|Category||Logic => Multiplexers/Demultiplexers => Multiplexers|
|Description||74F711A; 74F711-1; 74F712A; 74F712-1; Multiplexers;; Package: SOT146-1 (DIP20), SOT163 (SO20)|
|Company||Philips Semiconductors (Acquired by NXP)|
|Datasheet||Download 74F7111 datasheet
Quint 2-to-1 Data Selector Multiplexer (3-State) Quint 2-to-1 Data Selector Multiplexer with 30W Equivalent Output Termination Impedance (3-State) Quint 3-to-1 Data Selector Multiplexer Quint 3-to-1 Data Selector Multiplexer with 30W Equivalent Output Termination Impedance
To improve speed and noise immunity, VCC and GND side pins are used. The 74F712A/74F712-1 consist of five 3-to1 multiplexers designed for address multiplexing of dynamic RAMs and other multiplexing applications. The 74F712A has two select (S0, S1) inputs to determine which set of five inputs will be propagated to the five outputs. The outputs source 15mA and sink 64mA. The 74F712-1 is the same as the 74F712A except that it has a 30W termination impedance on each output to reduce line noise and the outputs sink 5mA. TYPICAL SUPPLY CURRENT (TOTAL) 29mA 25mAConsists of five 2-to-1 Multiplexers High impedance PNP base inputs for reduced loading
Designed for address multiplexing of dynamic RAM and other Output inverting/non-inverting option 30W termination impedance on each output 74F711-1 Outputs sink 64mA (74F711A only)Consists of five 3-to-1 Multiplexers High impedance PNP base inputs for reduced loading
Designed for address multiplexing of dynamic RAM and other 30W termination impedance on each output 74F712-1 Outputs sink 64mA (74F712A only)DESCRIPTION
The 74F711A/74F711-1 consist of five 2-to-1 multiplexers designed for address multiplexing of dynamic RAMs and other multiplexing applications. The 74F711A has a common select (S) input, an Output Enable (OE) input and an Output Inverting (INV) input to control the 3-State outputs. The outputs source 15mA and sink 64mA. The 74F711-1 is the same as the 74F711A except that is has a 30W termination impedance on each output to reduce line noise and the 3-State outputs sink 5mA. When the inverting input (INV) is Low, the input data path is inverted.
DESCRIPTION 20-Pin Plastic DIP 24-Pin Plastic Slim DIP (300 mil) 20-Pin Plastic SOL 24-Pin Plastic SOL COMMERCIAL RANGE VCC ± 10% Tamb N74F712AD, N74F712-1D PKG DWG SOT163-1 SOT137-1
PINS Dna, Dnb 74F711-1 OE INV - Q4 Dna, Dnb, Dnc - Q4 Data inputs Select input Output Enable input (active Low) Output inverting input (active Low) Data outputs for 74F711A Data outputs for 74F711-1 Data inputs Select inputs Data outputs for 74F712A Data outputs for 74F712-1 DESCRIPTION 74F(U.L.) HIGH/LOW LOAD VALUE HIGH/LOW 15mA/64mA 15mA/5mA
NOTE: One (1.0) FAST Unit Load (U.L.) is defined as: 20µA in the High state and 0.6mA in the Low state.
