|Company||Sharp Microelectronics of the Americas|
|Datasheet||Download PQ1MXX5M2SP datasheet
Features (1) Compact surface mount package(4.5 mm) (2) Output current : MAX. mA (3) Power dissipation : MAX. mW (4) Low power-loss (Dropout voltage: MAX. at Io=500 mA) (5) High ripple rejection (TYP.65 dB) (6) Built-in ON/OFF control function (7) Built-in overcurrent, overheat protection functions (8) Use of ceramic capacitor is possible as output smooth capacitorLarge Output Current, Compact Surface Mount Type Low Power-Loss Voltage Regulators
Applications (1) CD-ROM drives (2) DVD-ROM drives (3) Digital Still Cameras
1 Noise control terminal (Nr) 2 GND 3 ON/OFF control terminal (Vc) 5 DC input (Vin) DC output (Vo)
Parameter voltage *1 ON/OFF control terminal voltage Output current *2 Power dissipation *3 Junction temperature Operating temperature Storage temperature Soldering temperature
*1 All are open except GND and applicable terminals. *2 At surface-mounted condition *3 Overheat protection may operate at 125Tj150°C.
(Notice)In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.Specifications are subject to change without notice for improvement. (Internet)Data for Sharp's optoelectronic/power devices is provided on internet. (Address http://sharp-world.com/ecg/)
Electrical Characteristics Parameter Output voltage Load regulation Line regulation Temperature coefficient of output voltage Ripple rejection *4 Output noise voltage *4Symbol Vo RegL RegI TcVo RR Vno(rms) Vi-o Vc(on) Ic(on) Vc(off) Iq Iqs
Dropout voltage ON-state voltage for control ON-state current for control OFF-state voltage for control Quiescent current Output OFF-state dissipation current
*4 Typical value at output voltage 3.3 V type. *5 Dropout voltage when output voltage lowers 0.1V from the voltage *6 In case of opening control terminal 3 ,output voltage turns off.Output Voltage Line-up Parameter *7Output voltage Symbol VO Conditions
The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: - Personal computers - Office automation equipment - Telecommunication equipment [terminal] - Test and measurement equipment - Industrial control - Audio visual equipment - Consumer electronics (ii) Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: - Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) - Traffic signals - Gas leakage sensor breakers - Alarm equipment - Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: - Space applications - Telecommunication equipment [trunk lines] - Nuclear power control equipment - Medical and other life support equipment (e.g., scuba).
If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such SHARP devices. This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. Contact and consult with a SHARP representative if there are any questions about the contents of this publication.
|Some Part number from the same manufacture Sharp Microelectronics of the Americas|
|PQ1PD1 Primary Regulator For Switching Power Supply ( 100w Class )|
|PQ1PF1 Primary Regulator For Switching Power Supply ( 50w Class )|
|PQ1PF2 Primary Regulator For Switching Power Supply ( 30w Class )|
|PQ1PF3 Primary Regulator For Switching Power Supply|
|PQ1R18 Voltage Regulator|
|PQ1R22 Low Output Current, Low Power Loss Voltage Regulators in a Compact Surface Mount Package|
|PQ1S30 Low Power-loss Voltage Regulator|
|PQ1S30Series Low Output Current, Compact Surface Mount Type Low Power-loss Voltage Regulators|
|PQ1T181M2ZP Low Output Current, Low Power Loss Voltage Regulator in a Compact Surface Mount Package|
|PQ1X251M2ZP Low Power Loss Voltage Regulator in a Compact Package, With a Low Output Current|
|PQ1X281M2ZP Low Output Current, Low Power Loss Voltage Regulator in a Compact Surface Mount Package|
|PQ1X301M2ZP Low Power Loss Voltage Regulator in a Compact Package, With a Low Output Current|
