Details, datasheet, quote on part number: STK4201II
PartSTK4201II
CategoryAnalog & Mixed-Signal Processing
Description-
CompanySanyo Semiconductor Corporation
DatasheetDownload STK4201II datasheet
Quote
Find where to buy
 
  
Some Part number from the same manufacture Sanyo Semiconductor Corporation
STK4201MK2
STK4201MK5
STK4201V
STK4201V af Power Amplifier (60W + 60W)
STK4201X 2ch./1packge, +- Power Supply Built-in Muting Circuit 25w/ch. ~ 70w/ch. Thd=0.02%
STK4204MK2
STK4204MK5
STK4204V
STK4205MK2
STK4209MK5
STK4210MK2 2ch./1packge, +- Power Supply 6w/ch. ~ 100w/ch. Thd=0.4%
STK4210MK5 2ch./1packge, +- Power Supply 6w/ch. ~ 100w/ch. Thd=0.08%
STK4211II -
STK4211MK2
STK4211MK5
STK4211V 2-channel 70W af Power Amplifier
STK4211X 2ch./1packge, +- Power Supply Built-in Muting Circuit 25w/ch. ~ 70w/ch. Thd=0.02%
STK4214MK2
STK4215MK2
STK4216MK10
STK4219MK2
Same catergory

AD8041 : 160 MHZ Rail-to-rail Amplifier With Disable. Fully Specified for +5 V, and 5 V Supplies Output Swings Rail to Rail Input Voltage Range Extends 200 mV Below Ground No Phase Reversal with Inputs 1 V Beyond Supplies Disable/Power-Down Capability Low Power 5 V) High Speed and Fast Settling V: 160 MHz 3 dB Bandwidth +1) 160 V/s Slew Rate 30 ns Settling Time to 0.1% Good Video s (RL = +2) Gain Flatness.

BDW24C : Hammer Drivers, Audio Amplifiers Applications. Absolute Maximum Ratings TC=25C unless otherwise noted Symbol VCBO Parameter Collector-Base Voltage : BDW24C VCEO Collector-Emitter Voltage : BDW24C Emitter-Base Voltage Collector Current (DC) *Collector Current (Pulse) Base Current Collector Dissipation (TC=25C) Junction Temperature Storage Temperature C Value Units * Collector-Emitter Saturation.

HFA1102 : 600mhz Current Feedback Amplifier With Compensation Pin. 600MHz Current Feedback Amplifier with Compensation Pin Compensation Pin for Bandwidth Limiting Low Distortion -56dBc -3dB Bandwidth. 600MHz Very Fast Slew Rate. 2000V/s Fast Settling Time (0.1%). 11ns Excellent Gain Flatness (30MHz). 0.01dB High Output Current. 60mA Overdrive Recovery. <10ns [ /Title amplifier featuring a compensation pin for bandwidth.

HI-8573 : CMOS Quad Op-amp. The HI-8573, HI-8574 and HI-8575 devices are designed using low power CMOS technology. The operating current is externally programmable with a resistor to give the optimum tradeoff between power dissipation and slew rate. The operational amplifiers are internally compensated. All three versions offer a high degree of versatility and are well suited.

LC75383E : Electronic Voleme Control For Car Stereo System. The is an electronic volume control that provides volume, balance, fader, bass/treble, input switching and input level controls. The LC75383E supports all these functions while requiring a minimum number of external components. Volume: 79 dB (in 1 dB steps) and ; 81 positions. A balance function can be implemented using the LC75383E independent left.

OPA2343 : . SINGLE-SUPPLY, RAIL-TO-RAIL OPERATIONAL AMPLIFIERS microAmplifier TM Series APPLICATIONS q DRIVING A/D CONVERTERS q PCMCIA CARDS q DATA ACQUISITION q AUDIO PROCESSING q COMMUNICATIONS q ACTIVE FILTERS q TEST EQUIPMENT The OPA343 series operates on a single supply as low as 2.5V, and input common-mode voltage range extends 500mV beyond the supply rails.

