Details, datasheet, quote on part number: RH5RH701A-T1
PartRH5RH701A-T1
Category
DescriptionPWM Step-up Dc/dc Converter
CompanyRicoh Corporation
DatasheetDownload RH5RH701A-T1 datasheet
  

 

Features, Applications

The 2B/ 3B Series are PWM Step-up DC/DC converter ICs by CMOS process. The 1A IC consists of an oscillator, a PWM control circuit, a driver transistor (Lx switch), a reference voltage unit, an error amplifier, a phase compensation circuit, resistors for voltage detection, a soft-start circuit, and an Lx switch protection circuit. A low ripple, high efficiency step-up DC/DC converter can be constructed of this 1A IC with only three external components, that is, an inductor, a diode and a capacitor. These 2B/ 3B ICs can achieve ultra-low supply current (no load) TYP. 15A by a newly developed PWM control circuit, equivalent to the low supply current of a VFM (chopper) Step-up DC/DC converter. Furthermore, these ICs can hold down the supply current to TYP. 2A by stopping the operation of the oscillator when the input voltage > (the output voltage set value + the dropout voltage by the diode and the inductor). These 2B/ 3B Series ICs are recommendable to the user who desires a low ripple PWM DC/DC converter, but cannot adopt a conventional PWM DC/DC converter because of its too large supply current. The 2B/ 3B Series ICs use the same chip as that employed in the 1A IC and are provided with a drive pin (EXT) for an external transistor. Because of the use of the drive pin (EXT), an external transistor with a low saturation voltage can be used so that a large current can be caused to flow through the inductor and accordingly a large output current can be obtained. Therefore, these 2B/ 3B Series ICs are recommendable to the user who need a current as large as several tens mA to several hundreds mA. The 3B IC also includes an internal chip enable circuit so that it is possible to set the standby supply current at MAX. 0.5A. These 2B/ 3B ICs are suitable for use with battery-powered instruments with low noise and low supply current.

FEATURES

Small Number of External Components..........Only an inductor, a diode and a capacitor (RH5RH 1A) Low Supply Current...........................................TYP. 15A (RH5RH301A) Low Ripple and Low Noise Low Start-up Voltage (when the output current 1mA)..................MAX. 0.9V High Output Voltage Accuracy..........................2.5% High Efficiency...................................................TYP. 85% Low Temperature-Drift Coefficient of Output Voltage......................TYP. 50 ppm/C Soft-Start.............................................................MIN. 500s Small RH5RH 2B),

APPLICATIONS

Power source for battery-powered equipment. Power source for cameras, camcorders, VCRs, PDAs, electronic data banks,and hand-held communication

Power source for instruments which require low noise and low supply current, such as hand-held audio equip-

Power source for appliances which require higher cell voltage than that of batteries used in the appliances.

Lx Vss LxSW PWM control EXT OSC Chip Enable + Error Amp. VLX limiter Buffer Slow start Phase Comp. Vref OUT

Error Amp. (Error Amplifier) has a DC gain of 80dB, and Phase Comp. (Phase Compensation Circuit) provides the frequency characteristics including the 1st pole (fp=0.25Hz) and the zero point (fz=2.5kHz). Furthermore, another zero point (fz=1.0kHz) is also obtained by the resistors and a capacitor connected to the OUT pin.

In RH5RH Series, the output voltage, the driver, and the taping type for the ICs can be selected at the user's request. The selection can be made by designating the part number as shown below RH5RH Part Number b c

Description

Setting Output Voltage (VOUT): Stepwise setting with a step 0.1V in the range 7.5V is possible. Designation of Driver: 1A: Internal Lx Tr. Driver (Oscillator Frequency 50kHz) 2B: External Tr. Driver (Oscillator Frequency 100kHz) 3B: Internal Tr./External Tr. (selectively available) (Oscillator Frequency 100kHz, with chip enable function) Designation of Taping Type : Ex. T1, T2 (refer to Taping Specifications) "T1" is prescribed as a standard.

For example, the product with Output Voltage 5.0V, the External Driver (the Oscillator Frequency 100kHz) and Taping Type T1, is designated by Part Number RH5RH502B-T1.


