Details, datasheet, quote on part number: S-8337ABCA-T8T1
PartS-8337ABCA-T8T1
CategoryPower Management and Supplies => IC Voltage Regulators => IC Switching Voltage Regulators => 7612465
Title0.16 A SWITCHING CONTROLLER, 1246.3 kHz SWITCHING FREQ-MAX, PDSO8
Description
CompanySeiko Instruments
DatasheetDownload S-8337ABCA-T8T1 datasheet
Specifications 
Configuration / FunctionSINGLE
Package TypeOther, LEAD FREE, SON-8
Life Cycle StageACTIVE
IOUT0.1600 amps
VIN3.3 volts
fsw1246 kHz
Operating Temperature-40 to 85 C (-40 to 185 F)

 

Features, Applications

STEP-UP, 1.2 MHz HIGH-FREQUENCY, PWM CONTROL SWITCHING REGULATOR CONTROLLER

The S-8337/8338 Series is a CMOS step-up switching regulator which mainly consists of a reference voltage circuit, an oscillator, an error amplifier, a PWM controller, an under voltage lockout circuit (UVLO), and a timer latch short-circuit protection circuit. Because its minimum operating voltage is as low 1.8 V, this switching regulator is ideal for the power supply of an LCD or for portable systems that operate on a low voltage. The internal oscillation frequency can be set to 1.133 MHz, via the resistor connected to the ROSC pin. With the S-8337 Series, the maximum duty ratio of PWM control can be controlled by the resistor connected to the RDuty pin. With the S-8338 Series, the maximum duty ratio is fixed (to 88%). The phase compensation and gain value can be adjusted according to the values of the resistor and capacitor connected to the CC pin. Therefore, the operation stability and transient response can be correctly set for each application. The reference voltage accuracy is as high 1.0 Vą1.5%, and any voltage can be output by using an external output voltage setting resistor. In addition, the delay time of the short-circuit protection circuit can be set by using the capacitor connected to the CSP pin. If the maximum duty condition continues because of short-circuiting, the capacitor externally connected to the CSP pin is charged, and oscillation stops after a specific time. This condition is cleared by re-application of power or by setting the switching regulator (S-8338 Series) to the shutdown status. A ceramic capacitor or a tantalum capacitor is used as the output capacitor, depending on the setting. This controller IC allows various settings and selections and employs a small package, making it very easy to use.

Features

Low voltage operation: Oscillation frequency: Maximum duty: V 286 kHz to 1.133 MHz (selectable by external resistor) to 88.5% (selectable by external resistor) (S-8337 Series) Fixed to 88% typ. (S-8338 Series) Reference voltage: 1.0 Vą1.5% UVLO (under-voltage lockout) function: Detection voltage can be selected from between 1.5 V and 0.1 V steps. Hysteresis width can be selected from between 0.1 V and 0.1 V steps. Timer latch short-circuit protection circuit: Delay time can be set using an external capacitor. Soft-start time can be selected in three steps, 10 ms, 15 ms, and 20 ms. Soft-start function: Phase compensation external setting: Adjustable by connecting resistor and capacitor in series to GND. Shutdown function: S-8338 Series, shutdown current consumption: 1.0 A max. Lead-free, 100%, halogen-free*1

Applications
Power supplies for LCDs and CCDs Power supplies for portable equipment

STEP-UP, 1.2 MHz HIGH-FREQUENCY, PWM CONTROL SWITCHING REGULATOR CONTROLLER Rev.4.0_00 S-8337/8338 Series Block Diagram

STEP-UP, 1.2 MHz HIGH-FREQUENCY, PWM CONTROL SWITCHING REGULATOR CONTROLLER Rev.4.0_00 S-8337/8338 Series Product Name Structure

1. Product name (1) 8-Pin SON(A) P8T1 G Environmental code G: Lead-free (for details, please contact our sales office) Package name (abbreviation) and packing specification P8T1: 8-Pin SON(A), tape Soft-start time setting 20 ms UVLO setting 1.5 V UVLO hysteresis setting 0.3 V Pin setting 7: With MaxDuty setting function 8: With Shutdown function


 

