|Category||Power Management => Supervisory Circuits|
|Description||2ch./1packge, +- Power Supply Built-in Muting Circuit 25w/ch. ~ 70w/ch. Thd=0.02%|
|Company||Sanyo Semiconductor Corporation|
|Datasheet||Download STK4211X datasheet
|Some Part number from the same manufacture Sanyo Semiconductor Corporation|
|STK4220MK2 2ch./1packge, +- Power Supply 6w/ch. ~ 100w/ch. Thd=0.4%|
|STK4220MK5 2ch./1packge, +- Power Supply 6w/ch. ~ 100w/ch. Thd=0.08%|
|STK4221II af Power Amplifier (80W + 80W)|
|STK4221V 2-channel 80W af Power Amplifier|
|STK4230MK2 2ch./1packge, +- Power Supply 6w/ch. ~ 100w/ch. Thd=0.4%|
|STK4230MK5 2ch./1packge, +- Power Supply 6w/ch. ~ 100w/ch. Thd=0.08%|
|STK4231V af Power Amplifier (100W + 100W)|
2502V0S48LN : Input Voltage = 36-75 ;; Output Voltage = 2.0 ;; Output Current = 6A.
2SC5172 : NPN Triple Diffused Type ( Switching Regulator And High Voltage Switching, High Speed DC-DC Converter Applications ).
LM317M : Three-terminal Adjustable Output Positive Voltage Regulator. The is an adjustable three-terminal positive voltage regulator capable of supplying in excess 500 mA over an output voltage range 37 V. This voltage regulator is exceptionally easy to use and requires only two external resistors to set the output voltage. Further, it employs internal current limiting, thermal shutdown and safe area compensation, making.
LMS1585A : Positive Voltage->Adjustable. LMS1585A - 5A Low Dropout Fast Response Regulators, Package: TO263, Pin Nb=3.
LT1241 : LT1241, Series, 500kHz Current-mode PWM Controllers. LT1241 Series High Speed Current Mode Pulse Width Modulators Low Start-Up Current: 250µA 50ns Current Sense Delay Current Mode Operation: To 500kHz Pin Compatible with UC1842 Series Undervoltage Lockout with Hysteresis No Cross-Conduction Current Trimmed Bandgap Reference 1A Totem Pole Output Trimmed Oscillator Frequency and Sink Current Active Pull-Down.
M62009 : General Purpose. Low Power 2-output Reset ic. LOW POWER 2 OUTPUT SYSTEM RESET IC WITH EXTERNAL INPUT As applications for microcomputers are increasing,a desire has arisen for a RAM backup function.Let us introduce Mitsubishi Electric new low power dissipation,high-performance system reset IC,which is suitable for such RAM backup. The is a low power-dissipation 2-output microcomputer system reset.
MC78LC30 : Micropower Voltage Regulator. The MC78LC00 series of fixed output low dropout linear regulators are designed for handheld communication equipment and portable battery powered applications which require low quiescent current. The MC78LC00 series an ultralow quiescent current of 1.1 µA. Each device contains a voltage reference unit, an error amplifier, a PMOS power transistor, and resistors.
MSK5231 : Linear Voltage Regulator, 3 Pin Ceramic Power Surface Mount. POSITIVE ADJUSTABLE, LOW DROPOUT SURFACE MOUNT VOLTAGE REGULATORS 4707 Dey Road Liverpool, N.Y. 13088 Hermetic Surface Mount Package Low Dropout Voltage: @ 2 Amps Adjustable Output Voltage On Board Thermal Overload Protection Short Circuit Current Limiting Output Current to 3 Amps Second Source for 0M185 Pin Compatible with the OM7628NM The MSK 5231.
SPX8863 : 120 Ma, Low Dropout Voltage Regulator. Low Noise Output LDO 1% Initial Accuracy At 120mA Very Low Quiescent Current Low Dropout Voltage Current & Thermal Limiting Reverse-Battery Protection Wide Range of Fix Output Voltages 5.0V, & ADJ Zero Off-Mode Current Small 5-Pin SOT-23 Pin Compatible to MAX8863 APPLICATIONS PDA Battery Powered Systems Cellular Phone Cordless Telephones Radio Control.
TC1413 : The TC1413/1413N Are 3A CMOS Buffer/drivers. The TC1413/TC1413N are 3A CMOS buffers/drivers. They will not latch-up under any conditions within their power and voltage ratings. They are not subject to damage when 5V of noise spiking of either polarity occurs on the ground pin. They can accept, without damage or logic upset, mA of current of either polarity being forced back into their output.
TL1454 : Dual-channel Pulse-width-modulation (pwm) Control Circuit. Two Complete PWM Control Circuits Outputs Drive MOSFETs Directly Oscillator Frequency. 50 kHz to 2 MHz to 20-V Supply-Voltage Range Low Supply Current. 3.5 mA Typ Adjustable Dead-Time Control, 100% 1.25-V Reference The is a dual-channel pulse-width-modulation (PWM) control circuit, primarily intended for low-power, dc/dc converters. Applications include.
SP1084 : The SP1084 is a series of low dropout positive voltage regulators with a maximum dropout of 1.5V at 5A of load current.The series on-chip thermal limiting which provides protection against any combination of overload and ambient temperatures that would create excessive junction temperatures. It also includes a trimmed band-gap reference and a current.
IRF6643TRPBF : : A 150V Single N-Channel HEXFET Power MOSFET in a DirectFET MZ package rated at 35 amperes optimized with low on resistance for applications such as active ORing. Shipped in Tape and Reel only. Part is not available in bulk, TR is implied in part number..
MAX5924 : 1V To 13.2V, N-Channel Hot-Swap Controllers Require No Sense Resistor The MAX5924/MAX5925/MAX5926 1V to 13.2V hot-swap controllers allow the safe insertion and removal of circuit cards into live backplanes. These devices hot swap supplies ranging from 1V to 13.2V provided that the device supply voltage, VCC, is at or above 2.25V and the hot-swapped.
MAX16976 : 28V, 600mA Automotive Step-Down Converter With Low Operating Current The MAX16976 is a 600mA current-mode step-down converter with an integrated high-side switch. The device operates with input voltages from 3.5V to 28V while using only 45ÂµA quiescent current at no load. The switching frequency is adjustable from 220kHz to 1.0MHz by using an external.