|Description||BWS DC/DC Converters ( 2.5 Watt )|
|Datasheet||Download BWS1212 datasheet
DESCRIPTION BWS DC/DC converters offer excellent regulation and isolation in an industry-standard DIP package. The BWS is ideal for industrial, telecom, and networking applications, and features short circuit protection, low profile, and 500 VDC isolation. Please see the BWD series for dual output applications. TECHNICAL SPECIFICATIONS
Input Voltage Range 5 VDC Nominal 12 VDC Nominal Reflected Ripple Reverse Input Current - 9 VDC - 18 VDC 20% Iin Max. 100% Iin Max.
FEATURES Industry Standard DIP Package Industry Standard Pinout 85°C Case Operation Short Circuit Protection Wide Range Inputs Input Pi Filter Regulated Outputs 500V Isolation
Output Setpoint Accuracy Line Regulation Vin Min. - Vin Max., Iout Rated Load Regulation Iout Min. - Iout Max., Vin Nom. Minimum Output Current Dynamic Regulation, Loadstep Pk Deviation Settling Time Temperature Coefficient Ripple And Noise, 20 MHz BW Short Circuit Protection 1 Current Limit ±5% ±1.5% Vout ±2.5% Vout 10% Iout Rated 25% Iout 1% Vout 150 mV Continuous 180%
General Switching Frequency Isolation Input - Output Input - Case Output - Case Isolation Resistance - Input to Output Isolation Capacitance - Input to Output No Load Input Power Case Temperature Standard Operating Range Storage Range Humidity Max., Non-Condensing Vibration, 3 Axes, 5 Min Each Safety Weight (approx.) 200 kHz 500 VDC 500 VDC 500 VDC 109 Ohms 55 Hz UL, cUL, TUV 0.6 oz
1 Continuous short circuit protection is provided. Long-term continuous operation in this mode is not recommended. Converter will auto-restart once fault has been removed. Specifications typically at 25°C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information.MODELS - (See the last page of section for options.)
MODEL INPUT VOLTAGE (VOLTS) INPUT VOLTAGE RANGE (VOLTS) MAXIMUM INPUT CURRENT (AMPS)* OUTPUT VOLTAGE (VOLTS) RATED OUTPUT CURRENT (AMPS) RIPPLE & NOISE pk-pk (mV) TYPICAL EFFICIENCY**
* Maximum input current at minimum input voltage, maximum rated output power. At nominal Vin, rated output.Natural Convection 100 LFM 200 LFM 300 LFM 400 LFM 23.6 °C/W 16.7 °C/W 13.1 °C/W 9.4 °C/W 8.5 °C/W
Function No Pin -Vin / +Vin -Vin / +Vin No Pin No Pin No Pin No Pin No Pin NC / -Vout NC / +Vout No Pin Inches:.XX ± 0.010 Pin: ± 0.002
Note: Thermal impedance data is dependent on many environmental factors. The exact thermal performance should be validated for specific application.OPTIONS
When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table.
