|
|
Part: 2SK1067
Category:
Discrete
-> Transistors
-> FETs (Field Effect Transistors)
-> MOSFETs
Description: N-channel MOS Silicon Fet, FM Tuner, VHF-band Amp Application
Company: Sanyo Semiconductor Corporation
Datasheet: Download 2SK1067 datasheet File size : 215 kB
Request For quote: Find where to buy 2SK1067
Datasheet text preview:
Ordering number:EN2719
N-Channel Silicon MOSFET
2SK1067
FM Tuner, VHF-Band Amplifier Applications
Features
· Low noise NF=1.8dB typ (f=100MHz). · High power gain PG=27dB typ (f=100MHz). · Small reverse transfer capacitance Crss=0.035pF (VDS=10V, f=1MHz). · Ultrasmall-sized package (MCP) permitting 2SK1067-applied sets to be made smaller and slimmer.
Package Dimensions
unit:mm 2057
[2SK1067]
0.425
0.15 3
2.1 1.250
0 to 0.1
0.425
1 2 0.65 0.65 2.0
0.3 0.9
0.6
0.2
0.3
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDS VGS ID PD Tch Tstg Conditions
1 : Gate 2 : Drain 3 : Source SANYO : MCP
Ratings 16 ±5 30 150 125 55 to +125
Unit V V mA mW
°C °C
Electrical Characteristics at Ta = 25°C
Parameter Drain-to-Source Voltage Gate-to-Source Leakage Current Zero-Gate Voltage Drain Current Cutoff Voltage Forward Transfer Admittance Input Capacitance Reverse Transfer Capacitance Symbol VDSX IGSS IDSS VGS(off) | yfs | Ciss Crss Conditions VGS=4V, ID=100µA VDS=0V, VGS=±5V VDS=10V, VGS=0 VDS=10V, ID=100µA VDS=10V, VGS=0, f=1kHz VDS=10V, VGS=0, f=1MHz VDS=10V, VGS=0, f=1MHz Ratings min 16 10 1.2* 11 2.3 0.035 12.0* 2.5 typ max Unit V nA mA V mS pF pF
* : The 2SK1067 is classified by IDSS as follows (unit : mA) :
1.2 3 3.0 2.5 4 6.0 5.0 5 12.0
Continued on next page.
(Note) Marking : CJ IDSS rank : 3, 4, 5
Any and all SANYO products described or contained herein do not have specifications that can handle a p p l i c a t i o n s that require extremely high levels of reliability, s u c h as life-support systems, a i r c r a f t ' s c o n t r o l systems, o r other applications whose failure can be reasonably expected to result in serious p h y s i c a l and/or material damage. Consult with your SANYO representative nearest you before using a n y SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other p a r a m e t e r s ) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
51099TH (KT)/N158MO, TS No.27191/5
2SK1067
Continued from preceding page.
Parameter Power Gain Noise Figure Symbol PG NF Conditions VDS=10V, VGS=0, f=100MHz, See specified Test Circuit VDS=10V, VGS=0, f=100MHz, See specified Test Circuit Ratings 27 1.8 3.0 Unit dB dB
PG, NF Specified Test Circuit
No.27192/5
2SK1067
No.27193/5
2SK1067
No.27194/5
2SK1067
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all s e m i c o n d u c t o r products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. I n the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, s u c h products must not be expor t e d without obtaining the expor t license from the authorities c o n c e r n e d in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or m e c h a n i c a l , including photocopying and recording, or any information storage or retrieval system, o r otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. I n f o r m a t i o n (including circuit diagrams and circuit parameters) herein is for example only ; it is not g u a r a n t e e d for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of May, 1999. Specifications and information herein are subject to change without notice.
PS No.27195/5
Others parts begin by 2s
2S-1 2S-2 2S-3 2S-4 2S-5 2S-6 2S-7 2S-8 2S-9 2S-10 2S-11 2S-12 2S-13 2S-14 2S-15 2S-16 2S-17 2S-18 2S-19 2S-20 2S-21 2S-22 2S-23 2S-24 2S-25 2S-26 2S-27 2S-28 2S-29 2S-30 2S-31 2S-32 2S-33 2S-34 2S-35 2S-36 2S-37 2S-38 2S-39 2S-40 2S-41 2S-42 2S-43 2S-44 2S-45 2S-46 2S-47 2S-48 2S-49
|
|
|
