|
Details, datasheet, quote on part number:adc1275x_pc
| |
| Part: | adc1275x_pc |
| Category: | ASICs => Mixed Signal Cores->0.18um |
| Description: | Description = ADC1275X_PC 0.18µm 10-BIT 500KSPS ADC ;; Function = ADC ;; Configuration = 10BIT 500KSPS ;; Library Type = - ;; Characteristic = - |
| Company: | Samsung Semiconductor, Inc. |
| Datasheet: | Download adc1275x_pc datasheet File size : 49 kB |
| Request For quote: | Find where to buy adc1275x_pc
|
| |
Datasheet text preview:
ADC1275X_PC
0.18µm 10-BIT 500KSPS ADC µ
GENERAL DESCRIPTION
The ADC1275X_PC is a CMOS 3.3V 10-bit analog-to-digital converter (ADC). It converts the analog input signal into 10-bit binary digital codes at a maximum conversion rate of 500KSPS with 2.5MHz clock. The device is a recycling type monolithic ADC with an on-chip sample-and-hold function. The ADC has power down mode.
FEATURES
-- Resolution : 10-bit -- Maximum Conversion Rate : 500KSPS -- Main Clock : 2.5MHz (Max.) -- Power Supply : 3.3V ± 0.3V -- Total Current : 1uA (Standby Mode) 1.5mA (Normal Operation) -- Input Range : 0.0V 3.3V (3.3V P-P) -- Differential Linearity Error : ± 1.0 LSB (Max) -- Integral Linearity Error : ± 2.0 LSB (Max.) -- Signal to Noise & Distortion Ratio : 56dB (Typ.) -- Digital Output : CMOS Level -- Operating Temperature Range : -40 °C 85 °C
TYPICAL APPLICATIONS
-- Micom Interface -- Portable Equipment -- Low-Power Application
1
0.18µm 10-BIT 500KSPS ADC µ
ADC1275X_PC
FUNCTIONAL BLOCK DIAGRAM
AIN[7:0] SEL[2:0] STBY
ANALOG MUX
MDAC1
MDAC2
MAIN BIAS 3.3V 1.8V
VREF AGND
REF GEN FLASH1 CML GEN FLASH2
Level Shifter
CKIN STC
CLOCK GEN
DIGITAL LOGIC
DO[9:0] EOC
Ver 1.5 (Mar. 2003) No responsibility is assumed by SEC for its use nor for any infringements of patents or other rights of third parties that may result from its use. The content of this data sheet is subject to change without any notice.
2
ADC1275X_PC
0.18µ m 10-BIT 500KSPS ADC
CORE PIN DESCRIPTION
Name VREF AGND AVDD33A1 AVBB33A1 AVSS33A1 AIN[7:0] SEL[2:0] STBY I/O Type AI AI AP AG AG AI DI DI I / O Pad phia_abb phia_abb vdd3t_abb vbb3_abb vss3t_abb phiar50_abb picc_abb picc_abb Reference Top (3.3V) Reference Bottom (0.0V) Analog Power (3.3V) Analog Sub Bias (0.0V) Analog Ground (0.0V) Analog Input (Input Range : 0.0V ~ 3.3V) Analog Input Selection Pin VDD=power saving (standby), GND=normal CKIN D[9:0] EOC STC AVSS33A2 AVDD33A2 AVDD18 I/O Type Abbr. -- AI: Analog Input -- DI: Digital Input -- AO: Analog Output -- DO: Digital Output -- AP: Analog Power -- AG: Analog Ground -- DP: Digital Power -- DG: Digital Ground -- AB: Analog Bi-direction -- DB: Digital Bi-direction DI DO DO DI DG DP DP picc_abb pot4_abb pot4_abb picc_abb vss3t_abb vdd3t_abb vdd1t_abb Sampling Clock Input Digital Output End of Conversion Signal Start of Conversion Signal Digital GND (0.0V) Digital Power (3.3V) Digital Power (1.8V) Pin Description
3
0.18µm 10-BIT 500KSPS ADC µ
ADC1275X_PC
AVDD33A1
AVDD33A2
AVSS33A1
AVBB33A1
AVSS33A2
AIN[7:0]
AVDD18
adc1275x_pc
VREF AGND
[MSB:LSB] DO[9:0] EOC
SEL[2:0]
STBY
4
CKIN
STC
ADC1275X_PC
0.18µ m 10-BIT 500KSPS ADC
ABSOLUTE MAXIMUM RATINGS
Characteristic Supply Voltage Analog Input Voltage Digital Input Voltage Reference Voltage Storage Temperature Range Operating Temperature Range Symbol VDD33 AINT CKIN VREF/AGND Tstg Topr Value 3.8 VSS to VDD VSS to VDD VSS to VDD -45 to 150 -40 to 85 Unit V V V V °C °C
NOTES: 1 . Absolute maximum rating specifies the values beyond which the device may be damaged permanently. Exposure to ABSOLUTE MAXIMUM RATING conditions for extended periods may affect reliability. Each condition value is applied with the other values kept within the following operating conditions and function operation under any of these conditions i s not implied. 2. All voltages are measured with respect to VSS unless otherwise specified. 3. 100pF capacitor is discharged through a 1.5K resistor (Human body model)
RECOMMENDED OPERATING CONDITIONS
Characteristics Supply Voltage Reference Input Voltage Analog Input Voltage Operating Temperature
NOTE:
Symbol AVDD33A1 AVDD33A2 VREF AGND AINT Toper
Min 3.0 2.0 0.0 0.0 -40
Typ 3.3 3.3 0.0 VREF
Max 3.6 3.6 0.0 85
Unit V V V °C
It is strongly recommended that all the supply pins (AVDD33A1, AVDD33A2) be powered from the same source to avoid power latch-up.
DC ELECTRICAL CHARACTERISTICS
Characteristics Differential Nonlinearity Integral Nonlinearity Offset Voltage Symbol DNL INL TOPOFF BOTOFF Min Typ ± 0.8 ± 1.0 3 Max ±1 ±2 8 Unit LSB LSB LSB Test Conditions VREF=3.3V AGND=0.0V VREF=3.3V AGND=0.0V VREF=3.3V AGND=0.0V
(Converter Specifications : AVDD33A1=AVDD33A2=3.3V, AVDD18=1.8V, AVSS33A1=AVSS33A2=0V, Toper=25 °C, VREF=3.3V, AGND=0.0V unless otherwise specified)
5
|
|
