Details, datasheet, quote on part number: PI5A4599A
CategoryAnalog & Mixed-Signal Processing => Switches & Multiplexers => Analog Switches
DescriptionSotiny Single SPDT Mux/demux Switch
CompanyPericom Semiconductor Corporation
DatasheetDownload PI5A4599A datasheet
Cross ref.Similar parts: ADG749, ISL43210IHZ-T, FSA4157P6X, ISL43210IH-T, DG9411, MAX4599
Find where to buy


Features, Applications

SOTINYTM Low Resistance, Low-Voltage Single-Supply SPDT Switch

Low On-Resistance: 10 ohms max. RON Matching: 2 ohms max. RON Flatness: 3.5 ohms max. Low 0.5nA Input Leakage to 6V Single-Supply Operation Fast Switching Time - 15ns tON - 7ns tOFF Break-Before-Make Switching Guaranteed 5pC max Charge Injection 225MHz Channel Bandwidth 76dB Off-Isolation at 1MHz TTL/CMOS Logic Compatible Low Power Consumption: 5W Improved Direct Replacement for MAX4599 Packages (Pb-free available for SC-70 only): 6-pin Small Compact & SOT-23


The is an improved, direct replacement for the MAX4599 single-pole, double-throw (SPDT) analog switch. Improved specifications include a low maximum ON resistance of 10 ohms and fast switching times (tON = 15ns max., tOFF = 7ns max.) with 5V supply operation. With a 2.5V supply, resistance is a low 40 ohms max. Specifications are given for 2.5V, 3.3V and 5V power supply operation. Operating voltage range 6.0V. To minimize PC board area use, the PI5A4599A is available in a compact 6-pin SC70 package. Operating temperature range to 85C.


Communication Circuits Cellular Phones Audio and Video Signal Routing Portable Battery-Operated Equipment Data Acquisition Systems Computer Peripherals Telecommunications Relay Replacement Wireless Terminals and Peripherals

PI5A4599A SOTINY Low Resistance, Low -Voltage Single-Supply SPDT Switch 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012

Voltages Referenced to GND V+........................................................................... to +7V VIN, VCOM, VNC, VNO (Note 0.5V to VCC or 30mA, whichever occurs first Current (any terminal)..................................................... 30mA Peak Current, COM, NO, NC (Pulsed 1ms, 10% duty cycle)..................................... 30mA

Continuous Power Dissipation SC70-6 (derate 3.1mW/C above +70C)............................. 245mW Storage Temperature......................................... to +150C Lead Temperature (soldering, 10s).................................. +300C Note: 1. Signals on NC, NO, COM, or IN exceeding V+ or Gnd are clamped by internal diodes. Limit forward diode current to 30mA.

Caution: Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied.

Parame te r Analog Switch Analog Signal Range(3) On Resistance On- Resistance Match Between Channels(4) On- Resistance or NC Off Leakage Current(6) COM Off Leakage Current(6) COM On Leakage Current(6) VANALOG RON Full = 4.5V, ICOM - 30mA, VNO or VNC = 5V, ICOM - 30mA, VNO or VNC = 5.5V, VCOM = 0V, VNO or VNC = 5.5V, VCOM + 4.5V, VNO or VNC 5.5V , VCOM = +4.5V VNO or VNC = +4.5V Full 25 Full 25 Full 25 Full 25 Full 25 Full V+ nA ohm V Symbol Conditions Te mp.(C) M ax.(1) Units

PI5A4599A SOTINYTM Low Resistance, Low -Voltage Single-Supply SPDT Switch 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Electrical Specifications - Single +5V Supply (continued)

Parame te r Logic Input High Voltage Input Low Voltage Input Current with Voltage High Input Current with Voltage Low Dynamic Turn- On Time Turn- Off Time Break- Before- Make Charge Injection(3) Off Isolation or NO Capacitance COM Off Capacitance COM On Capacitance 3dB Bandwidth Supply Power- Supply Range Positve Supply Current

