Details, datasheet, quote on part number: PI5A100
PartPI5A100
CategoryAnalog & Mixed-Signal Processing => Switches & Multiplexers => Analog Switches
DescriptionSingle Supply, High Speed, Quad SPDT CMOS Analog Switch W/master Enable
CompanyPericom Semiconductor Corporation
DatasheetDownload PI5A100 datasheet
Cross ref.Similar parts: ADG774, ISL43240IRZ, ISL43240IR, MAX4674
Quote
Find where to buy
 
  

 

Features, Applications

PI5A100 Precision, Wide Bandwidth Quad SPDT Analog Switch

Single Supply Operation to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6 Ohm typ with 5V supply) Minimizes Distortion and Error Voltages On-Resistance Matching Between Channels, 0.4 Ohm Typ. On-Resistance Flatness, <2 Ohm Typ. Low Charge Injection Reduces Glitch Errors, = 6pC Typ. Replaces Mechanical Relays High Speed. tON, 8ns Typ. Low Crosstalk: @ 10 MHz Low Off-Isolation: @ 10 MHz Wide -3dB Bandwidth: 230 MHz High-Current Channel Capability: >100mA TTL/CMOS Logic Compatible Low Power Consumption (0.5W typ.) Packaging: 16-pin QSOP (Q16), and 16-pin SOIC (W16)

Description

The is an improved Quad Single-pole double-throw (4SPDT) CMOS analog switch designed to operate with a single to +6V power supply. The EN pin may be used to place all switches in a high-impedance state. This high precision device is ideal for low-distortion audio, video, and data switching and routing. Each switch conducts current equally well in either direction when on. In the off state each switch blocks voltages up to the powersupply rails. The PI5A100 is fully specified with +5V, and +3.3V supplies. With +5V, it guarantees less than 10 Ohm On-resistance. On-resistance matching between channels is within 2 Ohm. On-resistance flatness is less than 4 Ohm over the specified range. The PI5A100 guarantees fast switching speeds (tON < 12ns). The PI5A100 is available in the narrow-body SOIC-16, and QSOP16 packages for operation over the industrial to +85C) temperature range.

Applications
Audio, Video Switching and Routing LAN Switches Telecommunication Systems Battery-Powered Systems
Functional Block Diagram, Pin Configuration and Truth Table
Switches shown for logic "0" input. NC = Normally Closed; NO = Normally Open
For free samples and the latest literature: www.pericom.com, or phone 1-800-435-2336

PI5A100 Precision, Wide Bandwidth, Quad SPDT Analog Switch 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012

Voltages Referenced to Gnd VCC................................................................................................. to +7V VIN, VCOM, VNC, VNO (Note -0.5V to Vcc +2V.................................................or 30mA, whichever occurs first Current (any terminal except COM,NO,NC).......................30mA Current, COM, NO, NC (pulsed 1ms, 10% duty cycle)...................................... 120mA

Continuous Power Dissipation Narrow SO & QSOP (derate 8.7mW/C above +70C). 650mW Storage Temperature. to +150C Lead Temperature (soldering, 10s). +300C Note 1: Signals on NC, NO, COM, or IN exceeding Vcc or Gnd are clamped by internal diodes. Limit forward diode current to 30mA.

Caution: Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied.

Conditions Analog Switch Analog Switch Range( 3 ) On- Resistance On- ResistanceMatch Between Channels 6 ) On- ResistanceFlatness( or NC Off Leakage Current( 6 ) COM Off Leakage Current( 6 ) COM On Leakage Current( ) VA RON VCC = 4.5V, ICOM - 30mA, VNO or VNC = +2.5V RON VCC = 5V, ICOM - 30mA, VNO or VNC 2.5V, 4V VCC = 5.5V, ICOM = 0V, VNO or VNC = 5.5V, ICOM = +4.5V, VNO or VNC = 5.5V, ICOM = +4.5V, VNO or VNC = +4.5V Full 25 Full 25 Full 25 Full 25 Full 25 Full 25 Full nA VCC Te mp (C) M in( 1 ) Typ( 1 ) Units