|PQ20RX05 Low Power Loss Voltage Regulator With Variable Output And On/off Control Function|
|PQ20VZ11 Low Power Loss Voltage Regulator With Variable Output in a Surface Mount Package|
|PQ20WZ11 Low Power Loss Voltage Regulator With Variable Ooutput in a Surface Mount Package|
|PQ25VB012FZ Low Power Loss Voltage Regulator With Variable Output And a Built in Overheat Shut Down Function|
|PQ2CF1 Step up Output Chopper Regulator in a TO-220 Package|
GL1HD136 : 2mm, Forming Type, Colored Diffusion, Compact Led Lamp For Backlight/indicator
GP2W0110YPS-10 : IrDA Devices Irda 115 Kbit/s 20 CM Transceiver
LH28F640BFHE-PBTL90 : 64M Bottom Boot Block Flash
LH51V2016 : 2m SRAM: 128kx16
PC702V2NSZX : High Collector-emitter Voltage Photocoupler
PC713V6 : High ISOlation Voltage Type,general Purpose Photocoupler
PC817XP2 : High ISOlation Voltage, High Collector-emitter Vvoltage Photocoupler
GP1A19 : HIGH Sensitivity TYPE OPIC Photointerrupter
GM5BW97333A : LEDs -; LED WHITE 11500K 20MA 3.2V PLCC4 Specifications: Color: White, Cool ; Lens Style/Size: Round with Flat Top, 2.4mm ; Millicandela Rating: 5100mcd ; Voltage - Forward (Vf) Typ: 3.2V ; Wavelength - Dominant: 11500K ; Wavelength - Peak: - ; Current - Test: 20mA ; Viewing Angle: - ; Lens Type: Diffused, White ; Luminous Flux @ Current -
AD4016M168RBA-5 : Low Voltage Operation is More Suitable to be Used on Battery Backup, Portable Electronic.
AT90LS2323 : RISC->RISC. 8-bit Microcontroller. Utilizes the AVR ® Enhanced RISC Architecture AVR - High Performance and Low Power RISC Architecture 118 Powerful Instructions - Most Single Clock Cycle Execution 2K bytes of In-System Programmable ISP Flash SPI Serial Interface for Program Downloading Endurance: 1,000 Write/Erase Cycles 128 bytes EEPROM Endurance: 100,000 Write/Erase Cycles 128 bytes.
DES9157201 : 1.5ghz 10 Prescaler. High Speed Operation 15GHz Silicon Technology for Low Phase Noise (Typically Better Than at 10kHz) Very Low Power Dissipation: 150mW (Typ.) Single 5V Supply Operation High Input Sensitivity Very Wide Operating Frequency Range Available as DESC SMD - 9157201MPA The SP8830 is one of a range of very high speed low power prescalers for professional and military.
GF2918 : Dual N-channel Enhancement-mode MOSFET. Case: SO-8 molded plastic body Terminals: Leads solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 250°C/10 seconds at terminals Mounting Position: Any Weight: 0.5g Advanced Trench Process Technology High Density Cell Design for Ultra Low On-Resistance Specially Designed for Low Voltage DC/DC Converters Fast Switching for High.
A7101 : 2.4GHz FSK Transceiver The A7101 is a monolithic CMOS integrated circuit intended for use as a low cost FSK transceiver in wireless applications. The device is provided in 48-lead plastic QFN7X7 packaging and is designed to function as a complete FSK transceiver. It is intended for wireless applications in the 2.4GHz to 2.5GHz ISM band. This chip a fully.
QAK2J474JCP : Plastic FILM Capacitors. Non-inductive construction, compact size, metallized film capacitor with axial lead wires. Highly reliable with self-healing property. Minimum loss at high frequency. Tape-wrapped and epoxy endfilled at both leads for superior mechanical strength and humidity resistance. High capacitance value, offering a wide variety of applications. Adapted to the RoHS.
M34-1L : M34-1l Single Output LED Flasher IC. GENERAL The M34 series is a low voltage single output LED flashing controller IC implemented by LSI CMOS technology. With built-in RC oscillator circuit, minimal external components are required. Various flashing frequencies are available for different applications. FEATURE - Typical 3VDC operating voltage, min. 1.35V and max. 4.5V - Typical output.
