|
|
Part: CPH3201
Category:
Discrete
-> Transistors
-> Bipolar
-> General Purpose
Description: DC-DC Converter, Strobe (NPN), Package : CPH3
Company: Sanyo Semiconductor Corporation
Datasheet: Download CPH3201 datasheet File size : 704 kB
Request For quote: Find where to buy CPH3201
Datasheet text preview:
Ordering number:EN6006
PNP/NPN Silicon Epitaxial Planar Transistors
CPH3101/3201
DC/DC Converter Applications
Applications
· Relay drivers, lamp drivers, motor drivers, strobes.
Package Dimensions
unit:mm 2150
[CPH3101/3201]
2.9 0.4
0.6 0.2
Features
· Adoption of FBET and MBIT processes. · High current capacitance. · Low collector-to-emitter saturation voltage. · High-speed switching. · Ultrasmall-sized package permitting applied sets to be made small and slim. · High allowable power dissipation.
3
0.15
0 to 0.1
1.6 2.8
1 1.9
2
0.6
0.2
1 : Base 2 : Emitter 3 : Collector SANYO : CPH3
( ) : CPH3101
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg
Mounted on a ceramic board (600mm2×0.8mm)
Conditions
0.7 0.9
Ratings ()30 ()30 ()6 ()2 ()4 ()400 0.9 150 55 to +150
Unit V V V A A mA W
°C °C
Electrical Characteristics at Ta = 25°C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Symbol ICBO IEBO hFE fT Cob VCE(sat) VBE(sat) VCB=()20V, IE=0 VEB=()3V, IC=0 VCE=()2V, IC=()100mA VCE=()10V, IC=()50mA VCB=()10V, f=1MHz IC=()1.5A, IB=()75mA IC=()1.5A, IC=()75mA 200 150 19(32) 180 (350) ()0.85 400 (600) ()1.2 Conditions Ratings min typ max ()0.1 ()0.1 400 MHz pF mV mV V Unit µA µA
Marking : CPH3101 : AA, CPH3201 : CA
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle a p p l i c a t i o n s that require extremely high levels of reliability, s u c h as life-support systems, a i r c r a f t ' s c o n t r o l systems, o r other applications whose failure can be reasonably expected to result in serious p h y s i c a l and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other p a r a m e t e r s ) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
40599TS (KOTO) TA-1594 No.60061/4
CPH3101/3201
Continued from preceding page.
Parameter Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Turn-OFF Time Symbol V(BR)CBO IC=()10µA, IE=0 V(BR)CEO IC=()1mA, RBE= V(BR)EBO IC=()10µA, IC=0 ton tstg tf See specified test circuit. See specified test circuit. See specified test circuit. Conditions Ratings min ()30 ()30 ()6 60(60) 500 (350) 25(25) typ max Unit V V V ns ns ns ns
Switching Time Test Circuit
PW=20µs DC1% INPUT 1k VR 50
+
IB1 IB2 OUTPUT
RL 100µF 470µF
+
VBE=5V VCC=12V 20IB1=20IB2=IC=500mA (For PNP, the polarity is reversed.)
-2.0 -1.8
I C - VCE
CPH3101
100mA 150mA 200mA
A
0m
5
Collector Current, IC A
Collector Current, IC A
-1.6 -1.4 -1.2 -1.0 -0.8 -0.6 -0.4 -0.2 0 0
1.6 1.4
40m
A
30
4
m
0m
A
A 0mA 0m 2 3
2.0 1.8
I C - VCE
A 20m
CPH3201
A
0mA
10mA
8mA
6mA
10mA
A
25
1.2 1.0 0.8
50m
8.0mA
6.0mA
4mA 2mA
4.0mA
0.6 0.4 0.2
2.0mA
IB=0
-200 -400 -600 -800 -1000
0 0
IB=0
200 400 600 800 1000
Collector-to-Emitter Voltage, VCE mV
3.2 2.8
Collector-to-Emitter Voltage, VCE mV
1000 7 5
I C - VBE
CPH3101/3201 VCE =2V For PNP, minus sign is omitted.
hFE - I C
CPH3101/3201 VCE =2V For PNP, minus sign is omitted.
Collector Current, IC A
CPH3201
DC Current Gain, hFE
2.4 2.0 1.6 1.2 0.8 0.4 0 0
3 2
CPH3101
CPH3201
3101
CPH
100 7 5 3 2 10 0.01
0.2
0.4
0.6
0.8
1.0
1.2
2
3
5 7 0.1
2
3
5 7 1.0
2
3
5 7 10
Base-to-Emitter Voltage, VBE V
Collector Current, IC A
No.60062/4
CPH3101/3201
1000
fT - IC
Output Capacitance, Cob pF
CPH3101/3201 VCE =10V For PNP, minus sign is omitted. CPH3201 CPH3101
2
Cob - VCB
CPH3101/3201 f=1MHz For PNP, minus sign is omitted.
Gain Bandwidth Product, f T MHz
7 5 3 2 100 7 5 3 2 10 10
100 7 5
3 2
CPH 310 1
CPH
320
1
2
3
5 7 100
2
3
5
7 1000
2
3
5
10 1.0
2
3
5
7
10
2
3
5
7
100
Collector Current, IC mA
5
Collector-to-Base Voltage, VCB V
7 5 ICP 3 2 1.0 7 5 3 2 0.1 7 CPH3101/3201 Ta=25°C 5 Single pulse 3 For PNP, minus sign is omitted. 2 2 Mounted on a ceramic board (600mm ×0.8mm) 23 5 7 1.0 23 5 7 10 2
VCE(sat) - I C
CPH3101/3201 IC=IB=10 For PNP, minus sign is omitted.
ASO
µs 100
10
10
Collector-to-Emitter Saturation Voltage, VCE (s a t) V
3 2 1.0 7 5 3 2 0.1 7 5 3 2 5 7 0.01 2 3 5 7 0.1 2 3
Collector Current, IC A
IC
50
m
s
s 0µ
s 1m
DC
0m
s
op
era
tio
n
CP
H3
1 10
1 20
CP
H3
0.01
5 7 1.0
2
3
5
3
5
7
Collector Current, IC A
1.2
Collector-to-Emitter Voltage, VCE V
CPH3101/3201
PC -
Ta
Collector Dissipation, PC W
1.0
0.9
M
0.8
ou
nte
do
na
ce
0.6
ram
ic
bo
ard
(6
0.4
00
mm
2
0.2
×0 .8m m)
0 0
20
Ambient Temperature, Ta °C
40
60
80
100
120
140
160
No.60063/4
CPH3101/3201
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all s e m i c o n d u c t o r products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. I n the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, s u c h products must not be expor t e d without obtaining the expor t license from the authorities c o n c e r n e d in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or m e c h a n i c a l , including photocopying and recording, or any information storage or retrieval system, o r otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. I n f o r m a t i o n (including circuit diagrams and circuit parameters) herein is for example only ; it is not g u a r a n t e e d for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of April, 1999. Specifications and information herein are subject to change without notice.
PS No.60064/4
Others parts begin by cp
CP-1 CP-2 CP-3 CP-4 CP-5
|
|
|
