.
SSM3J334R : 4000 mA, 30 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET. s: Polarity: P-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 30 volts ; rDS(on): 0.0710 ohms ; Package Type: 2-3Z1A, 3 PIN ; Number of units in IC: 1.
TK8A45D : 8 A, 450 V, 0.9 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220AB. s: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 450 volts ; rDS(on): 0.9000 ohms ; Package Type: TO-220, ROHS COMPLIANT, 2-10U1S, SC-67, TO-220SIS, 3 PIN ; Number of units in IC: 1.
2SK3503-A : 100 mA, 16 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET. s: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 16 volts ; rDS(on): 15 ohms ; Package Type: SC-75, 3 PIN ; Number of units in IC: 1.
5082-0030 : 150 V, SILICON, PIN DIODE. s: Number of Diodes: 1.