Details, datasheet, quote on part number: STK4913
PartSTK4913
CategoryPower Management
DescriptionThick Film Hybid Circuit 2-channel 50w Min af Power Amp ( Dual-supply )
CompanySanyo Semiconductor Corporation
DatasheetDownload STK4913 datasheet
Quote
Find where to buy
 
  
Some Part number from the same manufacture Sanyo Semiconductor Corporation
STK4913S
STK4913SN
STK509
STK51422A
STK51427A
STK5314
STK5315
STK5321
STK5322
STK5323
STK5324
STK5325
STK5326
STK5327
STK5330
STK5331
STK5331A
STK5332
STK5333
STK5335
STK5336
Same catergory

AD402M81RBA-5 : Low Voltage Operation is More Suitable to be Used on Battery Backup, Portable Electronic.

AD404M82RBB-5 : Low Voltage Operation is More Suitable to be Used on Battery Backup, Portable Electronic.

HI1-0222-5 : High Frequency/video Switch. The is a high frequency analog switch that complements the Harris family of high speed op amps and buffers. Fabricated with our Dielectric Isolation process and using silicon gate technology, many key parameters have been enhanced. Crosstalk and off isolation are optimized with a T-switch configuration and the use of nonconnected pins for extended shielding.

KA75420M : Voltage Detector. Detecting Against Error Operations At The Power On/off. Resetting Function For The Low Voltage Microprocessor. Checking Low Battery The KA75250/KA75270/KA75290/KA75310/KA75330/ KA75360/KA75390/KA75420/KA75450 prevents the error of system from supply voltage below normal voltage level at the time the power on and instantaneous power off in systems. Characteristic.

LTC3413 : LTC3413, 2MHz, 3A Monolithic Synchronous Regulator For Ddr/qdr Memory Termination.

M62021FP : System reset.

MTB011 : Power Ics / Solenoid/motor Drivers (MTA,MTB Series). Four output driver per package TTL/CMOS compatible inputs (High active) APPLICATION Head needle drive for printer Stepping motor drive for Output Voltage Output Current Reverse Voltage(flyback diode) Forward Current(each flyback diode) Forward Current(each common terminal) Output Current(each GND terminal) LogicSupplyVoltage LogicInputVoltage EnableInputVoltage.

PT6306N : Plug-in Power Solutions->Non-Isolated->Single Posi. ti PT6306, 1.8 Vout 3 Amp 5V-Input Adjustable Step-down Isr.

PT6443A : Plug-in Power Solutions->Non-Isolated->Single Posi. ti PT6443, 2.0Vout 6A 3.3V/5V-Input Adjustable Step-down Isr.

UC2524ADW : Voltage Mode. ti UC2524A, Advanced Regulating Pulse Width Modulators. The UC1524A family of regulating PWM ICs has been designed to retain the same highly versatile architecture of the industry standard UC1524 (SG1524) while offering substantial improvements to many of its limitations. The UC1524A Precision Reference Internally is pin compatible with "non-A" models and in most existing applications can be Trimmed to ±1% directly.

UC3726DWP : MOSFET and Power Drivers. ti UC3726, ISOlated Drive Transmitter. 750mA Output Drive, Source or Sink to 35V Operation Transmits Drive Logic and Power through Low Cost Transformer Programmable Operating Frequency to 750kHz Operation Improved Output Control Algorithm Minimizes Output Jitter Fault Logic Monitors Isolated High Side IGBT Driver UC1727 for Faults User Programmable Fault Timing Screens False Fault Signals.

ULQ2801A : Power Controllers & Motor Drivers. Eight Darlington Arrays. EIGHT DARLINGTONS PER PACKAGE EXTENDED TEMPERATURE RANGE to 105°C) OUTPUT CURRENT TO 500mA OUTPUT VOLTAGE TO 50V INTEGRAL SUPPRESSION DIODES VERSIONS FOR ALL POPULAR LOGIC FAMILIES OUTPUT CAN BE PARALLELED INPUTS PINNED OPPOSITE OUTPUTS TO SIMPLIFY BOARD LAYOUT The ULQ2801A-ULQ2805A each contain eight darlington transistors with common emitters and integral.

BQ24071 : The bq24070 and bq24071 are highly integrated Li-ion linear charger and system power-path management devices targeted at space-limited portable applications. The bq24070/1 offer DC supply (AC adapter) power-path management with autonomous power-source selection, power FETs and current sensors, high-accuracy current and voltage regulation, charge status,.

MCP1825S : 500 mA, Low Voltage, Low Quiescent Current LDO Regulator •Up to 500 mA output load current •Low dropout voltage 210 mV (typ) •Output voltage from 0.8V to 5.0V •Stable with 1.0 µF ceramic output cap •Low supply current 120 µA (typ) •DDPAK-3, TO-220-3, SOT223-3 Pb-free packages.

STTH10LCD06C : Switch (NEATSwitch) urbo2 ultrafast - high voltage rectifier for SMPS.

TPS65070 : 5-Channel Power Management IC With 3 DC/DCs, 2 LDOs In 6x6mm QFN The TPS6507x are single chip Power Management ICs for portable applications consisting of a battery charger with power path management for a single Li-Ion or Li-Polymer cell. The charger can either be supplied by a USB port on pin USB or by a dc voltage from a wall adapter connected to pin AC. Three.

EMIF03-SIM03F3 : EMI Filtering And Signal Conditioning 3-line IPAD\", EMI filter including ESD protection EMI Filtering and Signal Conditioning.

ISL78310 : High Performance 1A LDO The ISL78310 is a low dropout voltage, high-current, single output LDO specified for 1A output current. This part operates from input voltages down to 2.2V and up to 6V. The part offers fixed and external resistor adjustable output voltages from 0.8V to 5V. Custom voltage options are available upon request..

 
0-C     D-L     M-R     S-Z