Details, datasheet, quote on part number: STK4201X
PartSTK4201X
CategoryPower Management => Supervisory Circuits
Description2ch./1packge, +- Power Supply Built-in Muting Circuit 25w/ch. ~ 70w/ch. Thd=0.02%
CompanySanyo Semiconductor Corporation
DatasheetDownload STK4201X datasheet
Quote
Find where to buy
 
  
Some Part number from the same manufacture Sanyo Semiconductor Corporation
STK4204MK2
STK4204MK5
STK4204V
STK4205MK2
STK4209MK5
STK4210MK2 2ch./1packge, +- Power Supply 6w/ch. ~ 100w/ch. Thd=0.4%
STK4210MK5 2ch./1packge, +- Power Supply 6w/ch. ~ 100w/ch. Thd=0.08%
STK4211II -
STK4211MK2
STK4211MK5
STK4211V 2-channel 70W af Power Amplifier
STK4211X 2ch./1packge, +- Power Supply Built-in Muting Circuit 25w/ch. ~ 70w/ch. Thd=0.02%
STK4214MK2
STK4215MK2
STK4216MK10
STK4219MK2
STK4220MK2 2ch./1packge, +- Power Supply 6w/ch. ~ 100w/ch. Thd=0.4%
STK4220MK5 2ch./1packge, +- Power Supply 6w/ch. ~ 100w/ch. Thd=0.08%
STK4221II af Power Amplifier (80W + 80W)
STK4221MK2
STK4221MK5
Same catergory

AMS2954AC-25 : 250ma Low Dropout Voltage Regulator. 3.0V, 3.3V and 5.0V Versions High Accuracy Output Voltage Extremely Low Quiescent Current Low Dropout Voltage Extremely Tight Load and Line Regulation Very Low Temperature Coefficient Current and Thermal Limiting Needs Minimum Capacitance (1 F) for Stability Unregulated DC Positive Transients to 29V Programmable Output Error Flag Warning of Voltage.

BC10 : DC Specific. High Performance Brushless DC Motor Driver. TO 100V MOTOR SUPPLY AT 10A CONTINUOUS AND 20A PEAK OUTPUT CURRENT OPERATION WITH TO 16V VCC, ALLOWING NOMINAL 15 V VCC SUPPLIES THREE PHASE FULL BRIDGE OPERATION WITH OR 4 QUADRANT PWM AUTOMATIC BRAKING WHEN USING 2 QUADRANT PWM THERMAL PROTECTION ANTI SHOOT THROUGH DESIGN 50 KHZ INTERNALLY SET PWM FREQUENCY, WHICH MAY BE LOWERED WITH EXTERNAL CAPACITORS.

BQ219XL : Monitor/Supervisory. Smart Battery Module With Led S. Complete smart battery solution for NiCd, NiMH, and Li-Ion battery packs Based on the or bq2040 Gas Gauge IC Ideal for or DR36 type packs Narrow board fits in the crevice formed by two adjacent battery packs Accurate measurement of available battery capacity Designed for battery pack integration: Measures only 3.5 (L) x 0.3 (W) inches I ncl ud aug nf ig ion EEPROM,.

CS5253B-8 : . 3.0 A LDO 2.5 V Fixed Linear Regulator for Remote Sense Applications This new very low dropout linear regulator reduces total power dissipation in the application. To achieve very low dropout, the internal pass transistor is powered separately from the control circuitry. Furthermore, with the control and power inputs tied together, this device can be used.

EZ1588CM : 2.0 Amp Low Dropout Positive Voltage Regulators. The EZ1588 series of high performance positive voltage regulators are designed for use in applications requiring low dropout performance at full rated current. Additionally, the EZ1588 series provides excellent regulation over variations in line, load and temperature. Outstanding include low dropout performance at rated current, fast transient response,.

LT1610 : SEPIC. LT1610, 0.45A, 1.7MHz, Single Cell Micropower DC/DC Converter. Uses Tiny Capacitors and Inductor Internally Compensated Low Quiescent Current: 30A Operates with VIN as Low at 30mA from a Single Cell at 200mA from 3.3V High Output Voltage Capability: to 28V Low Shutdown Current: < 1A Automatic Burst ModeTM Switching at Light Load Low VCESAT Switch: 300mA 8-Lead MSOP and SO Packages The is a micropower fixed.

PT5801A : Plug-in Power Solutions->Non-Isolated->Single Posi. ti PT5801, 3.3V 18-A, 5-V Input Adjustable Step-down Isr.

SG1526 : Regulating Pulse Width Modulator. The is a high performance monolithic pulse width modulator circuit designed for fixed-frequency switching regulators and other power control applications. Included an 18-pin dual-in-line package are a temperature compensated voltage reference, sawtooth oscillator, error amplifier, pulse width modulator, pulse metering and steering logic, and two low impedance.

SMDA05C-5 : Data & I/O Protection. 5 V 5-Line Bidirectional TVS Array.

TLV431ID : Low-voltage Adjustable Precision Shunt Regulators. Low-Voltage Operation. Down V 1% Reference-Voltage Tolerance (TLV431A) Adjustable Output Voltage, VO = Vref 6 V Low Operational Cathode Current. 80 A Typ 0.25- Typical Output Impedance Package Options Include Plastic Small-Outline (D), SOT-23 (DBV), and Cylindrical (LP) Packages The TLV431 and TLV431A are low-voltage three-terminal adjustable voltage.

TOP102YI : Three-terminal Off-line PWM Switch. Low Cost Replacement for Discrete Switchers to 50 fewer components - cuts cost, increases reliability Source-connected tab and Controlled MOSFET turn-on reduce EMI and EMI filter costs Allows for a 50% smaller and lighter solution Cost competitive with linears above to 90% Efficiency in Flyback Topology Built-in start-up and current limit reduce DC losses.

TPS60312 : . TPS60312, TPS60313 SINGLE-CELL 3-V/3.3-V, 20-mA DUAL OUTPUT, HIGH-EFFICIENCY CHARGE PUMP WITH SNOOZE MODE applications to 20-mA Output Current From to 1.8-V Input Voltage Range High Power Conversion Efficiency (up to 90%) Over Wide Output Current Range, Optimized for 1.2-V Battery Voltage Snooze Mode for Improved Efficiency at Low-Output Current Additional.

DS2780 : Stand-Alone Fuel Gauge IC The DS2780 measures voltage, temperature, and current, and estimates available capacity for rechargeable lithium-ion (Li+) and lithium-ion polymer batteries. Cell characteristics and application parameters used in the calculations are stored in the on-chip EEPROM. The available capacity registers report a conservative estimate.

CM3016 : Micropower, 4.75V/500mA Low Noise LDO CMOS Regulator The CM3016-48 is a CMOS linear voltage regulator with low quiescent current, very low drop out voltage and better than 1% initial output voltage accuracy. The quiescent current is typically 150mA at light loads and only 165mA at 500mA. This is 5% more efficient than equivalent Bi-CMOS devices that.

PT7M7823MTA : P Supervisor Circuits The PT7M7xxx family microprocessor (P) supervisory circuits are targeted to improve reliability and accuracy of power-supply circuitry in P systems. These devices reduce the complexity and number of components required to monitor power-supply and battery functions..

 
0-C     D-L     M-R     S-Z