Details, datasheet, quote on part number: 24IMS6-05-9
Part24IMS6-05-9
CategoryData Conversion => Multiplying Data Converters
Description6 Watt SMD And Through Hole DC/DC Converters
CompanyPower-One
DatasheetDownload 24IMS6-05-9 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Input to output electric strength test kV DC Input voltage ranges: 18...36 and V DC Single and dual outputs 15 V DC Wide input voltage ranges Electrical isolation, single and dual outputs Immunity to IEC/EN and -6 High efficiency (typ. 82%) Flex power: flexible load distribution No load and short-circuit proof High reliability and no derating Operating ambient temperature 40...+ 71 oC Industrial, alternative and SMD pinout DIL 24 case with 9.0 mm profile Safety approvals pending to IEC/EN UL 1950 LGA

The IMS 6 series of board mountable 6 W DC-DC converters has been designed according to the latest industry requirements and standards. The converters are particularly suitable for use in mobile or stationary applications in transport, industry or telecommunications where variable input voltages or high transient voltages are prevalent. Covering a total input voltage range from 75 V DC. The converters are designed and built according to the international safety standards IEC/EN UL 1950, CAN/CSA C22.2 No.950-95 and are LGA and UL marked.

A special feature is their small case size, DIL 24 with only 9.0 mm profile. The circuit comprises integrated planar magnetics and all components are automatically assembled and solidly soldered onto a single PCB without any wire connections. Thanks to the rigid mechanical design the units withstand an extremely high level of shock and vibrations. Careful considerations of possible thermal stresses ensure the absence of hot spots providing long life in environments where temperature cycles are a reality. The thermal design allows operation at full load to an ambient temperature C in free air without using any potting material. Options : SMD pinout or K-pinout, an alternative to the standard industrial pinout, provide a high level of application specific engineering and design-in flexibility.

Page Electromagnetic Compatibility (EMC).............................. 8 Mechanical Data.............................................................. 9 Immunity to Environmental Conditions........................... 10 Safety and Installation Instructions................................ 11 Description of Options.................................................... 13

Summary.......................................................................... 1 Type Survey and Key Data.............................................. 2 Type Key.......................................................................... 2 Functional Description...................................................... 3 Electrical Input Data......................................................... 4 Electrical Output Data...................................................... 6

Options
Flexible load distribution on double outputs possible , 25% asymetric loading.

48 IMS M Z Input voltage range 16...36 V DC............................................. 36...75 V DC........................................... 48 Series........................................................................ IMS 6 Output voltage type for output Output voltage type for output Operating ambient temperature range TA 40...71 C.................................................. -9 Options: Alternative pinout......................................... 1 2 SMD-pinout................................................. 1 2 Open frame................................................. Z

For delivery lead times contact factory. Some types require a minimum order quantity.

The IMS 6 DC-DC modules are feedback controlled flyback converters using current mode PWM (Pulse Width Modulation). The converter input is protected against transients by means of a suppressor diode. The output voltage is monitored by a separate transformer winding close to the secondary windings and fed back to the control circuit.

Current limitation is provided by the primary circuit, thus limiting the total output current (Io nom for the single and Io1 nom + Io2 nom for the dual output types). The close magnetic coupling provided by the planar construction ensures very good regulation and allows for flexible load distribution on dual output types.

Fig. 1 Block diagram for single output types. Standard industrial pinout.
Fig. 2 Block diagram for dual output types. Standard industrial pinout.
Fig. 3 Block diagram for single output types. Special pinout (Option K).
Fig. 4 Block diagram for dual output types. Special pinout (Option K).
Fig. 5 Block diagram for single output types. SMD pinout (Option M).
Fig. 6 Block diagram for dual output types. SMD pinout (Option M).

 

Related products with the same datasheet
24IMS6-0505-9
24IMS6-12-9
24IMS6-1212-9
24IMS6-15-9
24IMS6-1515-9
Some Part number from the same manufacture Power-One
24IMS6-0505-9 6 Watt SMD And Through Hole DC/DC Converters
24IMS7-03-9 7 Watt DC-DC Converters
24IXP3-05-05-7 3 Watt DC-DC Converters
24Q1001-2R Input Voltage Range:16-36V, Output Voltage 5.1V (16A), DC-DC Converter
24Q2001-2R 60...132 Watt DC-DC Converters
24Q2320-2R Input Voltage Range:16-36V, Output Voltage 12V (8A), DC-DC Converter
24Q2540-2R Input Voltage Range:16-36V, Output Voltage 15V (6.6A), DC-DC Converter
24Q2660-2R 60...132 Watt DC-DC Converters
2502V0S48LN Input Voltage = 36-75 ;; Output Voltage = 2.0 ;; Output Current = 6A
2503S12HN Input Voltage = .9-18 ;; Output Voltage = .3.3 ;; Output Current = 4000mA
2503S72RW Input Voltage = 45-160 ;; Output Voltage = .3.3 ;; Output Current = 7.5A ;; Ovp VDC = .5.1
2503V3S48LN Input Voltage = 36-75 ;; Output Voltage = 2.0 ;; Output Current = 6A
2505/12T12
2505/12T12HN Input Voltage = .9-18 ;; Output Voltage = .3.3 ;; Output Current = 4000mA
2505/12T24
2505/12T24HN Input Voltage = .9-18 ;; Output Voltage = .3.3 ;; Output Current = 4000mA
2505/12T48
2505/12T48HN Input Voltage = .9-18 ;; Output Voltage = .3.3 ;; Output Current = 4000mA
2505/12T72RW Input Voltage = 45-160 ;; Output Voltage = .3.3 ;; Output Current = 7.5A ;; Ovp VDC = .5.1
2505/15T12
2505/15T12HN Input Voltage = .9-18 ;; Output Voltage = .3.3 ;; Output Current = 4000mA
Same catergory

AD7541ATE : CMOS 12-bit Monolithic Multiplying DAC. Improved Version of AD7541 Full Four-Quadrant Multiplication 12-Bit Linearity (Endpoint) All Parts Guaranteed Monotonic TTL/CMOS Compatible Low Cost Protection Schottky Diodes Not Required Low Logic Input Leakage The Analog Devices is a low cost, high performance 12-bit monolithic multiplying digital-to-analog converter. It is fabricated using advanced,.