 

Related products with the same datasheet
RH5RH701A-T2
RH5RH702B-T1
RH5RH702B-T2
RH5RH703B-T1
RH5RH703B-T2
RH5RH711A-T1
RH5RH711A-T2
RH5RH712B-T1
RH5RH712B-T2
RH5RH713B-T1
RH5RH713B-T2
RH5RH721A-T1
Some Part number from the same manufacture Ricoh Corporation
RH5RH701A-T2 PWM Step-up Dc/dc Converter
R1116N201B LOW Noise 150ma LDO Regulator
RP500X The Rp500x Series are Cmos-based Step-down Dc/dc Converters with Synchronous Rectifier.
RH5RZ24CA Power Management ICs MARK Informations
R1163N301B 3-mode 150ma LDO Regulator with the Reverse Current Protection
EPL12P6 CMOS Electrinically Programmable Logic
RQ5RW44CA The Rx5rw Series are Cmos-based Voltage Regulator ICs with high Accuracy Output Voltage and Ultra-low
R1234D121A Pwm/vfm Step-down Dc/dc Converter with Synchronous Rectifier
Same catergory

CMY82 : . Preliminary Data Sheet GaAs receiver front-end for cellular CDMA applications Adjustable gain control RF amplifier with 20 dB dynamic range Low LO-power demand of typ. 10 dBm with 2 LO buffer stages Optional or 2 LO-buffer stages Flat leadless 3.5 mm2 SMT plastic package RF-frequency range: - 1.0 GHz Operating voltage range: 5 V Total current consumption:.

GMA3688C : High Efficiency Red Red/green (Bi-Color) 1.5 Inch (37.9 Mm) 8 X 8 Dot Matrix Stick Display.

HE83144 : LCD MCU. LCD Dots = 1024~768 ;; Reg. = -- ;; LCD Type = i ;; ROM = 64K ;; RAM = 256 ;; I/o = 8~24 ;; Vo = ;; PWM = ;; Op = -- ;; Dao = -- ;; Timer(16-bits) = T1,T2,TB ;; WDT = -- ;; DTMF = -- ;; Remark =.

TK11851L : Panel Driver. Panel Capacitance = White Led Driver DC-DC Step-up Converter ic ;; Package = SOT23L-8.

REF05SM : +5V Precision Voltage Reference (guaranteed Long-term Stability). +5V Precision VOLTAGE REFERENCE (Guaranteed Long-Term Stability) q OUTPUT VOLTAGE: +5V 0.1% max q GUARANTEED LONG-TERM STABILITY: 25ppm/1000 hrs max q EXCELLENT TEMPERATURE STABILITY: 8.5ppm/C max +125C) q LOW NOISE: 10Vp-p typ 10Hz) q EXCELLENT LINE REGULATION: 0.008%/V max q EXCELLENT LOAD REGULATION: 0.005%/mA max q LOW SUPPLY CURRENT: 1.4mA.

BGY284 : Power Amplifier with Integrated Control loop for Gsm850, Egsm900, Dcs1800 & Pcs1900.

14-506.0250 : SWITCH, SELECTOR, SPDT, 5A, 250V.

445287-1 : Backplane - Accessory Connectors, Interconnect Guide Pin; CONN GROUND GUIDE POST. s: Accessory Type: Guide Pin ; For Use With/Related Products: HDI and TBC Series ; s: - ; Packaging: Bulk ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

CA3100E22-23SBF80F0 : Aluminum, Olive Drab Cadmium Plated Panel Mount, Flange Circular - Housing Connectors, Interconnect Receptacle for Female Contacts; CONN HSG RCPT 8POS WALL MNT SKT. s: : Strain Relief ; Packaging: Bulk ; Connector Type: Receptacle for Female Contacts ; Mounting Type: Panel Mount, Flange ; Shell Size - Insert: 22-23 ; Contact Type: Crimp ; Fastening.

MS3101E22-14P : Aluminum, Olive Drab Cadmium Plated Free Hanging (In-Line) Circular Connectors, Interconnect Receptacle, Male Pins; CONN RCPT 19 POS FREE HNG W/PINS. s: Connector Type: Receptacle, Male Pins ; Shell Size - Insert: 22-14 ; Mounting Type: Free Hanging (In-Line) ; Fastening Type: Threaded ; : Strain Relief ; Packaging: Bulk ; Number of Positions: 19 ; Termination:.