|Related products with the same datasheet|
|Some Part number from the same manufacture Philips Semiconductors (Acquired by NXP)|
|74F711A 74F711A; 74F711-1; 74F712A; 74F712-1; Multiplexers;; Package: SOT146-1 (DIP20), SOT163 (SO20)|
|74F723-1 74F723A; 74F723-1; 74F725A; 74F725-1; Various Quad Data Selector Multiplexers (3-State)|
|74F74 74F74; Dual D-type Flip-flop;; Package: SOT27-1 (DIP14)|
|74F756 74F756; 74F757; 74F760; Octal Inverter Buffer (open-collector); Octal Buffer (open-collector); Octal Buffer (open-collector);; Package: SOT146-1 (DIP20), SOT163 (SO20)|
|74F764-1 DRAM Dual-ported Controller|
|74F776 74F776; Pi-bus Transceiver;; Package: SOT117-1 (DIP28), SOT261-2 (PLCC28)|
|74F777 74F777; Triple Bidirectional Latched Bus Transceiver (3-State + Open Collector);; Package: SOT146-1 (DIP20), SOT380-1 (PLCC20)|
|74F779 74F779; 8-bit Bidirectional Binary Counter (3-State);; Package: SOT38-1 (DIP16)|
|74F786 74F786; 4-bit Asynchronous Bus Arbiter;; Package: SOT109 (SO16), SOT38-4 (DIP16)|
|74F804 74F804; 74F1804; Hex 2-input NAND Drivers;; Package: SOT146-1 (DIP20), SOT163 (SO20)|
|74F805 74F805; 74F1805; Hex 2-input Nor Drivers;; Package: SOT146-1 (DIP20), SOT163 (SO20)|
|74F808 74F808; 74F1808; Hex 2-input And Drivers;; Package: SOT146-1 (DIP20), SOT163 (SO20)|
|74F821 74F821; 74F822; 74F823; 74F824; 74F825; 74F826; Bus Interface Registers;; Package: SOT222-1 (DIP24)|
|74F827 74F827; 74F828; 10-bit Buffer/line Driver, Non-inverting (3-State); 10-bit Buffer/line Driver, Inverting (3-State);; Package: SOT137 (SO24), SOT222-1 (DIP24), SOT340-1 (SSOP24)|
|74F832 74F832; 74F1832; Hex 2-input or Drivers;; Package: SOT146-1 (DIP20), SOT163 (SO20)|
|74F835 8-bit Shift Register With 2:1 Mux-in, Latched B Inputs, And Serial Out|
|74F841 74F841/74F842/74F843/74F845/74F846; Bus Interface Latches;; Package: SOT137 (SO24), SOT222-1 (DIP24)|
|74F85 74F85; 4-bit Magnitude Comparator;; Package: SOT162-1 (SO16), SOT38-1 (DIP16)|
|74F86 74F86; Quad 2-input Exclusive-OR GATE;; Package: SOT108-1 (SO14), SOT27-1 (DIP14)|
|74F862 74F862; 74F863; Bus Transceivers (3-State);; Package: SOT137 (SO24), SOT222-1 (DIP24)|
|74F8960 Octal Latched Bidirectional Futurebus Transceivers (3-state + Open-collector)|
74HC133 : CMOS/BiCMOS->HC/HCT Family. 74HC133; 13-input NAND Gate. For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family s The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines Product File under Integrated Circuits, IC06 September 1993 Output capability: standard ICC category: SSI GENERAL The is an high-speed Si-gate CMOS device.
74LVX132 : LVX->HCMOS, 5V Input Tolerant->Low Voltage, Low No. Low Voltage Quad 2-INPUT Schmitt NAND Gate.
74LVX16374 : LVX->HCMOS, 5V Input Tolerant->Low Voltage, Low No. Low Voltage CMOS 16-BIT D-type Flip Flop (3-STATE) With 5V Tolerant Input.
AT16646F : At16646 Fast Logic 16-bit Tri-state Register. Fastest Propagation Speeds in the Industry TPD (F grade) = 2.5 ns, TPD (G grade) 2.0 ns Maximum derating for capacitive loads pF (F grade) and pF (G grade) Very low ground bounce V @ VCC V, Ta=25°C Typical output skew 0.25ns Bus Hold circuitry to retain last active state during Tri-StateTM Available in SSOP and TSSOP packages Atmel's AT16646 devices.
CD74HC4511E : Decoders. ti CD74HC4511, High Speed CMOS Logic BCD-to-7 Segment Latch/decoder/driver.
DM74S153 : Multiplexers->Bipolar->S Family. Dual 1-of-4 Line Data Selector/multiplexer.