Conditions Guaranteed logic High Level Guaranteed logic Low Level VIN = 2.4V, all others = 0.8V VIN = 0.8V, all others = 2.4V

tON VCC = 5V, Figure 1 tOFF tBBM Q OIRR XTALK C(OFF) CCOM(OFF) CCOM(ON) V+ I+ VCC = 5.5V, VIN or V+ Figure = 1nF, VGEN = 0V, RGEN = 0 ohm, Figure = 50 ohms, = 1MHz, Figure = 50 ohms, = 1MHz, Figure = 1MHz, Figure = 1MHz, Figure = 50 ohms, Figure 8

Notes: 1. The algebraic convention, where most negative value is a minimum and most positive is a maximum, is used in this data sheet. 2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing. 3. Guaranteed by design. 4. RON = RON max. - RON min. 5. Flatness is defined as the difference between the maximum and minimum value of On-resistance measured. 6. Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation +25C. 7. Off Isolation 20log10 [ VCOM / (VNO or VNC) See Figure 3. 8. Between any two switches. See Figure 4.


Related products with the same datasheet
Some Part number from the same manufacture Pericom Semiconductor Corporation
PI5A4599ACEX Sotiny Single SPDT Mux/demux Switch
PI5A4624 Sotiny 1 Ohm, Low-Voltage, Single-supply SPDT Switch (Break-Before-Make)
PI5A4626 Sotiny 1 Ohm, Low-Voltage, Single-supply SPST Switch
PI5C16209 18-Bit Bus Exchange Switch
PI5C16210 20-Bit Bus Switch
PI5C16211 24-Bit Bus Switch
PI5C16212 24-Bit Bus Exchange Switch
PI5C16213 24-bit Bus-exchange Switch
PI5C16214 Pi5c162214 (25ohm)
PI5C16215C 20-Bit Bus Switch W/undershoot Protection
PI5C162209 18-bit Bus Exchange Switch
PI5C162210 20-bit, 2-port Bus Switch
PI5C162212 24-bit Bus Exchange Switch
PI5C162214 12-bit, 3-to-1 Bus-select Switch
PI5C162215CA 20-bit,hot Insertion,bus Switch With Precharged Outputs & Undershoot Protection
PI5C162244 16-Bit Bus Switch W/25 Ohm Resistor (FCT16244 Pinout)
PI5C162245 16-Bit Bus Switch W/25 Ohm Resistor (FCT16245 Pinout)
PI5C16225C Low Capacitance 12-bit-to-24-bit Mux/demux Bus Switch
Same catergory

81023062A : ti TL074, Quad Low-noise JFET-input General-purpose Operational Amplifier.

HS-1120RH : Radiation Hardened, Ultra High Speed Current Feedback Amplifier With Offset Adjust.

KSC1188 : NPN ( TV Pif Amplifier ).

LA7051 : Video, Audio Signal Processor For UHF Band RF Modulator. Video, Audio Signal Processor for UHF Band RF Modulator The is a video, audio signal processor IC for UHF unit: mm band RF modulator. It performs the functions of audio FM 3017C-SIP9 modulator, video clamp circuit, white clip circuit. Applications 5.5MHz/6.0MHz audio modulation frequency selectable with control pin. Contains white clip circuit. Minimum.

LT1122 : LT1122, Fast Setting, JFET Input Operational Amplifier. LT1122 Fast Settling, JFET Input Operational Amplifier 100% Tested Settling Time 1mV at Sum Node, 10V Step Tested with Fixed Feedback Capacitor Slew Rate Gain Bandwidth Product Power Bandwidth (20Vp-p) Unity Gain Stable; Phase Margin Input Offset Voltage Input Bias Current 25C 70C Input Offset Current 25C 70C Low Distortion The LT1122 JFET input.

MAX2402 : 800mhz to 1000mhz Transmitter. The MAX2402 transmitter integrates a double-balanced mixer, buffered local oscillator (LO) port, variable gain stage, and power amplifier into a single IC. It is intended for use in the to 1000MHz band, and is compatible with both direct-sequence and frequencyhopping spread-spectrum designs in the to 928MHz ISM band. In a typical application, a digital.

