|
|
Part: LPC2290FBD144
Category:
Microcontrollers
-> 16/32 bit
Description: 16/32-bit Arm Microcontrollers With CAN, 10-bit ADC And External Memory Interface<<<>>>the LPC2290 is Based on a 16/32 Bit ARM7TDMI-STM Cpu With Real-time Emulation And Embedded Trace Support. For Critical Code Size Applications, The Alternative 16-bit Thumb Mode Reduces Code BY More Than 30pct With Minimal Performance Penalty. <<<>>><<<>>>With Its 144 Pin Package, Low Power Consumption, Various 32-bit Timers, 8-channel 10-bit ADC, 2 Advanced CAN Channels, PWM Channels And up to 9 External Interrupt Pins This Microcontroller is Particularly Suitable For Automotive And Industrial Control Applications as Well as Medical Systems And Fault-tolerant Maintenance Buses. LPC2290 Provides up to 76 Gpio Depending on Bus Configuration. With a Wide Range of Additional Serial Communications Interfaces, it is Also Suited For Communication Gateways And Protocol Converters as Well as Many Other General-purpose Applications. <<<>>><<<>>> <<<>>> Features Key Features<<<>>>16/32-bit ARM7TDMI-S Microcontroller in a LQFP144 Package. <<<>>>16 KB On-chip Static RAM. <<<>>>Serial Boot-loader Using UART0 Provides In-system Download And Programming Capabilities. <<<>>>EmbeddedICE-RT And Embedded Trace Interfaces Offer Real-time Debugging With The On-chip Realmonitor Software as Well as High Speed Real-time Tracing of Instruction Execution. <<<>>>Two Interconnected CAN Interfaces With Advanced Acceptance Filters. Additional Serial Interfaces Include Two Uarts (16C550), Fast i C (400 Kbits/s) And Two Spistm. <<<>>>Eight Channel 10-bit A/D Converter With Conversion Time as Low as 2.44 Us. <<<>>>Two 32-bit Timers (with 4 Capture And 4 Compare Channels), PWM Unit (6 Outputs), Real Time Clock And Watchdog. <<<>>>Vectored Interrupt Controller With Configurable Priorities And Vector Addresses. <<<>>>Configurable External Memory Interface With up to Four Banks, Each up to 16 MB And 8/16/32 Bit Data Width. <<<>>>Up to 76 General Purpose I/o Pins (5 V Tolerant). Up to 9 Edge/level Sensitive External Interrupt Pins Available. <<<>>>60 MHZ Maximum Cpu Clock Available From Programmable On-chip Phase-locked Loop. <<<>>>On-chip Crystal Oscillator With an Operating Range of 1 MHZ to 30 Mhz. <<<>>>Two Low Power Modes, Idle And Power-down. <<<>>>Processor Wake-up From Power-down Mode Via External Interrupt. <<<>>>Individual Enable/disable of Peripheral Functions For Power Optimization. <<<>>>Dual Power Supply: <<<>>>CPU Operating Voltage Range of 1.65 V to 1.95 V (1.8 V +-0.15 V). <<<>>>I/O Power Supply Range of 3.0 V to 3.6 V (3.3 V +-10pct) With 5 V Tolerant I/o Pads
Company: Philips Semiconductors
Datasheet: Download LPC2290FBD144 datasheet File size : 198 kB
Request For quote: Find where to buy LPC2290FBD144
Datasheet text preview:
LPC2290
16/32-bit ARM microcontrollers with CAN, 10-bit ADC and external memory interface
Rev. 01 -- 09 February 2004 Preliminary data
1. General description
The LPC2290 is based on a 16/32 bit ARM7TDMI-STM CPU with real-time emulation and embedded trace suppor t. For critical code size applications, the alternative 16-bit Thumb Mode reduces code by more than 30% with minimal performance penalty. With its 144 pin package, low power consumption, various 32-bit timers, 8-channel 10-bit ADC, 2 advanced CAN channels, PWM channels and up to 9 external interrupt pins this microcontroller is particularly suitable for automotive and industrial control applications as well as medical systems and fault-tolerant maintenance buses. LPC2290 provides up to 76 GPIO depending on bus configuration. With a wide range of additional serial communications interfaces, it is also suited for communication gateways and protocol converters as well as many other general-purpose applications.