Negative Logic Lucent-Compatible Terminal Strip Trim Enable Trim and Enable Current Share Headerless
HAS, HBD, HBS, HES, HLS, HLD, LES, QBS, QES, QLS, TES, TQD HAS, HBD, HBS, HES, HLS, QBS, QES, QLS XWS, XWD, XWT IAS, LES IAD, IAS, LES, SMS IAS, LES SMS Encapsulated EWS, IWS, OWSTTL "Low" Turns Module ON TTL "High" Turns Module OFF
Pin Length and Heatsink Options 0.110" (2.8mm) Pin Length 0.150" (3.8mm) Pin Length 0.24" (6.1mm) Horizontal Heatsink 0.24" (6.1mm) Vertical Heatsink 0.45" (11.4mm) Horizontal Heatsink 0.45" (11.4mm) Vertical Heatsink 0.95" (24.1mm) Horizontal Heatsink 0.95" (24.1mm) Vertical Heatsink 3H 3V All Units (Except SMS) All Units (Except SMS) All Units (All Units Except DIP, HLS, HLD, QLS, SIP, SM, TLD, and TKD Packages) All Units (All Units Except DIP, HLS, HLD, QLS, SIP, SM, TLD, and TKD Packages) All Units (All Units Except DIP, HLS, HLD, QLS, SIP, SM, TLD, and TKD Packages) All Units (All Units Except DIP, HLS, HLD, QLS, SIP, SM, TLD, and TKD Packages) All Units (All Units Except DIP, HLS, HLD, QLS, SIP, SM, TLD, and TKD Packages) All Units (All Units Except DIP, HLS, HLD, QLS, SIP, SM, TLD, and TKD Packages)
Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad
Example Options: = HBS050ZG-A with negative logic, Lucent-compatible trim, and 0.95" vertical heatsink. = LES015YJ with optional trim and enable, negative logic. = QBS066ZG-A with Lucent-compatible trim and 0.110" pin length.
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice.
|Some Part number from the same manufacture Power-One|
|BWS1215 BWS DC/DC Converters ( 2.5 Watt )|
|BXA10-12D05 Input Voltage = ..9-18 ;; Output Voltage = .. 5V ;; Output Current = 1000mA|
|BXA3-12S15 Input Voltage = .9-18 ;; Output Voltage = 15.0 ;; Output Current = 200mA|
|BXA30-12S05 Input Voltage = .9-18 ;; Output Voltage = .5.0 ;; Output Current = 5A|
|BXA30-24T05-15 Input Voltage = 18-36 ;; Output Voltage = 5/ 15 ;; Output Current (max) = 3/ 500mA ;; Input Current no Load = 70mA RMS|
|BXA30-48D05 Input Voltage = .9-18 ;; Output Voltage = .5.0 ;; Output Current = 5A|
|BXA30-48T05-12 Input Voltage = 18-36 ;; Output Voltage = 5/ 15 ;; Output Current (max) = 3/ 500mA ;; Input Current no Load = 70mA RMS|
|BXA40-24S05 Input Voltage = 18-36 ;; Output Voltage = .5.0 ;; Output Current = 8.0A|
|BXA40-48T05-12 Input Voltage = 36-75 ;; Output Voltage = 5/ 12 ;; Output Current (max) = 6A/ 400mA ;; Input Current = 30mA|
|BXB100-24S12 Input Voltage = 18-36 ;; Ovp = 14.5 VDC ;; Output Voltage = 12 ;; Output Current (minimum) = 0A ;; Output Current (maximum) = 8.33A|
|BXB150-24S3V3F Input Voltage = 18-36 ;; Ovp = 4.3 VDC ;; Output Voltage = 3.3 ;; Output Current = 30.0A|
|BXB50-24S12 Input Voltage = 18-36 ;; Ovp = 14.5VDC ;; Output Voltage = 12.0 ;; Output Current (minimum) = 0A ;; Output Current (maximum) = ..4160mA|
|BXB75-48D05-3V3 Input Voltage = 36-75 ;; Ovp = 6.0/4.0VDC ;; Output Voltage = 5/3.3 ;; Output Current (minimum) = 1A ;; Output Current (maximum) = 15A|
|BXB75-48S05 Input Voltage = 36-75 ;; Ovp = ..6.5 VDC ;; Output Voltage = .5.0 ;; Minimum Output Current = 0A ;; Maximum Output Current = 15.00A|
|CG3020-7 25 Watt DC-DC Converters|
|CHS1209 Chs1209 DC/DC Converter ( 3 Watt )|
|CK1001-7R 150 Watt DC-DC Converters|
48IMS7-24-24-9 : 7 Watt DC-DC Converters