PGA207 : . q DIGITALLY PROGRAMMABLE GAINS: 10V/V q TRUE INSTRUMENTATION AMP INPUT q FAST SETTLING: 0.01% q FET INPUT: = 100pA max q INPUT PROTECTION: 40V q LOW OFFSET VOLTAGE: 1.5mV max q 16-PIN DIP, SOL-16 SOIC PACKAGES The PGA206 and PGA207 are digitally programmable gain instrumentation amplifiers that are ideally suited for data acquisition systems. The PGA206.

STK301-220 : 7-band, 2-channel Electronic Equalizer. The is a hybrid IC (HIC) for electronically controlled graphic equalizer applications and is equipped with on-chip electronic volume control for 7-band, 2channel graphic equalization, thereby permitting onetouch up-down control of all band gains. The is a hybrid IC which combines SC system and photoresist techniques with folded board construction while.

STK401-250 : 2-channel, (30W+30W) af Power Amplifier (split Power Supply). 2ch AF Power Amplifier (Split Power Supply) + 30W min, THD = 0.08%) The a 2-channel audio power amplifier IC that supports 6/3 output load impedances. It is fully pin compatible with the 3-channel output devices (STK40000 series) and 2-channel output devices (STK401-00 series). In addition, it supports 6/3 output load impedance. Pin compatible with.

TL393ID : ti TL393, Dual, General Purpose Differential Comparator. Low-Voltage and Single-Supply Operation VCC 7 V Common-Mode Voltage Range That Includes Ground The is a dual differential comparator built using a new Texas Instruments-developed bipolar process. The TL393 is intended as an enhanced alternative to the industry-standard LM393 in circuits with supply-voltage limits 7 V. The new bipolar process allows.

TLC27M4BCD : ti TLC27M4B, LinCMOS(TM) Precision Quad Operational Amplifier. Trimmed Offset Voltage: 900 V Max = 25C, VDD 5 V Input Offset Voltage Drift. Typically 0.1 V/Month, Including the First 30 Days Wide Range of Supply Voltages Over Specified Temperature Range: 16 V Single-Supply Operation Common-Mode Input Voltage Range Extends Below the Negative Rail (C-Suffix, I-Suffix Types) Low Noise. Typically 32 nV/Hz = 1 kHz Low Power.

TLV2783 : Family of 1.8 V High-speed Rail-to-rail Input/output Bl- op Amps With Shutdown.

AD5932 : Programmable Single-Scan Waveform Generator The AD5932 is a waveform generator providing a programmable frequency scan. Utilizing embedded digital processing allowing enhanced frequency control the device generates synthesized analog or digital frequency-stepped waveforms. Because frequency profiles are preprogrammed continuous write cycles are eliminated,.

OPA3693 : The OPA3693 provides an easy to use, broadband, triple, fixed-gain buffer amplifier. Depending on the external connections, the internal resistor network may be used to provide either a fixed gain of +2 video buffer or a gain of +1 or -1 voltage buffer. The OPA3693 offers a slew rate (2500V/s) and bandwidth (> 800MHz) normally associated with a much.

AD8390A : Low Power, High Output Current Differential Amplifier The AD8390A is a high output current, low power consumption differential amplifier. It is particularly well suited for the central office (CO) driver interface in digital subscriber line systems such as ADSL and ADSL2+. In full bias operation, the driver delivers 20.4 dBm output power into low resistance.

AD8275 : G = 0.2, Level Translation, 16-Bit ADC Driver The AD8275 is a G=0.2 difference amplifier that can be used to translate +/-10V signals to a +4V level. It solves the problem typically encountered in industrial and instrumentation where +/-10V signals must be interfaced to a single supply 4V or 5V ADC. The AD8275 interfaces the two signal levels, simplifying.

IP4035CX24 : 10-channel Integrated Filter Network With ESD Input Protection To IEC 61000-4-2 Level 4 The IP4035CX24 is a 10-channel RC low-pass filter array which is designed to provide filtering of undesired RF signals. In addition, the IP4035CX24 incorporates diodes to provide protection to downstream components from ElectroStatic Discharge (ESD) voltages as high.

ADG5436 : High Voltage Latch-Up Proof, Dual SPDT Switches The ADG5436 is a monolithic CMOS device containing two independently selectable single-pole/single-throw (SPDT) switches. An EN input on the LFCSP package enables or disables the device. When disabled, all channels switch off. Each switch conducts equally well in both directions when on and has an input.

 
0-C     D-L     M-R     S-Z