ADC1005 : ADC1005 - 10-Bit Microprocessor Compatible A/D Converter, Package: Cerdip, Pin Nb=20.

ADS5120 : 8 Channel, 10 Bit, 40MSPS ADC, 1.8V. q 8 DIFFERENTIAL ANALOG INPUTS q 1VPP DIFFERENTIAL INPUT RANGE q INT/EXT VOLTAGE REFERENCE q ANALOG/DIGITAL SUPPLY 1.8V q DIGITAL I/O SUPPLY 1.8V/3.3V q INTEGRAL NONLINEARITY: 0.8LSB q SIGNAL-TO-NOISE: 58dB at fIN 20MHz q SPURIOUS-FREE DYNAMIC RANGE: 72dB at fIN q 794mW POWER DISSIPATION q INDIVIDUAL CHANNEL POWER-DOWN 257-LEAD, 0.8 BALL PITCH, PLASTIC.

ADS825 : . HIGH SNR: 60dB HIGH SFDR: 72dBFS LOW POWER: 190mW INTERNAL/EXTERNAL REFERENCE OPTION SINGLE-ENDED OR FULLY DIFFERENTIAL ANALOG INPUT q PROGRAMMABLE INPUT RANGE q LOW DNL: 0.5LSB q SINGLE +5V SUPPLY OPERATION OR +5V LOGIC I/O COMPATIBLE (ADS825) q POWER DOWN: q SSOP-28 PACKAGE APPLICATIONS q MEDICAL IMAGING q TEST EQUIPMENT q COMPUTER SCANNERS q COMMUNICATIONS.

DAC7714 : . Quad, Serial Input, 12-Bit, Voltage Output DIGITAL-TO-ANALOG CONVERTER q LOW POWER: 250mW (max) q UNIPOLAR OR BIPOLAR OPERATION q SETTLING TIME: q 12-BIT LINEARITY AND MONOTONICITY: +85C q USER SELECTABLE RESET TO MIDSCALE OR ZERO-SCALE q SECOND-SOURCE for DAC8420 q SMALL SO-16 PACKAGE The is a quad, serial input, 12-bit, voltage output Digital-to-Analog.

LTC2412 : Multiplexed. LTC2412, 2-Ch Differential Input 24-Bit no Latency Delta Sigma.

MX7523 : CMOS, 8-Bit Multiplying DAC.

TC3400 : Sigma Delta A/D Converters. The TC3400 is a Low Cost, Low Power Analog-to-digital Converter Based on Microchip’s Sigma-delta Technology.

TC7129 : Display A/D Converters. The TC7129 is a 4-1/2 Digit Analog-to-digital Converter (ADC)that Directly Drives a Multiplexed Liquid Crystal Display (LCD).

TLC7528 : . Easily Interfaced to Microprocessors On-Chip Data Latches Monotonic Over the Entire A/D Conversion Range Interchangeable With Analog Devices AD7528 and PMI PM-7528 Fast Control Signaling for Digital Signal Processor (DSP) Applications Including Interface With TMS320 Voltage-Mode Operation CMOS Technology KEY PERFORMANCE S Resolution Linearity Error.

TLV2542 : . TO 5.5-V, LOW-POWER, 12-BIT, 140/200 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTOPOWER DOWN D Maximum Throughput. 140/200 KSPS D Built-In Conversion Clock D INL/DNL: 1 LSB Max, SINAD: 72 dB, SFDR: 85 dB, = 20 kHz SPI/DSP-Compatible Serial Interface Single Supply: 2.7 Vdc to 5.5 Vdc Rail-to-Rail Analog Input With 500 kHz BW Three Options Available:.

AT84AS008GL : 10-bit 2.2Gsps ADC The AT84AS008GL ADC is a high linearity 10-bit 2.2 Gsps version that offers significant improvements in performance while retaining the same functions and I/O interface as the TS83102G0B 10-bit 2 Gsps ADC. The SNR [Signal to Noise Ratio] shows a 10 dB improvement, leading to an ENOB [Effective Number Of bits] of 8 bits at 1.7 Gsps.

WM8782 : The WM8782 is a high performance, low cost stereo audio ADC designed for recordable media applications..

LTC2640-12 : Single 12-Bit SPI VOUT DACs With Bidirectional Reference The LTC2640 is a family of 12-, 10-, and 8-bit voltage-output DACs with an integrated, high-accuracy, low-drift reference in an 8-lead TSOT-23 package. It has a rail-to-rail output buffer that is guaranteed monotonic. The LTC2640-L has a full-scale output of 2.5V, and operates from a single 2.7V.

AD9628 : 12-Bit, 125/105 MSPS, 1.8 V Dual Analog-to-Digital Converter The AD9628 is a monolithic, dual-channel, 1.8 V supply, 12-bit, 125 MSPS/105 MSPS analog-to-digital converter (ADC). It a high performance sample-and-hold circuit and on-chip voltage reference..

 
0-C     D-L     M-R     S-Z