DF36014GFPWV : Embedded - Microcontroller Integrated Circuit (ics) Internal Tray 3 V ~ 5.5 V; MCU 3/5V 32K I TEMP PB-FREE 64LQ. s: Program Memory Size: 32KB (32K x 8) ; RAM Size: 2K x 8 ; Number of I /O: 30 ; Package / Case: 64-LQFP ; Speed: 20MHz ; Oscillator Type: Internal ; Packaging: Tray ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: H8/300H.

500DCBC-ACH : 250ppm Oscillator - Programmable Crystal And Oscillator; OSC PROG LVDS 3.3V 250PPM OE SMD. s: Package / Case: 6-SMD, No Lead (DFN, LCC) ; Output: LVDS ; Operating Temperature: 0C ~ 85C ; Frequency Stability: 250ppm ; Available Frequency Range: 0.9MHz ~ 200MHz ; Function: Standby (Power Down) ; Packaging: Tube ; Spread Spectrum Bandwidth: - ; Lead.

MW010C : Dc Dc Converter Power Supply - Board Mount; CONVERTER DC/DC 15V 10W OUT. s: Type: Isolated ; Number of Outputs: 1 ; Voltage - Input (Min): 36V ; Voltage - Input (Max): 75V ; Voltage - Output 1: 15V ; Voltage - Output 2: - ; Voltage - Output 3: - ; Current - Output (Max): 670mA ; Power (Watts) - Manufacture Series: 10W ; Voltage - Isolation: 500V ; Lead.

N02L83W2AT25I : Memory Integrated Circuit (ics) SRAM - Asynchronous Tray 2.3 V ~ 3.6 V; IC SRAM 2MBIT 70NS 32TSOP. s: Memory Type: SRAM - Asynchronous ; Memory Size: 2M (256K x 8) ; Speed: 70ns ; Interface: Parallel (Byte-wide) ; Package / Case: 32-TFSOP (0.724", 18.40mm Width) ; Packaging: Tray ; Voltage - Supply: 2.3 V ~ 3.6 V ; Operating Temperature: -40C ~ 85C.

1879028-6 : 324K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 324K OHM 1/10W 0.1% 0805. s: Resistance (Ohms): 324K ; Power (Watts): 0.1W, 1/10W ; Tolerance: 0.1% ; Packaging: Bulk ; Composition: Thin Film ; Temperature Coefficient: 10ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

KK3A36U-2N : ALUMINUM ALLOY, TIN FINISH, RING TERMINAL. s: Terminal Type: Ring Terminal ; Material: Aluminum ; North American: 2 AWG.

2643000201 : 1 FUNCTIONS, FERRITE BEAD. s: Devices in Package: 1 ; Standards and Certifications: RoHS.

62659-22RRQ : 136 CONTACT(S), MALE, RIGHT ANGLE PCMCIA CONNECTOR, SURFACE MOUNT. s: Connector Type: PCMCIA CONNECTOR ; Gender: Male ; Termination Types: PCBSolder ; Number of Contacts: 136.

935162810118 : LV/LV-A/LVX/H SERIES, ASYN NEGATIVE EDGE TRIGGERED 4-BIT UP BINARY COUNTER, PDSO14. s: Counter Type: BINARY COUNTER ; Counter Category: Asynchronous ; Counter Direction: UP ; Supply Voltage: 3.3V, 3.6V, 1 ; Package Type: 3.90 MM, PLASTIC, MS-012AB, SOT-108-1, SO-14 ; Logic Family: CMOS, LV/LV-A/LVX/H ; Number of Pins: 14 ; Number of Stages (Bits): 4 bits.

1415 : Bench Top Power Supplies Dual Output DC Power Supply 30V/3A. Global Specialties 1415 Dual Output DC Power Supply provides up to 30V at 3A with dual independent outputs(the fixed output produces 5V at 3A). The 1415 Dual Output DC Power Supply responds to load condition changes with automatic crossover between the constant current and constant voltage.

 
0-C     D-L     M-R     S-Z