Parame te r Logic Input High Voltage Input Low Voltage Input Current with Input Voltage High Input Current with Input Voltage Low Dynamic Turn- On Time tON VCC = 5V, Figure 1 Turn- Off Time Charge Injection (3) Off Isolation Crosstalk

Guaranteed logic High Level Full Guaranteed logic Low Level VIN = 2.4V, all others = 0.8V Full VIN = 0.8V, all others = 2.4V

25 Full 25 Full CL=1nF, VGEN = 0V, RGEN = 0 ohm, Figure = 50 ohm, CL= = 10MHz, Figure = 50 ohm, CL= = 10MHz, Figure Figure5 25

tOFF Q OIRR XTALK C(OFF) CCOM(OFF) CCOM(ON) f =1kHz, Figure = 50 ohm, Figure = 10k- ohm,

or NO Capacitance COM Off Capacitance COM On Capacitance - 3dB Bandwidth Distortion Supply Power- Supply Range Positive Supply Current

Notes: 1. The algebraic convention, where the most negative value is a minimum and the most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design = R max - R min 5. Flatness is defined as the difference between the maximum and minimum value of on-resistance measured. 6. Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation +25C. 7. Off Isolation 20log10 [ VCOM / (VNO or VNC) See figure 3. 8. Between any two switches. See figure 4.


 

Related products with the same datasheet
PI5A100Q
PI5A100W
Some Part number from the same manufacture Pericom Semiconductor Corporation
PI5A100Q Single Supply, High Speed, Quad SPDT CMOS Analog Switch W/master Enable
PI5A101 Single Supply, Quad SPST Analog Switch (NC)
PI5A121 High Speed SPST Analog Switch W/compact Packages
PI5A125 Single Wide Bandwidth Analog Switch
PI5A126 High Speed Dual SPST Analog Switch
PI5A3157 Sotiny Single SPDT Mux/demux Switch
PI5A3158 Sotiny Dual SPDT Mux/demux Switch
PI5A3159 Sotiny 1 Ohm, Low-Voltage, SPDT Analog Switch (3157 Pinout)
PI5A317A High Speed, Single Supply SPST Switch
PI5A318A
PI5A318AP Precision Wide Bandwidth Analog Switch
PI5A318AW
PI5A319A High Speed, Single Supply SPST Switch
PI5A381A Precision Wide Bandwidth Analog Switches
PI5A383A High Speed, Single Supply Dual SPDT Switch
PI5A385A Precision Wide Bandwidth Analog Switch
PI5A391A 7V Quad SPST
PI5A4594A Sotiny Low-Voltage, Single-Supply, 8-Ohm SPST CMOS Analog Switches
PI5A4599A Sotiny Single SPDT Mux/demux Switch
PI5A4624 Sotiny 1 Ohm, Low-Voltage, Single-supply SPDT Switch (Break-Before-Make)
PI5A4626 Sotiny 1 Ohm, Low-Voltage, Single-supply SPST Switch
Same catergory

AD5220 : Increment/decrement Digital Potentiometer. 128 Position Potentiometer Replacement 100 k Very Low Power: 40 A Max Increment/Decrement Count Control APPLICATIONS Mechanical Potentiometer Replacement Remote Incremental Adjustment Applications Instrumentation: Gain, Offset Adjustment Programmable Voltage-to-Current Conversion Programmable Filters, Delays, Time Constants Line Impedance Matching Power.

AD8610 : Precision Very Low Noise Low Input Bias Current Wide Bandwith JFET Operational Amplifier.

AN2110S : Video Camera Signal Processing Circuit.

BQ2014H : Gas Gauge ic With External Charge Control. Accurate measurement of available capacity in NiCd or NiMH batteries Low-cost battery management solution for pack integration N iM Gauge IC is intended for batterypack or in-system installation to maintain an accurate record of available battery capacity. The IC monitors a voltage drop across a sense resistor connected in series between the negative.

INA148UA : Difference Amplifiers. ti INA148, +-200V Common-mode Voltage Difference Amplifier.

LM101AU : High-performance Operational Amplifiers. Low Input Currents Low Input Offset Parameters Frequency and Transient Response Characteristics Adjustable Short-Circuit Protection Offset-Voltage Null Capability No Latch-Up Wide Common-Mode and Differential Voltage Ranges Same Pin Assignments as uA709 Designed to be Interchangeable with National Semiconductor LM101A and LM301A The LM101A, LM201A,.

