|Category||Analog & Mixed-Signal Processing|
|Description||af Power Amplifier (40W + 40W)|
|Company||Sanyo Semiconductor Corporation|
|Datasheet||Download STK4171V datasheet
STK4171V AF Power Amplifier (Split Power Supply) + 40W min, THD = 0.08%)
Pin-compatible with the STK4102II series. The STK4101V series use the same package and are available for output to 50W. Built-in muting circuit to cut off various kinds of pop noise Greatly reduced heat sink due to substrate temperature 125°C guaranteed Distortion 0.08% due to current mirror circuit Excellent cost performanceSpecifications
Parameter Maximum supply voltage Thermal resistance Junction temperature Operating substrate temperature Storage temperature Available time for load short-circuit Symbol VCC max j-c Tj Tc Tstg ts *1 VCC = 40W Conditions Ratings +125 2 Unit V °C/W °C s
Parameter Recommended supply voltage Load resistance Symbol VCC RL Conditions Ratings ±32.5 8 Unit VSANYO Electric Co., Ltd. Semiconductor Business Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
Parameter Quiescent current Symbol ICCO PO (1) Output power PO (2) Total harmonic distortion Frequency response Input impedance Output noise voltage Neutral voltage Muting voltage THD fL, fH ri VNO VN VM Conditions VCC = ±39V THD to 20kHz VCC = ±28V, THD = 1kHz VCC = 10k VCC to 50k min typ 40 max 100 Unit Hz k mVrms mV V
For power supply at the time of test, use a constant-voltage power supply unless otherwise specified. *1 For measurement of the available time for load short-circuit and output noise voltage, use the specified transformer power supply shown right. *2 The output noise voltage is represented by the peak value on rms scale (VTVM) of average value indicating type. For AC power supply, use an AC stabilized power supply (50Hz) to eliminate the effect of flicker noise in AC primary line.Sample Printed Circuit Pattern for Application Circuit (Cu-foiled side)
|Some Part number from the same manufacture Sanyo Semiconductor Corporation|
|STK4171X 2-channel af Power Amp|
|STK4180MK2 2ch./1packge, +- Power Supply 6w/ch. ~ 100w/ch. Thd=0.4%|
|STK4180MK5 2ch./1packge, +- Power Supply 6w/ch. ~ 100w/ch. Thd=0.08%|
|STK4181V af Power Amplifier (45W + 45W)|
|STK4181X 2ch./1packge, +- Power Supply Built-in Muting Circuit 25w/ch. ~ 70w/ch. Thd=0.02%|
|STK4190MK2 2ch./1packge, +- Power Supply 6w/ch. ~ 100w/ch. Thd=0.4%|
AD1890 : Sampleport Stereo Asrc For 18 And 20 Bit Applications. Automatically Sense Sample Frequencies--No Programming Required Tolerant of Sample Clock Jitter Smooth Transition When Sample Clock Frequencies Cross Accommodate Dynamically Changing Asynchronous Sample Clocks 8 kHz to 56 kHz Sample Clock Frequency Range to 2:1 Ratio Between Sample Clocks 106 dB THD+N at 1 kHz 120 dB Dynamic Range (AD1890) Optimal.
HT9202D : 1-memory/2-memory Tone/pulse Dialer.
LM158 : Low Power Dual Operational Amplifiers. The 532/358/LM2904 consists of two independent, high gain, internally frequency-compensated operational amplifiers internally frequency-compensated operational amplifiers designed specifically to operate from a single power supply over a wide range of voltages. Operation from dual power supplies is also possible, and the low power supply current drain.
LT1490 : LT1490, Dual Micropower Rail-to-rail Input And Output op Amp. LT1490/LT1491 Dual and Quad Micropower Rail-to-Rail Input and Output Op Amps Rail-to-Rail Input and Output Single Supply Input Range: to 44V Micropower: 50µA/Amplifier Max MSOP Package Specified 3V, 5V and ± 15V Supplies High Output Current: 20mA Output Drives 10,000pF with Output Compensation Reverse Battery Protection 18V No Supply Sequencing Problems.
LT6011 : LT6011, Dual 135uA, 14nV/rtHz Rail-to-rail Output Precision op Amp. 75µV Maximum Offset Voltage 900pA Maximum Input Bias Current 135µA Supply Current per Amplifier Rail-to-Rail Output Swing 120dB Minimum Voltage Gain, ±15V 0.8µV/°C Maximum VOS Drift 14nV/Hz Input Noise Voltage 0.4µV/Month Long-Term VOS Stability to ±18V Supply Voltage Operation Space Saving × 3mm DFN Package Operating Temperature Range: to 85°C The LT®6011.