2. Features
2.1 Key features
s 16/32-bit ARM7TDMI-S microcontroller in a LQFP144 package. s 16 kB on-chip Static RAM. s Serial boot-loader using UART0 provides in-system download and programming capabilities. s EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor software as well as high speed real-time tracing of instruction execution. s Two interconnected CAN interfaces with advanced acceptance filters. Additional serial interfaces include two UARTs (16C550), Fast I2C (400 kbits/s) and two SPIsTM. s Eight channel 10-bit A/D converter with conversion time as low as 2.44 µs. s Two 32-bit timers (with 4 capture and 4 compare channels), PWM unit (6 outputs), Real Time Clock and Watchdog. s Vectored Interrupt Controller with configurable priorities and vector addresses. s Configurable external memory interface with up to four banks, each up to 16 Mb and 8/16/32 bit data width. s Up to 76 general purpose I/O pins (5 V tolerant). Up to 9 edge/level sensitive external interrupt pins available.
Philips Semiconductors
LPC2290
16/32-bit ARM microcontrollers with external memory interface
s 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop. s On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz. s Two low power modes, Idle and Power-down. s Processor wake-up from Power-down mode via external interrupt. s Individual enable/disable of peripheral functions for power optimization. s Dual power supply: x CPU operating voltage range of 1.65 V to 1.95 V (1.8 V ±0.15 V). x I/O power supply range of 3.0 V to 3.6 V (3.3 V ±10%) with 5 V tolerant I/O pads.
3. Ordering information
Table 1: Ordering information Package Name LPC2290FBD144 LQFP144 Description plastic low profile quad flat package, 144 leads, body 20 × 20 × 1.4 mm Version SOT486-1 Type number
3.1 Ordering options
Table 2: Part options Flash memory RAM 16 kB CAN 2 channels Temperature range (°C) -40 to +85 Type number LPC2290FBD144
9397 750 12874
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Preliminary data
Rev. 01 -- 09 February 2004
2 of 41
Philips Semiconductors
LPC2290
16/32-bit ARM microcontrollers with external memory interface
4. Block diagram
TRST(1) TMS(1) TCK(1) TDI(1) TDO(1)
TEST/DEBUG INTERFACE
EMULATION TRACE MODULE
PLL system clock
SYSTEM FUNCTIONS
ARM7TDMI-S
AHB BRIDGE ARM7 LOCAL BUS
VECTORED INTERRUPT CONTROLLER
AMBA AHB (Advanced High-performance Bus)
INTERNAL SRAM CONTROLLER
AHB DECODER AHB TO VPB VPB BRIDGE DIVIDER VPB (VLSI peripheral bus) CS3:0* A23:0* BLS3:0* OE, WE* D31:0* SCL SDA
16 kB SRAM
EXTERNAL MEMORY CONTROLLER
EINT3:0
EXTERNAL INTERRUPTS
I2C SERIAL INTERFACE
8 x CAP0 8 x MAT
SCK0,1 CAPTURE/ COMPARE TIMER 0 & 1 SPI SERIAL INTERFACES 0 & 1 MOSI0,1 MISO0,1 SSEL0,1 TxD0,1 A/D CONVERTER RxD0,1 UART 0 & 1
DSR1,CTS1, DCD1, RI1
Ain3:0 Ain7:4
P0.30:0 P1.31:16, 1:0 P2.31:0 P3.31:0 GENERAL PURPOSE I/O TD2:1 CAN RD2:1
PWM6:1
PWM0
WATCHDOG TIMER
REAL TIME CLOCK
SYSTEM CONTROL
*Shared with GPIO
002aaa796
(1) When test/debug interface is used, GPIO/other function sharing these pins are not available.
Fig 1. Block diagram.
9397 750 12874 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Preliminary data
Rev. 01 -- 09 February 2004
RESET
XTAL1
XTAL2
3 of 41
Others parts begin by lp
LP-1 LP-2 LP-3 LP-4 LP-5 LP-6 LP-7 LP-8 LP-9 LP-10 LP-11 LP-12 LP-13 LP-14 LP-15 LP-16 LP-17 LP-18 LP-19 LP-20
|
|
|
