Digchip : Database on electronics components
Electronic components database
Search:                      In section:
Member, Distributor  
Log In
Email:
Password:

Details, datasheet, quote on part number:XA-G49
 
 
Part:XA-G49
Description:XA-G49; Xa 16-bit Microcontroller Family 64K FLASH/2K RAM, Watchdog, 2 Uarts
Company:Philips Semiconductors
Datasheet:Download XA-G49 datasheet   File size : 239 kB
Request For quote:  Find where to buy XA-G49
 



Datasheet text preview:
INTEGRATED CIRCUITS
XA-G49 XA 16-bit microcontroller family
64K FLASH/2K RAM, watchdog, 2 UARTs
Preliminary data Supersedes data of 2000 Dec 01 IC28 Data Handbook 2001 Jun 27
Philips Semiconductors
Philips Semiconductors
Preliminary data
XA 16-bit microcontroller family 64K Flash/2K RAM, watchdog, 2 UARTs
XA-G49
GENERAL DESCRIPTION
The XA-G49 is a member of Philips' 80C51 XA (eXtended Architecture) family of high performance 16-bit single-chip microcontrollers. The XA-G49 contains 64 kbytes of Flash program memory, and provides three general purpose timers/counters, a watchdog timer, dual UARTs, and four general purpose I/O ports with programmable output configurations. A default serial loader program in the Boot ROM allows In-System Programming (ISP) of the Flash memory without the need for a loader in the Flash code. User programs may erase and reprogram the Flash memory at will through the use of standard routines contained in the Boot ROM (In-Application Programming).
· Single supply voltage In-System Programming (ISP) of the Flash · Boot ROM contains low level Flash programming routines for
In-Application Programming and a default serial loader using the UART memory (VPP = VDD, or VPP = 12 V if desired)
· 2048 bytes of on-chip data RAM · Supports off-chip program and data addressing up to 1 megabyte
(20 address lines)
· Three standard counter/timers with enhanced features (same as
XA-G3 T0, T1, and T2). All timers have a toggle output capability
FEATURES
· 64 kbytes of on-chip Flash program memory with In-System
Programming capability
· Watchdog timer · Two enhanced UARTs with independent baud rates · Seven software interrupts · Four 8-bit I/O ports, with 4 programmable output configurations for
each pin
· Five Flash blocks = two 8 kbyte blocks and three 16 kbyte blocks · Nearly identical to XA-G3, except for double the program and
RAM memories
· 30 MHz operating frequency at 5 V · Power saving operating modes: Idle and Power-Down.
Wake-Up from power-down via an external interrupt is supported.
· 44-pin PLCC and 44-pin LQFP packages
BLOCK DIAGRAM
XA CPU Core
Program Memory Bus 64K Bytes FLASH Data Bus
SFR bus UART 0
2048 Bytes Static RAM Port 0 Port 1
UART 1
Timer 0, 1
Timer 2 Port 2 Port 3 Watchdog Timer
SU01002
2001 Jun 27
2
Philips Semiconductors
Preliminary data
XA 16-bit microcontroller family 64K Flash/2K RAM, watchdog, 2 UARTs
XA-G49
ORDERING INFORMATION
FLASH PXAG49KBA PXAG49KFA PXAG49KBBD TEMPERATURE RANGE (°C) AND PACKAGE 0 to +70 44-pin Plastic Leaded Chip Carrier ­40 to +85 44-pin Plastic Leaded Chip Carrier 0 to +70 44-pin Plastic Low Profile Quad Flat Package FREQ. (MHz) 30 30 30 DRAWING NUMBER SOT187-2 SOT187-2 SOT389-1
LOGIC SYMBOL
VDD V SS
XTAL1 T2EX* T2* TXD1 RXD1 A3 A2 A1 A0/WRH ADDRESS BUS
XTAL2
RST EA/WAIT PSEN ADDRESS AND DATA BUS ALE PORT 2 PORT 0
ALTERNATE FUNCTIONS
RxD0 TxD0 INT0 INT1 T0 T1/BUSW WRL RD
*
NOT AVAILABLE ON 40-PIN DIP PACKAGE
PORT 3
PORT 1
SU00526
2001 Jun 27
3