LTC1040 : LTC1040, Dual Micropower Comparator. Micropower 1.5µW (1 Sample/Second) Power Supply Flexibility Single Supply to 16V Split Supply ± 8V Guaranteed Max Offset 0.75mV Guaranteed Max Tracking Error Between Input Pairs ± 0.1% Input Common Mode Range to Both Supply Rails TTL/CMOS Compatible with 5V or Single 5V Supply Input Errors are Stable with Time and Temperature The is a monolithic CMOS.
MC33285D : Power Pre-Drivers. MC33285 Automotive Dual High Side Tmos Driver. Automotive Dual High Side TMOS Driver The is a dual high side TMOS driver designed for use in the harsh automotive switching applications. The purpose of the is to drive two power n-channel FETs in a high side application with an inductive load. The application in an automotive environment requires the capability of withstanding high voltages and load.
MSK171 : High Power Dual Operational Amplifier. 4707 Dey Road Liverpool, N.Y. 13088 Low Cost Wide Supply Voltage Range: to 40V High Output Current: 3A Minimum High Efficiency: at 2.5A Internal Current Limit Wide Common Mode Range (Includes Negative Supply Voltage) Low Distortion Internal Output Snubbers for Ultra-Stable Operation The MSK is a high power dual operational amplifier. Each amplifier.
PGA206P : High-speed Programmable Gain Instrumentation Amplifier. q DIGITALLY PROGRAMMABLE GAINS: 10V/V q TRUE INSTRUMENTATION AMP INPUT q FAST SETTLING: 0.01% q FET INPUT: = 100pA max q INPUT PROTECTION: ±40V q LOW OFFSET VOLTAGE: 1.5mV max q 16-PIN DIP, SOL-16 SOIC PACKAGES The PGA206 and PGA207 are digitally programmable gain instrumentation amplifiers that are ideally suited for data acquisition systems. The PGA206.
TDA4817 : Power. Power Factor Controller. IC for High Power Factor and Active Harmonic Filtering Advance Information IC for sinusoidal line-current consumption Power factor approaching 1 Controls boost converter as an active harmonics filter Direct drive of SIPMOS transistor Zero crossing detector for discontinuous operation mode with variable frequency V AC operation without switchover q Standby.
TL071BCD : ti TL071B, Low-noise JFET-input Operational Amplifier. D Low Input Bias and Offset Currents D Output Short-Circuit Protection D Low Total Harmonic Distortion = 18 nV/Hz Typ = 1 kHz High Input Impedance. JFET Input Stage Internal Frequency Compensation Latch-Up-Free Operation High Slew Rate. 13 V/µs Typ Common-Mode Input Voltage Range Includes VCC+ The JFET-input operational amplifiers in the TL07_ series.
TS922 : Rail to Rail High Output Current Dual Op-amps. RAIL TO RAIL HIGH OUTPUT CURRENT DUAL OPERATIONAL AMPLIFIER RAIL TO RAIL INPUT AND OUTPUT LOW NOISE : 9nV/(Hz) LOW DISTORTION HIGH OUTPUT CURRENT : 80mA (able to drive 32 loads) HIGH SPEED 4MHz, 1V/µs OPERATING FROM to 12V LOW INPUT OFFSET VOLTAGE 900µVmax (TS922A) ESD INTERNAL PROTECTION : 2KV LATCH-UP IMMUNITY MACROMODEL INCLUDED IN THIS The is a RAIL.
TWL1103 : Voice-band Audio Processor (vbape). 2.7-V Operation Two Differential Microphone Inputs, One Differential Earphone Output, and One Single-Ended Earphone Output Programmable Gain Amplifiers for Transmit, Receive, Sidetone, and Volume Control Earphone Mute and Microphone Mute On-Chip I2C Bus, Which Provides a Simple, Standard, Two-Wire Serial Interface With Digital ICs Programmable for 15-Bit.
V53C16258LK35 : High Performance 3.3 Volt 256k X 16 Edo Page Mode CMOS Dynamic RAM Optional Self Refresh.
VP1608 : Quikvoice Digital Sound Chip. n Plays messages stored in external EPROM chips n CVSD technique with adjustable sampling rate from to 128K bps for different voice quality n Dual-channel audio output to 64 segments per channel n Built-in RC oscillator or use external clock Direct EPROM addressing to 8M bits Low power, single voltage operation Microprocessor interface Low-cost VP-880.