ASQ24T04050-NEAT : 1-OUTPUT 22.73 W DC-DC REG PWR SUPPLY MODULE Specifications: Package Type: Other, ROHS COMPLIANT PACKAGE-8 ; Output Voltage: 1.48 to 1.52 volts ; Input Voltage: 18 to 36 volts ; Output Power: 22.73 watts (0.0305 HP) ; Operating Temperature: -55 to 85 C (-67 to 185 F)
BM3040-9PV3H : 3-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE Specifications: Package Type: Other, METAL, CASE M02, MODULE ; Output Voltage: 5.07 to 5.13 volts ; Input Voltage: 14 to 70 volts ; Output Power: 50 watts (0.0670 HP) ; Operating Temperature: -25 to 71 C (-13 to 160 F)
CK2540-7RD5 : 2-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE Specifications: Package Type: Other, HEAT SINK, METAL, CASE K02, MODULE ; Output Voltage: 14.91 to 15.09 volts ; Input Voltage: 28 to 140 volts ; Output Power: 150 watts (0.2010 HP) ; Operating Temperature: -25 to 71 C (-13 to 160 F)
DMZ2540-9PD8 : 2-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE Specifications: Package Type: Other, METAL, CASE M02, MODULE ; Output Voltage: 14.25 to 15.75 volts ; Input Voltage: 44 to 220 volts ; Output Power: 50 watts (0.0670 HP) ; Operating Temperature: -40 to 71 C (-40 to 160 F)
HES100ZG-ANT2V : 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE Specifications: Output Voltage: 2.97 to 3.63 volts ; Input Voltage: 36 to 72 volts ; Output Power: 150 watts (0.2010 HP) ; Operating Temperature: -40 to 85 C (-40 to 185 F)
LS1001-7ERD9B1 : 1-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE Specifications: Output Voltage: 5.07 to 5.13 volts ; Input Voltage: 85 to 264 volts ; Output Power: 100 watts (0.1340 HP) ; Operating Temperature: -25 to 71 C (-13 to 160 F)
QM48S14120-NS0PG : 1-OUTPUT 168 W DC-DC REG PWR SUPPLY MODULE Specifications: Package Type: Other, QUARTER BRICK, PACKAGE-8 ; Output Voltage: 9.6 to 13.2 volts ; Input Voltage: 36 to 75 volts ; Output Power: 168 watts (0.2252 HP) ; Operating Temperature: -40 to 85 C (-40 to 185 F)
AD1671 : Complete 12-Bit 1.25 MSPS Monolithic A/D Converter. Conversion Time: ns 1.25 MHz Throughput Rate Complete: On-Chip Sample-and-Hold Amplifier and Voltage Reference Low Power Dissipation: mW No Missing Codes Guaranteed Signal-to-Noise Plus Distortion Ratio fIN = 100 kHz: 70 dB Pin Configurable Input Voltage Ranges Twos Complement or Offset Binary Output Data 28-Pin DIP and 28-Pin Surface Mount Package.
ADC08131 : ADC08131 - 8-Bit High Speed Serial I/o A/D Converter With Multiplexer Options, Voltage Reference And Track/hold Function, Package: Soic Wide, Pin Nb=14.
ADS-937 : 1mhz, Low Power Sampling ADC: 16-bit. 16-bit resolution 1MHz minimum sampling rate No missing codes over full military temperature range Very low power, 1.25 Watts Small, 32-pin, side-brazed, ceramic TDIP Edge-triggered Excellent performance Ideal for both time and frequency-domain applications Low cost PIN FUNCTION ANALOG INPUT ANALOG GROUND UNIPOLAR OFFSET ADJUST +5V REFERENCE OUT GAIN.
ADS8381 : 18 Bit 580KSPS Parallel ADC. 18BIT, 580kHz, UNIPOLAR INPUT, MICRO POWER SAMPLING ANALOGTODIGITAL CONVERTER WITH PARALLEL INTERFACE D 580-kHz Sample Rate D 18-Bit NMC Ensured Over Temperature D Zero Latency D Low Power: at 580 kHz D Unipolar Input Range D Onboard Reference Buffer and Conversion APPLICATIONS D Medical Instruments D Optical Networking D Transducer Interface D High.