MAX4295 : Mono/Stereo, 2W, Switch-mode (Class-D) Audio Power Amplifiers. Mono/Stereo 2W Switch-Mode (Class-D) Audio Power Amplifiers The MAX4295/MAX4297 mono/stereo, switch-mode (Class-D) audio power amplifiers operate from a single to +5.5V supply. They have >85% efficiency and are capable of delivering 2W continuous power a 4 load, making them ideal for portable multimedia and general-purpose high-power audio applications.

MAX454C/D : CMOS Video Multiplexer/amplifier.

MAX4785 : MAX4785, MAX4786, MAX4787, MAX4788 50mA/100mA Current-limit Switches. The MAX4785MAX4788 family of switches feature internal current limiting to prevent host devices from being damaged due to faulty load conditions. These analog switches have a low 0.7 on-resistance and operate from to 5.5V input voltage range. They are available with guaranteed 50mA and 100mA current limits, making them ideal for load-switching applications.

MSA-0700 : Cascadable Silicon Bipolar Mmic Amplifiers. Cascadable Silicon Bipolar MMIC Amplifiers Technical Data Cascadable 50 Gain Block Low Operating Voltage: 4.0 V Typical Vd 3 dB Bandwidth: to 2.5 GHz 13.0 dB Typical Gain at 1.0 GHz The is a high performance silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) chip. This MMIC is designed for use as a general purpose 50 gain block. Typical.

TBA120U : Sound I.F. Amplifier/demodulator For TV. Product File under Integrated Circuits, IC02 March 1986 The is an i.f. amplifier with a symmetrical FM demodulator and an a.f. amplifier with adjustable output voltage. The a.f. amplifier is also provided with an output for volume control and an input for VCR operation. The input and output of the TBA120U are especially designed for LC-circuits, but the input.

TL3472CD : ti TL3472, High-Slew-Rate, Single-supply Operational Amplifier. Wide Gain-Bandwidth Product. 4 MHz High Slew Rate. 13 V/s Fast Settling Time. to 0.1% Wide-Range Single-Supply Operation. 36 V Wide Input Common-Mode Range Includes Ground (VCC) Low Total Harmonic Distortion. 0.02% Large-Capacitance Drive Capability. 10,000 pF Output Short-Circuit Protection Quality, low-cost, bipolar fabrication with innovative design.

TLV2422QDRQ1 : ti TLV2422-Q1, Advanced Lincoms Rail-to-rail Output Wide-input-volt. TLV2422Q1, TLV2422AQ1 Advanced LinCMOS RAILTORAIL OUTPUT WIDEINPUTVOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS AEC-Q100 Qualified for Automotive Applications Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model = 200 pF, = 0) Output.

TPS3836K33 : Power. D Supply Current 220 nA (Typ) D Precision Supply Voltage Supervision Applications Using Low-Power DSPs, Microcontrollers, or Microprocessors Portable/Battery-Powered Equipment Intelligent Instruments Wireless Communication Systems Notebook Computers Automotive Systems Applications Using the MSP430 Delay Time 200 ms Push/Pull RESET Output.

DG9051 : Precision 8-Ch/Dual 4-Ch/Triple 2-Ch Low Voltage Analog Switches/Multiplexers The DG9051/9052/9053 are low-voltage monolithic CMOS analog switches and multiplexers. DG9051 is an 8-channel multiplexer; DG9052 is a dual 4-channel multiplexer; and DG9053 is a triple single-pole/double throw (SPDT) switch. They are designed to operate from a +2.7 to +12-V.

HMC676LP3E : Latched Comparator With RSCML Output Stage SMT, 10 GHz The HMC676LP3E is a SiGe monolithic, ultra fast comparator which reduced swing ECL output drivers and latch inputs. The comparator supports 10 Gbps operation while providing 100 ps propagation delay and 60 ps minimum pulse width with 0.2 ps rms random jitter (RJ). Overdrive and slew rate dispersion.

SM73307 : Dual Precision, 17 MHz, Low Noise, CMOS Input Amplifier The SM73307 is a dual, low noise, low offset, CMOS input, rail-to-rail output precision amplifier with a high gain bandwidth product. The SM73307 is ideal for a variety of instrumentation applications including solar photovoltaic. Utilizing a CMOS input stage, the SM73307 achieves an input bias.

0-C     D-L     M-R     S-Z