Details, datasheet, quote on part number: XP0D874
PartXP0D874
CategoryDiscrete => Transistors => Composite Transistors
TitleComposite Transistors
DescriptionMarking = eq ;; V<SUB>CEO</SUB>(V) = -40 ;; V<SUB>CEO</SUB>(Tr2)(V) = ;; I<SUB>C</SUB>(A) = 1 ;; I<SUB>C</SUB>(Tr2)(A) = ;; P<SUB>T</SUB>(W) = 0.15 ;; R<SUB>1</SUB>(kW ) = ;; R<SUB>2</SUB>(Tr2)(kW ) = ;; Package = SMini5-G1
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload XP0D874 datasheet
Cross ref.Similar parts: XP1D874
  

 

Features, Applications

For low-frequency impedance conversion For infrared sensor s Features

Two elements incorporated into one package Reduction of the mounting area and assembly cost by one half

Parameter Rating of element Gate to drain voltage Gate to source voltage Drain current Gate current Total power dissipation Channel temperature Storage temperature Symbol VGDO VGSO IG PT Tch Tstg Rating to +150 Unit mW C

Parameter Gate to drain voltage Drain current Gate cutoff current Gate to source cutoff voltage Forward transfer admittance Small-signal short-circuit input capacitance Small-signal short-circuit output capacitance Small-signal reverse transfer capacitance Symbol VGDS IDSS IGSS VGSC Yfs Ciss Coss Crss Conditions = -10 A, VDS = 0 VDS 10 V, VGS = 0 VGS -20 V, VDS = 0 VDS 1 A VDS 10 V, VGS = 1 KHz VDS 10 V, VGS = 1 MHz VDS 10 V, VGS = 1 MHz VDS 10 V, VGS = 1 MHz Min Typ Max Unit mS pF

Note) The part number in the parenthesis shows conventional part number.


Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.


 

Related products with the same datasheet
XP1D874
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
XP0E554 Silicon NPN Epitaxial Planer Transistor
XP1110 Marking = ad ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 47 ;; R2(Tr2)(kW
XP1111 Marking = 9S ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 10 ;; R2(Tr2)(kW
XP1112 Marking = 7K ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 22 ;; R2(Tr2)(kW
XP1113 Marking = 7L ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 47 ;; R2(Tr2)(kW
XP1114 Marking = 7Q ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 10 ;; R2(Tr2)(kW
XP1115 Marking = 7M ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 10 ;; R2(Tr2)(kW
XP1116 Marking = 7N ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 4.7 ;; R2(Tr2)(kW
XP1117 Marking = ol ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 22 ;; R2(Tr2)(kW
XP1118 Marking = om ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 0.51 ;; R2(Tr2)(kW
XP1119 Marking = 7P ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 1 ;; R2(Tr2)(kW
XP111F Marking = 7O ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 4.7 ;; R2(Tr2)(kW
XP111H Marking = 9X ;; VCEO(V) = -50 ;; VCEO(Tr2)(V) = ;; IC(A) = -0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 2.2 ;; R2(Tr2)(kW
XP1210 Marking = ac ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 47 ;; R2(Tr2)(kW
XP1211 Marking = 9T ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 10 ;; R2(Tr2)(kW
XP1212 Marking = 9K ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 22 ;; R2(Tr2)(kW
XP1213 Marking = 9L ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 47 ;; R2(Tr2)(kW
XP1214 Marking = 9H ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 10 ;; R2(Tr2)(kW
XP1215 Marking = 9M ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 10 ;; R2(Tr2)(kW
XP1216 Marking = 9N ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 4.7 ;; R2(Tr2)(kW
XP1217 Marking = 9P ;; VCEO(V) = 50 ;; VCEO(Tr2)(V) = ;; IC(A) = 0.1 ;; IC(Tr2)(A) = ;; PT(W) = 0.15 ;; R1(kW ) = 22 ;; R2(Tr2)(kW
Same catergory

2SC5032 : NPN. Silicon NPN Triple Diffusion Planar Type ( For High Breakdown Voltage High-speed Switching ).

BF998W : Silicon N-channel MOSFET Tetrode. ESD: Electrostatic discharge sensitive device, observe handling precaution! Continuos drain current Gate 1/gate 2 peak source current Total power dissipation, 94 C Storage temperature Channel temperature 1For calculation of R thJA please refer to Application Note Thermal Resistance Electrical Characteristics = 25 C; unless otherwise specified. Parameter.

CA3096 : General Purpose. Npn/pnp Transistor Arrays. The CA3096C, CA3096, and CA3096A are general purpose high voltage silicon transistor arrays. Each array consists of five independent transistors (two PNP and three NPN types) on a common substrate, which has a separate connection. Independent connections for each transistor permit maximum flexibility in circuit design. Types CA3096A, CA3096, and CA3096C.

EA20QS06-F : Device = SBD ;; Ripetitive Peak Reverse Voltage(V) = 60 ;; Average Rectified Current(A) = 1.7 ;; Condition(cace or Ambient Temperature) = Tc=135 ;; Surge Forward Current(A) = 40 ;; Maximam Operating Junction Temperature( C ) = 150 ;; Storage Temperature( C ) = -40 to 150 ;; Peak Forward Voltage(V) = 0.58 ;; Peak Forward Current(A) = 1.7 ;; Peak Reverse.

ME700803 : Three-phase Diode Bridge Modules ( 30 Amperes/800 Volts ). Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania (724) 925-7272 : Powerex Three-Phase Diode Bridge Modules are designed for use in three phase bridge applications. The modules are isolated consisting of six rectifier diodes. These ME70 Modules have been tested and recognized by Underwriters Laboratories (QQQX2 Power Switching Semiconductors).