DM9312 : Military/Aerospace->TTL. DM9312 - 1-of-8 Line Data Selector/Multiplexer, Package: Cerdip, Pin Nb=16.
HCTS32D : Radiation Hardened Quad 2-input OR GATE. 14 LEAD CERAMIC DUAL-IN-LINE METAL SEAL PACKAGE (SBDIP) MIL-STD-1835 CDIP2-T14 TOP VIEW 3 Micron Radiation Hardened SOS CMOS Total Dose 200K RAD (Si) SEP Effective LET No Upsets: >100 MEV-cm2/mg Single Event Upset (SEU) Immunity x 10-9 Errors/Bit-Day (Typ) Dose Rate Survivability: x 1012 RAD (Si)/s Dose Rate Upset >10 Latch-Up Free Under Any Conditions.
HD74HC365 : Buffers. Hex Bus Drivers With 3-state Outputs. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.
IDT74LVC08A : CMOS/BiCMOS->LVC/ALVC/VCX Family->Low Voltage. 3.3v CMOS Quadruple 2-input Positive-and Gate With 5v Tolerant I/o.
MC100E171FN : Multiplexers. 5V Ecl 3-Bit 4:1 Multiplexer , Package: Plcc, Pins=28. The MC10E/100E171 contains three 4:1 multiplexers with differential outputs. Separate Select controls are provided for the leading 2:1 mux pairs (see logic symbol). The three Select inputs control which one of the four data inputs in each case is propagated to the corresponding output. The 100 Series contains temperature compensation. 725 ps Max. D to Output.
MC100E175FN : 5V Ecl 9-Bit Latch With Parity , Package: Plcc, Pins=28. The a 9-bit latch. It also a tenth latched output, ODDPAR, which is formed as the odd parity of the nine data inputs (ODDPAR is HIGH if an odd number of the inputs are HIGH). The E175 can also be used to generate byte parity by using D8 as the parity-type select (L = even parity, H = odd parity), and using ODDPAR as the byte parity output. The LEN pin latches.
PCK857 : PCK857; 50-150 MHZ Differential 1:10 Sdram Clock Driver;; Package: SOT362-1 (TSSOP48).
SN54AS32 : . Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs These devices contain four independent 2-input positive-OR gates. They perform the Boolean functions or in positive logic. The SN54ALS32 and SN54AS32 are characterized for operation over the full military temperature.
SN74ALS259 : Bipolar->ALS Family. 8-bit Addressable Latch. 8-Bit Parallel-Out Storage Register Performs Serial-to-Parallel Conversion With Storage Asynchronous Parallel Clear Active-High Decoder Enable/Disable Input Simplifies Expansion Expandable for n-Bit Applications Four Distinct Functional Modes Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic.
SN74HCT08D : ti SN74HCT08, Quadruple 2-Input Positive-and Gates. Operating Voltage Range 5.5 V Outputs Can Drive To 10 LSTTL Loads Low Power Consumption, 20-µA Max ICC Typical tpd ns ±4-mA Output Drive 5 V Low Input Current 1 µA Max Inputs Are TTL-Voltage Compatible These devices contain four independent 2-input AND gates. They perform the Boolean function B in positive logic. TA PDIP N SOIC to 85°C SOP NS SSOP.
SN74LS32 : Bipolar->LS Family. Quad 2-input OR GATE. Symbol VCC TA IOH IOL Parameter Supply Voltage Operating Ambient Temperature Range Output Current High Output Current Low Min 4.75 0 Typ 5.0 25 Max Unit °C mA Device SN74LS32M SN74LS32MEL Package 14 Pin DIP SOIC14 SOEIAJ14 Shipping 2000 Units/Box 55 Units/Rail 2500/Tape & Reel See Note 1 See Note 1 1. For ordering information on the EIAJ version.
SN74LS75D : ti SN74LS75, Quad Bistable Latches. PRODUCTION DATA information is current as of publication date. Products conform to s per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. .