Details, datasheet, quote on part number: PI5A127
PartPI5A127
CategoryAnalog & Mixed-Signal Processing => Switches & Multiplexers => Analog Switches
DescriptionHigh Speed Dual SPST Analog Switch
CompanyPericom Semiconductor Corporation
DatasheetDownload PI5A127 datasheet
Cross ref.Similar parts: ADG722, MAX4642
Quote
Find where to buy
 
  

 

Features, Applications

Features

Single-Supply Operation to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (7.2-Ohms with 5V supply) Minimizes Distortion and Error Voltages On-Resistance Flatness, 3Ohm typ. Low Charge Injection Reduces Glitch Errors. = 1.6pC typ. High Speed. tON = 7ns typ. Wide 3dB Bandwidth: 326 MHz High-Current Channel Capability: >100mA TTL/CMOS Logic Compatible Low Power Consumption (5W typ.) Small MSOP-8 package minimizes board area

Description

The PI5A126/PI5A127 are dual SPST (single-pole single-throw) analog switches designed for single supply operation. These high-precision devices are ideal for low-distortion audio, video, signal switching and routing. The is a normally open (NO) switch. The switch is open when IN is LOW. The is a normally closed (NC) switch. Each switch conducts current equally well in either direction when on. When off, they block voltages up to V+. These switches are fully specified with +5V and +3.3V supplies. With +5V, they guarantee <10 -ohm ON-resistance. On-resistance matching between channels is within 2 ohms. On-resistance flatness is less than 5 ohms over the specified range. These switches also guarantee fast switching speeds (tON < 20ns). These products are available in 8-pin SOIC and MSOP plastic packages for operation over the industrial temperature range to +85oC).

Applications

Audio, Video Switching and Routing Battery-Powered Communication Systems Computer Peripherals Telecommunications Portable Instrumentation Mechanical Relay Replacement Cell Phones PDAs

Voltages Referenced to GND V+............................................................................................. to +7V VIN, VCOM, VNC, VNO (Note or 30mA, whichever occurs first Current (any terminal except COM,NO,NC)........................ 30mA Current, COM, NO, NC......................................................100mA (Pulsed 1ms, 10% duty cycle)........................................ 120mA

Continuous Power Dissipation -6 (derate 7mW/C above +70C)........................................ 550mW Storage Temperature......................................... to +150C Lead Temperature (soldering, 10s).................................. +300C Note 1: Signals on NC, NO, COM, or IN exceeding V+ or GND are clamped by internal diodes. Limit forward diode current to 30mA.

Caution: Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied.

Parame te r Analog Switch Analog Signal Range(3) On Resistance On- Resistance Match Between Channels(4) On- Resistance or NC Off Leakage Current(6) COM Off Leakage Current(6) COM On Leakage Current(6) VANALOG RON Symbol

Full = 4.5V, ICOM = 30mA, VNO or VNC = +2.5V Full 25 Full = 5V, ICOM 30mA, or VNC 4V 25 Full 25 Full 25 Full 25 Full

Electrical Specifications - Single +5V Supply (continued) (V+ 5V 10%, GND = 0V, VINH = 2.4V, VINL = 0.8V)

Parame te r Logic Input High Voltage Input Low Voltage Input Current with Voltage High Input Current with Voltage Low Dynamic Turn- On Time tON VCC = 5V, Figure 1 Turn- Off Time Charge Injection(3) Off Isolation Crosstalk or NO Capacitance COM Off Capacitance COM On Capacitance - 3dB Bandwidth Distortion Supply Power- Supply Range Positve Supply Current = 5.5V, VIN 0V or VCC, V+ All Channels on or off Full A tOFF Q OIRR Xtalk C(off) Ccom(off) Ccom(on) = 1nF, Vgen = 0V, Rgen = 0, Figure = 10MHz, Figure = 10 MHz, Figure = 1kHz, Figure = 1kHz, Figure = 50, Figure = 10 Full 25 Full 25 Full 3 dB MHz pC ns VIH VIL IINH IINL Guaranteed logic High Level Guaranteed logic Low Level VIN = 2.4V, all others = 0.8V VIN = 0.8V, all others = 2.4V Full V Symbol Conditions Te mp(C) M ax.(1) Units

Notes: 1. The algebraic convention, where the most negative value is a minimum and the most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design 4. RON = RON max - RON min. 5. Flatness is defined as the difference between the maximum and minimum value of ON-resistance measured. 6. Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation +25C. 7. Off Isolation 20log10 [ VCOM / (VNO or VNC) See Figure 3.


 

Related products with the same datasheet
PI5A126UX
PI5A126W
PI5A127UX
PI5A127W
Some Part number from the same manufacture Pericom Semiconductor Corporation
PI5A127UX High Speed Dual SPST Analog Switch
PI5A3157 Sotiny Single SPDT Mux/demux Switch
PI5A3158 Sotiny Dual SPDT Mux/demux Switch
PI5A3159 Sotiny 1 Ohm, Low-Voltage, SPDT Analog Switch (3157 Pinout)
PI5A317A High Speed, Single Supply SPST Switch
PI5A318A
PI5A318AP Precision Wide Bandwidth Analog Switch
PI5A318AW
PI5A319A High Speed, Single Supply SPST Switch
PI5A381A Precision Wide Bandwidth Analog Switches
PI5A383A High Speed, Single Supply Dual SPDT Switch
PI5A385A Precision Wide Bandwidth Analog Switch
PI5A391A 7V Quad SPST
PI5A4594A Sotiny Low-Voltage, Single-Supply, 8-Ohm SPST CMOS Analog Switches
PI5A4599A Sotiny Single SPDT Mux/demux Switch
PI5A4624 Sotiny 1 Ohm, Low-Voltage, Single-supply SPDT Switch (Break-Before-Make)
PI5A4626 Sotiny 1 Ohm, Low-Voltage, Single-supply SPST Switch
PI5C16209 18-Bit Bus Exchange Switch
PI5C16210 20-Bit Bus Switch
PI5C16211 24-Bit Bus Switch
PI5C16212 24-Bit Bus Exchange Switch
 
0-C     D-L     M-R     S-Z