|
|
Part: 2PA1015Y
Category:
Discrete
-> Transistors
-> Bipolar
-> General Purpose
Description: 2PA1015; PNP General Purpose Transistor;; Package: SOT54 (SPT, E-1)
Company: Philips Semiconductors
Datasheet: Download 2PA1015Y datasheet File size : 278 kB
Request For quote: Find where to buy 2PA1015Y
Datasheet text preview:
DISCRETE SEMICONDUCTORS
DATA SHEET
book, halfpage
M3D186
2PA1015 PNP general purpose transistor
Product specification Supersedes data of 1997 May 01 1999 Apr 08
Philips Semiconductors
Product specification
PNP general purpose transistor
FEATURES · Low current (max. 150 mA) · Low voltage (max. 50 V). APPLICATIONS · General purpose switching and amplification. DESCRIPTION PNP transistor in a plastic TO-92; SOT54 package. NPN complement: 2PC1815.
1 handbook, halfpage
2PA1015
PINNING PIN 1 2 3 base collector emitter DESCRIPTION
2 3
2 1 3
MAM285
Fig.1
Simplified outline (TO-92; SOT54) and symbol.
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VCBO VCEO VEBO IC ICM IBM Ptot Tstg Tj Tamb Note 1. Transistor mounted on an FR4 printed-circuit board. PARAMETER collector-base voltage collector-emitter voltage emitter-base voltage collector current (DC) peak collector current peak base current total power dissipation storage temperature junction temperature operating ambient temperature Tamb 25 °C; note 1 CONDITIONS open emitter open base open collector - - - - - - - -65 - -65 MIN. MAX. -50 -50 -5 -150 -200 -200 500 +150 150 +150 V V V mA mA mA mW °C °C °C UNIT
1999 Apr 08
2
Philips Semiconductors
Product specification
PNP general purpose transistor
THERMAL CHARACTERISTICS SYMBOL Rth j-a Note 1. Transistor mounted on an FR4 printed-circuit board. CHARACTERISTICS Tj = 25 °C unless otherwise specified. SYMBOL ICBO IEBO hFE PARAMETER collector cut-off current emitter cut-off current DC current gain 2PA1015Y 2PA1015GR hFE VCEsat VBEsat Cc fT F DC current gain base-emitter saturation voltage collector capacitance transition frequency noise figure IC = -150 mA; VCE = -6 V IC = -100 mA; IB = -10 mA IE = ie = 0; VCB = -10 V; f = 1 MHz IC = -200 µA; VCE = -5 V; RS = 2 k; f = 1 kHz; B = 200 Hz collector-emitter saturation voltage IC = -100 mA; IB = -10 mA CONDITIONS IE = 0; VCB = -50 V IC = 0; VEB = -5 V IC = -2 mA; VCE = -6 V 120 200 25 - - - - - - - - - 4 - - MIN. - - TYP. - - PARAMETER thermal resistance from junction to ambient note 1 CONDITIONS VALUE 250
2PA1015
UNIT K/W
MAX. -100 -100 240 400 - -300 -1.1 7 - 10
UNIT nA nA
mV V pF MHz dB
IC = -1 mA; VCB = -10 V; f = 100 MHz 80
1999 Apr 08
3
Philips Semiconductors
Product specification
PNP general purpose transistor
PACKAGE OUTLINE Plastic single-ended leaded (through hole) package; 3 leads
2PA1015
SOT54
c
E d A L b
1
D
2
e1 e
3
b1
L1
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54 REFERENCES IEC JEDEC TO-92 EIAJ SC-43 EUROPEAN PROJECTION ISSUE DATE 97-02-28 A 5.2 5.0 b 0.48 0.40 b1 0.66 0.56 c 0.45 0.40 D 4.8 4.4 d 1.7 1.4 E 4.2 3.6 e 2.54 e1 1.27 L 14.5 12.7 L1(1) 2.5
1999 Apr 08
4
Philips Semiconductors
Product specification
PNP general purpose transistor
DEFINITIONS Data sheet status Objective specification Preliminary specification Product specification Limiting values
2PA1015
This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications.
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
1999 Apr 08
5
Others parts begin by 2p
2P-1
|
|
|