PLA110L : optically isolated. Optically ISOlated Solid State Relay. Small 6 Pin DIP Package Low Drive Power Requirements (TTL/CMOS Compatible) No Moving Parts High Reliability Arc-Free With No Snubbing Circuits 3750VRMS Input/Output Isolation No EMI/RFI Generation Machine Insertable, Wave Solderable Current Limiting, Surface Mount and Tape & Reel Versions Available a 1-Form-A solid state relay which uses optically coupled.

RFD16N02L : 16a, 20v, 0.022 Ohm, N-Channel, Logic Level, Power MOSFET. 20V, 0.022 Ohm, N-Channel, Logic Level, Power MOSFET The RFD16N02L and RFD16N02LSM are N-Channel power MOSFETs manufactured using the MegaFET process. This process, which uses feature sizes approaching those of LSI circuits, gives optimum utilization of silicon, resulting in outstanding performance. They were designed for use in applications such as switching.

TLE5206-2G : Integrated H-Bridges, Iout. Delivers 5 A continuous 6 A peak current Optimized for DC motor management applications Operates at supply voltages 40 V Very low RDS ON; typ. 25 C per switch Output full short circuit protected Overtemperature protection with hysteresis and diagnosis Short circuit diagnosis with open drain error flag Undervoltage lockout CMOS/TTL compatible inputs.

PDU420 : Glass Passivated Die Construction  Ultra-Fast Recovery Time for High Efficiency  High Maximum Junction Temperature  For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications  High Forward Surge Current Capability  Lead Free Finish, RoHS Compliant (Note 1)  "Green" Molding Compound (No Br, Sb)  Qualified.

03028-BR681AKZJ : CAPACITOR, CERAMIC, MULTILAYER, 50 V, BR, 0.00068 uF, SURFACE MOUNT, 0603. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Applications: General Purpose ; Electrostatic Capacitors: Ceramic Composition ; Capacitance Range: 6.80E-4 microF ; Capacitance Tolerance: 10 (+/- %) ; WVDC: 50 volts ; Mounting Style: Surface Mount Technology.

03029-BP390AJZB : CAPACITOR, CERAMIC, MULTILAYER, 50 V, BP, 0.000039 uF, SURFACE MOUNT, 0402. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Dielectric: Ceramic Composition ; Capacitance Range: 3.90E-5 microF ; Capacitance Tolerance: 5 (+/- %) ; WVDC: 50 volts ; Temperature Coefficient: 30 ppm/°C ; Mounting Style: Surface Mount Technology.

AP4439GM9-HF : 13.3 A, 30 V, 0.01 ohm, P-CHANNEL, Si, POWER, MOSFET. s: Polarity: P-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 30 volts ; rDS(on): 0.0100 ohms ; PD: 2500 milliwatts ; Package Type: HALOGEN FREE AND ROHS COMPLIANT, SOP-8 ; Number of units in IC: 1.

AP9620GM-HF : 9.5 A, 20 V, 0.02 ohm, P-CHANNEL, Si, POWER, MOSFET. s: Polarity: P-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 20 volts ; rDS(on): 0.0200 ohms ; PD: 2500 milliwatts ; Package Type: HALOGEN FREE AND ROHS COMPLIANT, SOP-8 ; Number of units in IC: 1.

CN1E2K : RESISTOR, NETWORK, FILM, ISOLATED, SURFACE MOUNT. s: Configuration: Chip Array ; Category / Application: General Use ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), CHIP, ROHS COMPLIANT ; Operating DC Voltage: 25 volts ; Operating Temperature: -55 to 125 C (-67 to 257 F).

DMC206E2 : 2 CHANNEL, VHF BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR. s: Polarity: NPN ; Package Type: HALOGEN FREE AND ROHS COMPLIANT, MINI6-G4-B, 6 PIN ; Number of units in IC: 2 ; Operating Frequency: 650 MHz.

DRA3115T : SMALL SIGNAL TRANSISTOR. s: Package Type: HALOGEN FREE AND ROHS COMPLIANT, SSSMINI3-F2-B, 3 PIN.

M105I152A000 : CAPACITOR, MICA, 1500 V, 1 uF, THROUGH HOLE MOUNT. s: Configuration / Form Factor: Leaded Capacitor ; Applications: General Purpose ; Electrostatic Capacitors: Mica ; Capacitance Range: 1 microF ; Capacitance Tolerance: 3 (+/- %) ; WVDC: 1500 volts ; Mounting Style: Through Hole.

TPCF8108 : 7000 mA, 20 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET. s: Polarity: P-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 20 volts ; rDS(on): 0.0370 ohms ; Package Type: THIN, 2-3U1S, VS-8 ; Number of units in IC: 1.

ZJ1B-B : JUMPER, 0 ohm, THROUGH HOLE MOUNT. s: Category / Application: General Use ; Mounting / Packaging: ThroughHole, Axial Leads, AXIAL LEADED ; Resistance Range: 0.0 ohms ; Operating Temperature: -55 to 155 C (-67 to 311 F).

2N3019DCSMG4 : 1000 mA, 80 V, 2 CHANNEL, NPN, Si, SMALL SIGNAL TRANSISTOR, MO-041BB. s: Polarity: NPN ; Package Type: HERMETIC SEALED, CERAMIC, LCC2-6.

 
0-C     D-L     M-R     S-Z