|
|
Part: LPC2212FBD144
Category:
Microcontrollers
-> 16/32 bit
Description: 16/32-bit Arm Microcontrollers; 128/256 KB Isp/iap Flash With 10-bit ADC And External Memory Interface<<<>>>based on a 16/32 Bit ARM7TDMI-STM Cpu With Real-time Emulation And Embedded Trace Support, Together With 128/256 Kilobytes (kB) of Embedded High Speed Flash Memory. A 128-bit Wide Memory Interface And a Unique Accelerator Architecture Enable 32-bit Code Execution at Maximum Clock Rate. For Critical Code Size Applications, The Alternative 16-bit Thumb Mode Reduces Code BY More Than 30pct With Minimal Performance Penalty. <<<>>><<<>>>With TheIR 144 Pin Package, Low Power Consumption, Various 32-bit Timers, 8-channel 10-bit ADC, PWM Channels And up to 9 External Interrupt Pins These Microcontrollers Are Particularly Suitable For Industrial Control, Medical Systems, Access Control And Point-of-sale. Number of Available Gpios Ranges From 76 (with External Memory) Through 112 Pins (single-chip). With a Wide Range of Serial Communications Interfaces, They Are Also Very Well Suited For Communication Gateways, Protocol Converters And Embedded Soft Modems as Well as Many Other General-purpose Applications. <<<>>><<<>>> <<<>>> Features Key Features<<<>>>16/32-bit ARM7TDMI-S Microcontroller in a LQFP144 Package. <<<>>>16 KB On-chip Static RAM And 128/256 KB On-chip Flash Program Memory. 128-bit Wide Interface/accelerator Enables High Speed 60 MHZ Operation. <<<>>>In-System Programming (ISP) And In-application Programming (IAP) Via On-chip Boot-loader Software. Flash Programming Takes 1 MS Per 512 Byte Line. Single Sector or Full Chip Erase Takes 400 Ms. <<<>>>EmbeddedICE-RT And Embedded Trace Interfaces Offer Real-time Debugging With The On-chip Realmonitor Software as Well as High Speed Real-time Tracing of Instruction Execution. <<<>>>Eight Channel 10-bit A/D Converter With Conversion Time as Low as 2.44 Us. <<<>>>Two 32-bit Timers (with 4 Capture And 4 Compare Channels), PWM Unit (6 Outputs), Real Time Clock And Watchdog. <<<>>>Multiple Serial Interfaces Including Two Uarts (16C550), Fast i C (400 Kbits/s) And Two Spistm. <<<>>>Vectored Interrupt Controller With Configurable Priorities And Vector Addresses. <<<>>>Configurable External Memory Interface With up to Four Banks, Each up to 16 MB And 8/16/32 Bit Data Width. <<<>>>Up to 112 General Purpose I/o Pins (5 V Tolerant). Up to 9 Edge or Level Sensitive External Interrupt Pins Available. <<<>>>60 MHZ Maximum Cpu Clock Available From Programmable On-chip Phase-locked Loop. <<<>>>On-chip Crystal Oscillator With an Operating Range of 1 MHZ to 30 Mhz. <<<>>>Two Low Power Modes, Idle And Power-down. <<<>>>Processor Wake-up From Power-down Mode Via External Interrupt. <<<>>>Individual Enable/disable of Peripheral Functions For Power Optimization. <<<>>>Dual Power Supply: <<<>>>CPU Operating Voltage Range of 1.65 V to 1.95 V (1.8 V +-0.15 V). <<<>>>I/O Power Supply Range of 3.0 V to 3.6 V (3.3 V +-10pct) With 5 V Tolerant I/o Pads. 16/32-bit ARM7TDMI-S Processor.
Company: Philips Semiconductors
Datasheet: Download LPC2212FBD144 datasheet File size : 198 kB
Request For quote: Find where to buy LPC2212FBD144
Datasheet text preview:
LPC2212/LPC2214
16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP Flash with 10-bit ADC and external memory interface
Rev. 01 -- 02 February 2004 Preliminary data
1. General description
The LPC2212/LPC2214 are based on a 16/32 bit ARM7TDMI-STM CPU with real-time emulation and embedded trace support, together with 128/256 kilobytes (kB) of embedded high speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb Mode reduces code by more than 30% with minimal performance penalty. With their 144 pin package, low power consumption, various 32-bit timers, 8-channel 10-bit ADC, PWM channels and up to 9 external interrupt pins these microcontrollers are particularly suitable for industrial control, medical systems, access control and point-of-sale. Number of available GPIOs ranges from 76 (with external memory) through 112 pins (single-chip). With a wide range of serial communications interfaces, they are also very well suited for communication gateways, protocol conver ters and embedded soft modems as well as many other general-purpose applications.