LM293AP : Dual Differential Comparators. Single Supply or Dual Supplies Wide Range of Supply Voltage. 36 V Low Supply-Current Drain Independent of Supply Voltage. 0.4 mA Typ Per Comparator Low Input Bias Current. 25 nA Typ Low Input Offset Current. 3 nA Typ (LM193) Low Input Offset Voltage. 2 mV Typ Common-Mode Input Voltage Range Includes Ground Differential Input Voltage Range Equal to Maximum-Rated.

LM9811 : 10-bit Greyscale/30-bit Color Linear CCD Sensor Processor (obsolete). The is a high performance integrated signal processor/digitizer for linear CCD image scanners. The LM9811 performs all the analog processing (correlated double sampling for black level and offset compensation, pixel-by-pixel gain (shading) correction, and 10-bit analog-to-digital conversion) necessary to maximize the performance of a wide range of linear.

LT1057S : Dual. Dual JFET Input Precision High Speed op Amp.

M52756SP : Wide Band Analog Switch. The is a semiconductor integrated circuit for the RGBHV interface. The device switching signals input from two types of image sources and outputting the signals to the CRT display, etc. Synchronous signals, meeting a frequency band to 200kHz, are output at TTL. The frequency band of video signals is 250MHz, acquiring highresolution images, and are optimum.

MAX4376 : Single/dual/quad High-side Current-sense Amplifiers With Internal Gain.

MAX9686 : Single/Dual, Very Fast TTL Latched Output Comparators.

OP90 : Precision, Low-Voltage, Micropower op Amp.

PPG36F : 6-bit Programmable Pulse Generator. Digitally programmable in 64 steps Monotonic pulse-width-vs-address variation Rising edge triggered Two separate outputs: inverting & non-inverting Precise and stable pulse width Input & outputs fully TTL interfaced & buffered T L fan-out capability Fits standard 24-pin DIP socket Auto-insertable The PPG36F-series device a 6-bit digitally programmable.

SAA7284 : SAA7284; Terrestrial Digital Sound Decoder For Conventional Intercarrier Pll-if Systems.

SAP15N : Darlington Transistors With Built-in Temperature Compensation Diodes For Audio Amplifier Applications.

TL601 : SPDT. P-mos Analog Switches. Switch 10-V Analog Signals TTL Logic Capability 5-to 30-V Supply Ranges Low (100 ) On-State Resistance High (1011 ) Off-State Resistance 8-Pin Functions The TL604, TL607, and TL610 are a family of monolithic P-MOS analog switches that provide fast switching speeds with high roff/ron ratio and no offset voltage. The p-channel enhancement-type MOS switches.

TL712D : Differential Comparator. Operates From a Single 5-V Supply 5 V Common-Mode Input Voltage Range Self-Biased Inputs Complementary 3-State Outputs Enable Capability Hysteresis. 5 mV Typ Response Times. 25 ns Typ The is a high-speed comparator fabricated with bipolar Schottky process technology. The circuit has differential analog inputs and complementary 3-state TTL-compatible.

TLV2434A : Advanced Lincmos(tm) Rail-to-rail Output Wide-input-voltage op Amps. TLV2434, TLV2434A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS Output Swing Includes Both Supply Rails Extended Common-Mode Input Voltage Range. 4.5 V (Min) with 5-V Single Supply No Phase Inversion Low Noise. 18 nV/Hz Typ = 1 kHz Low Input Offset Voltage 950 V Max 25C (TLV243xA) Low Input Bias Current. 1 pA Typ Very.

HMC-C035 : GaAs MMIC DOUBLE BALANCED MIXER MODULE, 23 - 37 GHz The HMC-C035 is a general purpose double-balanced mixer housed in a miniature hermetic module which can be used as an upconverter or downconverter between 23 and 37 GHz. This mixer requires no external components or matching circuitry. The HMCC035 provides excellent, LO to RF, and LO to IF suppression.

 
0-C     D-L     M-R     S-Z