HFA3624IA : 2.4ghz Up/down Converter. The Intersil 2.4GHz PRISMTM chip set is a highly integrated five-chip solution for RF modems employing Direct Sequence Spread Spectrum (DSSS) signaling. The HFA3624 RF/IF converter is one of the five chips in the PRISMTM chip set (see Figure 1 for the typical application circuit). Complete Receive/Transmit Front End RF Frequency Range. 2.5GHz IF Operation.
HI1171 : 8-Bit, 40 Msps, High Speed D/A Converter. The 8-bit, 40MHz, high speed D/A converter. The converter incorporates an 8-bit input data register with blanking capability, and current outputs. The HI1171 low glitch outputs. The architecture is a current cell arrangement to provide low linearity errors. The HI1171 is available in an Industrial temperature range and is offered a 24 lead (200 mil).
nAD1020-18 : Analog to Digital Converter ip. 1.8V power supply SNR typ 60dB for (fin = 10MHz) Low power @ 1.8V and 20MSPS) Frequency dependent biasing Internal Sample/Hold Differential input Low input capacitance Power Down and Sleep Mode APPLICATIONS Imaging Test equipment Computer scanners Wireless communication Powerline communication Set top boxes Video products The is a compact, high-speed,.
NJU9204B : Display Output ADC. 3.1/2 Digit Single Chip A/D Converter With Display Hold.
WM2613 : Industrial. WM2613 : Byte-wide Parallel Input, 12-BIT Voltage Output DAC.
ADC14L020 : 14-Bit, 20 MSPS, 150 mW A/D Converter The ADC14L020 is a low power monolithic CMOS analog-to-digital converter capable of converting analog input signals into 14-bit digital words at 20 Megasamples per second (MSPS). This converter uses a differential, pipeline architecture with digital error correction and an on-chip sample-and-hold circuit to minimize.
ADC14V155 : The ADC14V155 is a high-performance CMOS analog-to-digital converter with LVDS outputs. It is capable of converting analog input signals into 14-Bit digital words at rates up to 155 Mega Samples Per Second (MSPS). Data leaves the chip in a DDR (Dual Data rate) Format; this allows both edges of the output clock to be utilized while achieving a smaller.
AD6659 : 12-BIT, 80 MSPS, 1.8 V BASEBAND DIVERSITY RECEIVER The AD6659 is a mixed-signal, dual-channel baseband receiver supporting radio topologies requiring two receiver signal paths, such as in main/diversity or direct conversion. This communi-cations systems processor consists of two high performance analog-to-digital converters (ADCs) and noise shaping.
MAX11129 : 3Msps, Low-Power, Serial 12-/10-Bit, 8-/16-Channel ADCs The MAX11129–MAX11132 are 12-/10-bit with external reference and industry-leading 1.5MHz, full linear bandwidth, high speed, low-power, serial output successive approximation (SAR) analog-to-digital converters (ADCs). The MAX11129–MAX11132 include both internal and external clock modes. These devices.
LTC2162 : 16-Bit, 65Msps Low Power ADCs The LTC®2162/LTC2161/LTC2160 are sampling 16-bit A/D converters designed for digitizing high frequency, wide dynamic range signals. They are perfect for demanding communications applications with AC performance that includes 77dB SNR and 90dB spurious free dynamic range (SFDR). Ultralow jitter of 0.07psRMS allows undersampling.
AD9653 : Quad, 16-Bit, 125 MSPS Serial LVDS 1.8 V Analog-to-Digital Converter The AD9653 is a quad, 16-bit, 125 MSPS analog-to-digital converter (ADC) with an on-chip sample-and-hold circuit designed for low cost, low power, small size, and ease of use. The product operates at a conversion rate of up to 125 MSPS and is optimized for outstanding dynamic performance.