2. Features
2.1 Key features
s 16/32-bit ARM7TDMI-S microcontroller in a LQFP144 package. s 16 kB on-chip Static RAM and 128/256 kB on-chip Flash Program Memory. 128-bit wide interface/accelerator enables high speed 60 MHz operation. s In-System Programming (ISP) and In-Application Programming (IAP) via on-chip boot-loader software. Flash programming takes 1 ms per 512 byte line. Single sector or full chip erase takes 400 ms. s EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor software as well as high speed real-time tracing of instruction execution. s Eight channel 10-bit A/D converter with conversion time as low as 2.44 µs. s Two 32-bit timers (with 4 capture and 4 compare channels), PWM unit (6 outputs), Real Time Clock and Watchdog. s Multiple serial interfaces including two UARTs (16C550), Fast I2C (400 kbits/s) and two SPIsTM. s Vectored Interrupt Controller with configurable priorities and vector addresses. s Configurable external memory interface with up to four banks, each up to 16 Mb and 8/16/32 bit data width. s Up to 112 general purpose I/O pins (5 V tolerant). Up to 9 edge or level sensitive external interrupt pins available.
Philips Semiconductors
LPC2212/LPC2214
16/32-bit ARM microcontrollers with external memory interface
s 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop. s On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz. s Two low power modes, Idle and Power-down. s Processor wake-up from Power-down mode via external interrupt. s Individual enable/disable of peripheral functions for power optimization. s Dual power supply: x CPU operating voltage range of 1.65 V to 1.95 V (1.8 V ±0.15 V). x I/O power supply range of 3.0 V to 3.6 V (3.3 V ±10%) with 5 V tolerant I/O pads. 16/32-bit ARM7TDMI-S processor.
3. Ordering information
Table 1: Ordering information Package Name LPC2212FBD144 LQFP144 LPC2214FBD144 LQFP144 Description plastic low-profile quad flat package, 144 leads, body 20 × 20 × 1.4 mm plastic low-profile quad flat package, 144 leads, body 20 × 20 × 1.4 mm Version SOT486-1 SOT486-1 Type number
3.1 Ordering options
Table 2: Part options Flash memory 128 kB 256 kB RAM 16 kB 16 kB CAN Temperature range (°C) -40 to +85 -40 to +85 Type number LPC2212FBD144 LPC2214FBD144
9397 750 12747
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Preliminary data
Rev. 01 -- 02 February 2004
2 of 39
Philips Semiconductors
LPC2212/LPC2214
16/32-bit ARM microcontrollers with external memory interface
4. Block diagram
TRST(1) TMS(1) TCK(1)
TDO(1)
TDI(1)
TEST/DEBUG INTERFACE
EMULATION TRACE M OD U L E
PLL system clock
SYSTEM FUNCTIONS
ARM7TDMI-S
AHB BRIDGE ARM7 LOCAL BUS
VECTORED INTERRUPT CONTROLLER
AMBA AHB (Advanced High-performance Bus)
INTERNAL SRAM CONTROLLER
INTERNAL FLASH CONTROLLER AHB TO VPB VPB BRIDGE DIVIDER VPB (VLSI peripheral bus)
AHB DECODER CS3:0* A23:0* BLS3:0* OE, WE* D31:0* SCL SDA
16 kB SRAM
128/256 kB FLASH
EXTERNAL MEMORY CONTROLLER
EINT3:0
EXTERNAL INTERRUPTS
I2C SERIAL INTERFACE
8 x CAP0 8 x MAT
SCK0,1 CAPTURE/ COMPARE TIMER 0 & 1 SPI SERIAL INTERFACES 0 & 1 MOSI0,1 MISO0,1 SSEL0,1 TxD0,1 A/D CONVERTER RxD0,1 UART 0 & 1
DSR1,CTS1, DCD1, RI1
Ain3:0 Ain7:4
P0.30:0 P1.31:16, 1:0 P2.31:0 P3.31:0 GENERAL PURPOSE I/O
PWM6:1
PWM0
WATCHDOG TIMER
REAL TIME CLOCK
SYSTEM CONTROL
*Shared with GPIO
002aaa732
(1) When test/debug interface is used, GPIO/other functions sharing these pins are not available.
Fig 1. Block diagram.
9397 750 12747
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Preliminary data
Rev. 01 -- 02 February 2004
RESET
XTAL1
XTAL2
3 of 39
Others parts begin by lp
LP-1 LP-2 LP-3 LP-4 LP-5 LP-6 LP-7 LP-8 LP-9 LP-10 LP-11 LP-12 LP-13 LP-14 LP-15 LP-16 LP-17 LP-18 LP-19 LP-20
|
|
|
