|
Details, datasheet, quote on part number:DK1001
| |
Datasheet text preview:
DK1001
Introduction The Remote Keyless Entry System Evaluation Kit is designed to allow the user to easily and quickly demonstrate the operation of the RF2516 and RF2919 in a typical application. Everything needed to demonstrate a one way link is included in the kit. The devices are setup to demonstrate a typical keyless entry system using a rolling code encoder and decoder while operating at 433MHz. Batteries are included and antennas are printed on the circuit boards. This kit most accurately demonstrates a keyless entry application, although these devices are suitable for a variety of applications including wireless security systems and other remote control applications. The kit includes technical information on the RF2516 and the RF2919 along with applications information. Also included are the schematics, layouts, and bills of material for the demonstration boards. Electronic versions of these documents are available on the Internet at www.rfmd.com. Remote Keyless Entry System Evaluation Kit Contents The Remote Keyless Entry System Evaluation Kit contains the following items: · · · · · · · Keyless Entry Demonstration Transmitter Keyless Entry Demonstration Receiver 9V battery for receiver 3V battery for transmitter Evaluation Kit, Transmitter, and Receiver Data Sheets RF2516 Transmit IC Data Sheet RF2919 Receive IC Data Sheet In a typical environment, this transmitter and receiver pair should operate over a distance of 50feet to 100 feet. A greater distance may be observed when using the transmitter with receivers having more appropriate antennas. The printed antenna used in the demonstration receiver is very convenient, but not very efficient from an electrical perspective. This kit is intended for evaluation purposes only. RF Micro Devices, Inc. expressly disclaims all warranties, either express or implied, including the implied warranties of fitness for a particular purpose and merchantability, with respect to the use of this design material in connection with the design of any product or the use of any such product. RF Micro Devices, Inc. also disclaims all responsibility for any actual, direct, indirect, special, consequential or incidental damages incurred by any person resulting from any error or defect in or misuse of this circuit design and any related specifications or information.
DK1001 RF2607, RF2609:
13
TECHNICAL NOTES AND ARTICLES
Rev A0 000330
13-155
DK1001
13
TECHNICAL NOTES AND ARTICLES
13-156
Rev A0 000330
|
|