Related products with the same datasheet
S-8337AAAA-T8T1
S-8337AAAA-T8T1G
S-8337AAAA-T8T1U
S-8337AAAB-P8T1
S-8337AAAB-P8T1G
S-8337AAAB-T8T1
S-8337AAAB-T8T1G
S-8337AAAB-T8T1U
S-8337AAAC-P8T1
S-8337AAAC-P8T1G
S-8337AAAC-T8T1
S-8337AAAC-T8T1G
Some Part number from the same manufacture Seiko Instruments
S-8337ABCA-T8T1G Specifications: Configuration / Function: SINGLE ; Package Type: Other, LEAD FREE, SON-8 ; Life Cycle Stage: ACTIVE ; IOUT: 0.1600 amps ; VIN: 3.3 volts ; fsw: 1246 kHz ; Operating Temperature: -40 to 85 C (-40

S-1135C30-U5T1G : HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR S-1135 Series, developed using the CMOS technology, is a positive voltage regulator IC which has the low dropout voltage, the high-accuracy output voltage and the low current consumption (300 mA output current).

S-1711A1J28-M6T1G : SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR S-1711A1515-I6T1G S-1711A1515-M6T1G S-1711A1518-I6T1G ? S-1711A1526-I6T1G ? S-1711A1528-I6T1G S-1711A1528-M6T1G S-1711A152J-I6T1G ? ? S-1711A1529-M6T1G S-1711A1533-I6T1G S-1711A1533-M6T1G

S-1206B14-M3T1G : ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR The S-1206 Series is a positive voltage regulator with ultra low current consumption, low dropout voltage, high output voltage accuracy, and 250 mA output current developed based on CMOS technology. I/O capacitors are as

S-1701Q2715-M5T1G : HIGH Ripple-rejection LOW Dropout CMOS Voltage Regulator WITH Reset Function

S-80860CLUA-B8Z-T2 : Ultra-small Package High-precision Voltage Detector

S-1137C35-U5T1U : 1.2 V FIXED POSITIVE LDO REGULATOR, 0.67 V DROPOUT, PDSO6 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed ; Package Type: Other, LEAD FREE, SNT-6A ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.18 to 1.22 volts ; VIN: 1.7 to 5.5 volts ; Dropout Voltage: 0.6700 volts

S-1137D18-I6T2G : 1.2 V FIXED POSITIVE LDO REGULATOR, 0.67 V DROPOUT, PDSO6 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed ; Package Type: Other, HALOGEN AND LEAD FREE, SNT-6 ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.18 to 1.22 volts ; VIN: 1.7 to 5.5 volts ; Dropout Voltage: 0.6700 volts

S-1702NBD00-I6T1U : 3.1 V FIXED POSITIVE LDO REGULATOR, 0.23 V DROPOUT, PDSO6 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed ; Package Type: Other, LEAD FREE, SNT-6A ; Life Cycle Stage: ACTIVE ; Output Voltage: 3.07 to 3.13 volts ; IOUT: 0.1500 amps ; VIN: 2 to 6.5 volts ; Dropout Voltage: 0.2300 volts

S-5844A55CD-A4T2U3 : DIGITAL TEMP SENSOR-SERIAL Specifications: Sensor Type: Temperature

S-8337ABCB-T8T1 : 0.16 A SWITCHING CONTROLLER, 1246.3 kHz SWITCHING FREQ-MAX, PDSO8 Specifications: Configuration / Function: SINGLE ; Package Type: Other, LEAD FREE, SON-8 ; Life Cycle Stage: ACTIVE ; IOUT: 0.1600 amps ; VIN: 3.3 volts ; fsw: 1246 kHz ; Operating Temperature: -40 to 85 C (-40 to 185 F)

S1C17803F00E10K : RISC MICROCONTROLLER Specifications: Life Cycle Stage: ACTIVE

S1C33209F00E10F : 32-BIT, FLASH, 60 MHz, RISC MICROCONTROLLER, PBGA180 Specifications: Data Bus: 16 Bit ; Life Cycle Stage: ACTIVE ; Clock Speed: 48 MHz ; ROM Type: Flash ; Supply Voltage: 1.65 to 1.95 volts ; I/O Ports: 83 ; Package Type: Other, 12 X 12 MM, 1.20 MM HEIGHT, 0.80 MM PITCH, PLASTIC, FBGA-180 ; Operating Range: Industrial ; Pin Count: 180 ; Operating Temp

 
0-C     D-L     M-R     S-Z