|
Details, datasheet, quote on part number:2N4124
| |
| Part: | 2N4124 |
| Category: | Discrete => Transistors => Bipolar => General Purpose => NPN => Amplifier |
| Description: | 2N4124; NPN General Purpose Transistor |
| Company: | Philips Semiconductors |
| Datasheet: | Download 2N4124 datasheet File size : 50 kB |
| Request For quote: | Find where to buy 2N4124
|
| |
Datasheet text preview:
DISCRETE SEMICONDUCTORS
DATA SHEET
book, halfpage
M3D186
2N4124 NPN general purpose transistor
Product specification Supersedes data of September 1994 File under Discrete Semiconductors, SC04 1997 Mar 25
Philips Semiconductors
Product specification
NPN general purpose transistor
FEATURES · Low current (max. 200 mA) · Low voltage (max. 25 V). APPLICATIONS · General purpose switching and amplification, e.g. small-signal audio-frequency applications.
1 handbook, halfpage
2N4124
PINNING PIN 1 2 3 collector base emitter DESCRIPTION
DESCRIPTION NPN transistor in a TO-92; SOT54 plastic package. PNP complement: 2N4126.
2 3
1 2 3
MAM279
Fig.1
Simplified outline (TO-92; SOT54) and symbol.
QUICK REFERENCE DATA SYMBOL VCBO VCEO ICM Ptot hFE fT PARAMETER collector-base voltage collector-emitter voltage peak collector current total power dissipation DC current gain transition frequency Tamb 25 °C IC = 2 mA; VCE = 1 V IC = 10 mA; VCE = 20 V; f = 100 MHz open base CONDITIONS open emitter - - - 120 300 MIN. MAX. 30 25 300 500 360 - MHz V V mA mW UNIT
1997 Mar 25
2
Philips Semiconductors
Product specification
NPN general purpose transistor
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VCBO VCEO VEBO IC ICM IBM Ptot Tstg Tj Tamb Note 1. Transistor mounted on an FR4 printed-circuit board. THERMAL CHARACTERISTICS SYMBOL Rth j-a Note 1. Transistor mounted on an FR4 printed-circuit board. CHARACTERISTICS Tamb = 25 °C unless otherwise specified. SYMBOL ICBO IEBO hFE VCEsat VBEsat Cc Ce fT F Note 1. Pulse test: tp 300 µs; 0.02. PARAMETER collector cut-off current emitter cut-off current DC current gain collector-emitter saturation voltage base-emitter saturation voltage collector capacitance emitter capacitance transition frequency noise figure CONDITIONS IE = 0; VCB = 20 V IC = 0; VEB = 3 V IC = 2 mA; VCE = 1 V; note 1 IC = 50 mA; VCE = 1 V; note 1 IC = 50 mA; IB = 5 mA; note 1 IC = 50 mA; IB = 5 mA; note 1 IE = ie = 0; VCB = 5 V; f = 1 MHz IC = ic = 0; VEB = 0.5 V; f = 1 MHz IC = 10 mA; VCE = 20 V; f = 100 MHz IC = 100 µA; VCE = 5 V; RS = 1 k f = 10 Hz to 15.7 kHz - - 120 60 - - - - 300 - MIN. PARAMETER thermal resistance from junction to ambient note 1 CONDITIONS VALUE 250 PARAMETER collector-base voltage collector-emitter voltage emitter-base voltage collector current (DC) peak collector current peak base current total power dissipation storage temperature junction temperature operating ambient temperature Tamb 25 °C; note 1 open base open collector CONDITIONS open emitter - - - - - - - -65 - -65 MIN.
2N4124
MAX. 30 25 5 200 300 100 500 +150 150 +150
UNIT V V V mA mA mA mW °C °C °C
UNIT K/W
MAX. 50 50 360 - 300 950 4 8 - 5
UNIT nA nA
mV mV pF pF MHz dB
1997 Mar 25
3
Philips Semiconductors
Product specification
NPN general purpose transistor
PACKAGE OUTLINE Plastic single-ended leaded (through hole) package; 3 leads
2N4124
SOT54
c
E d A L b
1
D
2
e1 e
3
b1
L1
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54 REFERENCES IEC JEDEC TO-92 EIAJ SC-43 EUROPEAN PROJECTION ISSUE DATE 97-02-28 A 5.2 5.0 b 0.48 0.40 b1 0.66 0.56 c 0.45 0.40 D 4.8 4.4 d 1.7 1.4 E 4.2 3.6 e 2.54 e1 1.27 L 14.5 12.7 L1(1) 2.5
1997 Mar 25
4
Philips Semiconductors
Product specification
NPN general purpose transistor
DEFINITIONS Data Sheet Status Objective specification Preliminary specification Product specification Limiting values
2N4124
This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications.
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
1997 Mar 25
5
|
|
