|
Details, datasheet, quote on part number:GP2W0001YP-36
| |
| Part: | GP2W0001YP-36 |
| Category: | Optoelectronics => Drivers/Controllers => IInfrared/Remote Control => IrDA Devices |
| Description: | Irda 115 Kbit/s, 1 Meter Transceiver |
| Company: | Sharp Microelectronics of the Americas |
| Datasheet: | Download GP2W0001YP-36 datasheet File size : 541 kB |
| Request For quote: | Find where to buy GP2W0001YP-36
|
| |
Datasheet text preview:
GP2W0001YP/GP2W0002YP
IrDA Technical Information
Low Power Infrared Transceiver
The GP2W0002YP is the same module, and adds an integral Electro-Magnetic Interference (EMI) shield. While IR energy is inherently immune to EMI, the receiving devices themselves are not. This shield provides an additional level of protection in electromagnetically noisy environments such as PCs and other digital products. The SHARP GP2W0001YP/GP2W0002YP infrared transceiver modules contain a high speed, high efficiency, low power consumption AlGaAs LED, silicon PIN photodiode, and a low power bipolar integrated circuit. The IC contains an LED driver circuit and a receiver, providing the Rx output. IrDA data rates of 2.4 kbit/s to 115.2 kbit/s are supported at both 20 cm and one-meter distances. At the one-meter range, emitter current is approximately IF = 300 mA and in the IrDA Low Power Option communication mode IF = 27 mA. This dual mode communication capability provides wider product applications, such as a wireless data link with PCs, PDAs, or any other IrDA compliant application already on the market. The GP2W0001YP/GP2W0002YP transceiver modules may be operated over a power supply range of 2.7 V to 5.5 V without any performance degradation. T h i s provides a single part with a wide variety of design applications. For power-conscious applications, the transceiver module has a built-in Shutdown mode. This reduces the receiver's current consumption to 1 µA (MAX.) during Shutdown. The transmitter and receiver circuits are separate, allowing the transmitter LED to be driven when in Shutdown mode.
FEATURES
· IrDA 115 kbit/s Low Power Option Compatible: IF = 27 mA (TYP.) for an operating distance of 20 cm · Small Package Design for IrDA 115 kbit/s 1 meter Compliant Infrared Transceiver 8.7 (W) × 4.2 (D) × 3.15 (H) mm · Fits within Mobile Phone Connector Dimensions · Low Power Consumption and Built-in Shut-Down Mode (1 µA MAX.) · Wide Range of Operating Voltages provides power supply design flexibility (VCC = 2.7 V to 5.5 V) · Solder Reflow Compatibility for automated production processes · SMD Package allows both Vertical and Horizontal mounting on PCBs Description
DESCRIPTION
The SHARP GP2W0001YP is a standard transceiver module. Even at low operating voltages, it provides a reliable interface between logic and IR signals for through-air, serial, half-duplex IR wireless data links and is designed to satisfy IrDA physical layer specifica tio ns.
OUTLINE DIMENSIONS
The dimensions shown in Figure 1 and Figure 2 are only for design reference, and are subject to change w i t h o u t notice. The metal shield case version GP2W0002YP, (for excellent noise immunity) is shown in Figure 2. Contact your local SHARP office for the latest device specifications.
Technical Information
1
GP2W0001YP/GP2W0002YP
Low Power Infrared Transceiver
8.7 2.0 2.95 2.325 4.2
3.15
1.7
2.8 1.1 TRANSMITTER CENTER
3.6 RECEIVER CENTER
NOTES: 1. Dimensions are in mm. 2. Unspecified tolerances are ±0.3 mm. 3. Resin burrs are not included in this outline dimension drawing. 4. Package material: Visible light cut-off resin (Color: black) 5. Weight: Approximately 0.12 g 6. Pin assignment: See Figure 5 and Table 1.
3.5
2.2
0.8
0.8 1.4 7.0
0.7
4.2
GP2W0001YP-20
Figure 1. GP2W0001YP Outline Dimensions
10.2 9.2 2.95 2.325 4.2
3.4
1.7
2.8 1.1 TRANSMITTER CENTER
3.6 RECEIVER CENTER
NOTES: 1. Dimensions are in mm. 2. Unspecified tolerances are ±0.3 mm. 3. Resin burrs are not included in this outline dimension drawing. 4. Package material: Visible light cut-off resin (Color: black) 5. Weight: Approximately 0.12 g 6. Pin assignment: See Figure 5 and Table 1. 3.5
2.2
1.55
0.8
0.8 1.4 7.0
0.7
4.2
GP2W0001YP-21
Figure 2. GP2W0002YP (with Shielding Case) Outline Dimensions
2
Technical Information
0.7
Low Power Infrared Transceiver
GP2W0001YP/GP2W0002YP
Solder Paste Footprints
Figure 3 and Figure 4 are the Solder Paste footprint drawings for both parts. Note that the GP2W0002YP footprint in Figure 4 is compatible with both parts. PIN NO. 1 2
LENS (PD/LED) SIDE
Table 1. Pinouts DE S C R I P T I O N LED Anode Transmitter Data Input Shut Down Circuit Input Receiver Data Output Ground Supply Voltage SYMBOL L EDA TxD SD RxD GND VCC
3 4 5
6 1.7
5
4
3
2
1
6
0.9
0.7 P 1.4 × 5 = 7
NOTE: Viewed from the parts side of PCB.
GP2W0001YP-22
Figure 3. GP2W0001YP Soldering Footprint
PIN 1
PIN 6
LENS (PD/LED) SIDE
10 PIN 1 0.8 1.05 0.8
GP2W0001YP-28
PIN 6
Figure 5. Pin Locations
6 5 4 3 2 1
1.7
2.025
0.9
0.7 P 1.4 × 5 = 7
NOTE: Viewed from the parts side of PCB.
GP2W0001YP-23
Figure 4. GP2W0002YP Soldering Footprint
Technical Information
3
|
|