V61308S : Accurate Power Surveillance and Software Monitoring. n Standby mode, maximum current µA n Reset output guaranteed for VDD voltage down to n Comparator for voltage monitoring, voltage reference n ±1.5% voltage reference accuracy °C n Programmable reset voltage monitoring n Programmable power-on reset (POR) delay n Watchdog with programmable time window guarantees a minimum time and a maximum time between.
41282 : Terminal - Wire Splice Connectors, Interconnect Crimpband, Open Band; CONN IDENTIFICATION BAND. s: Color: - ; : - ; Insulation: Non-Insulated ; Number of Wire Entries: Varies by Wire Size ; Packaging: Tape & Reel (TR) ; Terminal Type: Crimpband, Open Band ; Termination: Crimp ; Wire Gauge: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
LE A H3A-KBMA-34 : LEDs - High Brightness Power Modules Amber; LED OSTAR PROJ 6CHIP AMBER SMD. s: Color: Amber ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
SN74HC00DE4 : Logic - Gate And Inverter Integrated Circuit (ics) NAND Gate Tube 4mA, 4mA 2 V ~ 6 V; IC GATE POS-NAND QUAD 2IN 14SOIC. s: Number of Circuits: 4 ; Package / Case: 14-SOIC (0.154", 3.90mm Width) ; Logic Type: NAND Gate ; Packaging: Tube ; Mounting Type: Surface Mount ; Number of Inputs: 2 ; Current - Output High, Low: 4mA, 4mA ; Operating Temperature:.
1704033 : Through Hole Terminal Block - Wire To Board Connectors, Interconnect Through Hole; PC TERM BLOCK 1POS 10MM. s: Color: Green, Yellow ; Current: - ; : Feed Through, Interlocking (Side) ; Mating Orientation: Horizontal with Board ; Mounting Type: Through Hole ; Pitch: - ; Voltage: - ; Wire Gauge: 6-24 AWG ; Number of Levels: 1 ; Positions Per Level: 1 ; Packaging:.
SM2615JT2R20 : 2.2 Ohm 1W Chip Resistor - Surface Mount; RES 2.2 OHM 1W 5% WW 2615. s: Resistance (Ohms): 2.2 ; Power (Watts): 1W ; Tolerance: ±5% ; Packaging: Tape & Reel (TR) ; Composition: Wirewound ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
1060660300 : Fiber Optic Connectors, Interconnect; SC CONN (MMPC+ZR) 2.4MM. s: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
DMX0518H : 5000 MHz - 18000 MHz RF/MICROWAVE DOUBLE BALANCED MIXER, 8 dB CONVERSION LOSS-MAX. s: RF: 5000 to 18000 MHz ; Conversion Loss: 8 dB ; Mixer Type: Double Balanced ; Operating Temperature: -54 to 85 C (-65.2 to 185 F).
S8040N56 : 40 A, 800 V, SCR, TO-263AB. s: VDRM: 800 volts ; VRRM: 800 volts ; IT(RMS): 40 amps ; IGT: 40 mA ; Package Type: D2PAK, ROHS COMPLIANT, PLASTIC, D2PAK-3 ; Pin Count: 2.
SNS1P6QS : RF CONNECTOR. s: Applications: RF and Microwave Connectors. 78621071506 Classic Snap-N-Seal F Male Compression Connectors for Series 6 Quad Coaxial Cable Active Easy and quick to install - the "Snap" says it's sealed. May be used for indoor or outdoor applications. Cable TV, Satellite, Datacom, A/V, Security Classic NiTin Plated Brass Coaxial 6 Quad Yes Violet 0.191 0.315 Thread Protectors, Nut Seals, Security.
1906571000 : 4 CONTACT(S), PUR/PVC, MALE, CIRCULAR CONNECTOR. s: Gender: Male ; Mounting Style: CableEnd ; Number of Contacts: 4.