Details, datasheet, quote on part number: S-8338AAAC-P8T1G
PartS-8338AAAC-P8T1G
CategoryPower Management and Supplies => IC Voltage Regulators => IC Switching Voltage Regulators => 7612868
Title0.16 A SWITCHING CONTROLLER, 1246.3 kHz SWITCHING FREQ-MAX, PDSO8
Description
CompanySeiko Instruments
DatasheetDownload S-8338AAAC-P8T1G datasheet
Quote
Find where to buy
 
Specifications 
Configuration / FunctionSINGLE
Package TypeOther, LEAD FREE, SON-8
Life Cycle StageACTIVE
IOUT0.1600 amps
VIN3.3 volts
fsw1246 kHz
Operating Temperature-40 to 85 C (-40 to 185 F)

 

Features, Applications

STEP-UP, 1.2 MHz HIGH-FREQUENCY, PWM CONTROL SWITCHING REGULATOR CONTROLLER

The S-8337/8338 Series is a CMOS step-up switching regulator which mainly consists of a reference voltage circuit, an oscillator, an error amplifier, a PWM controller, an under voltage lockout circuit (UVLO), and a timer latch short-circuit protection circuit. Because its minimum operating voltage is as low 1.8 V, this switching regulator is ideal for the power supply of an LCD or for portable systems that operate on a low voltage. The internal oscillation frequency can be set to 1.133 MHz, via the resistor connected to the ROSC pin. With the S-8337 Series, the maximum duty ratio of PWM control can be controlled by the resistor connected to the RDuty pin. With the S-8338 Series, the maximum duty ratio is fixed (to 88%). The phase compensation and gain value can be adjusted according to the values of the resistor and capacitor connected to the CC pin. Therefore, the operation stability and transient response can be correctly set for each application. The reference voltage accuracy is as high 1.0 V1.5%, and any voltage can be output by using an external output voltage setting resistor. In addition, the delay time of the short-circuit protection circuit can be set by using the capacitor connected to the CSP pin. If the maximum duty condition continues because of short-circuiting, the capacitor externally connected to the CSP pin is charged, and oscillation stops after a specific time. This condition is cleared by re-application of power or by setting the switching regulator (S-8338 Series) to the shutdown status. A ceramic capacitor or a tantalum capacitor is used as the output capacitor, depending on the setting. This controller IC allows various settings and selections and employs a small package, making it very easy to use.

Features

Low voltage operation: Oscillation frequency: Maximum duty: V 286 kHz to 1.133 MHz (selectable by external resistor) to 88.5% (selectable by external resistor) (S-8337 Series) Fixed to 88% typ. (S-8338 Series) Reference voltage: 1.0 V1.5% UVLO (under-voltage lockout) function: Detection voltage can be selected from between 1.5 V and 0.1 V steps. Hysteresis width can be selected from between 0.1 V and 0.1 V steps. Timer latch short-circuit protection circuit: Delay time can be set using an external capacitor. Soft-start time can be selected in three steps, 10 ms, 15 ms, and 20 ms. Soft-start function: Phase compensation external setting: Adjustable by connecting resistor and capacitor in series to GND. Shutdown function: S-8338 Series, shutdown current consumption: 1.0 A max. Lead-free, 100%, halogen-free*1

Applications
Power supplies for LCDs and CCDs Power supplies for portable equipment

STEP-UP, 1.2 MHz HIGH-FREQUENCY, PWM CONTROL SWITCHING REGULATOR CONTROLLER Rev.4.0_00 S-8337/8338 Series Block Diagram

STEP-UP, 1.2 MHz HIGH-FREQUENCY, PWM CONTROL SWITCHING REGULATOR CONTROLLER Rev.4.0_00 S-8337/8338 Series Product Name Structure

1. Product name (1) 8-Pin SON(A) P8T1 G Environmental code G: Lead-free (for details, please contact our sales office) Package name (abbreviation) and packing specification P8T1: 8-Pin SON(A), tape Soft-start time setting 20 ms UVLO setting 1.5 V UVLO hysteresis setting 0.3 V Pin setting 7: With MaxDuty setting function 8: With Shutdown function


Related products with the same datasheet
S-8338AAAA-T8T1
S-8338AAAA-T8T1G
S-8338AAAA-T8T1U
S-8338AAAB-P8T1
S-8338AAAB-P8T1G
S-8338AAAB-T8T1
S-8338AAAB-T8T1G
S-8338AAAB-T8T1U
S-8338AAAC-P8T1
S-8338AAAC-T8T1
S-8338AAAC-T8T1G
Some Part number from the same manufacture Seiko Instruments
S-8338AAAC-T8T1 Specifications: Configuration / Function: SINGLE ; Package Type: Other, LEAD FREE, SON-8 ; Life Cycle Stage: ACTIVE ; IOUT: 0.1600 amps ; VIN: 3.3 volts ; fsw: 1246 kHz ; Operating Temperature: -40 to 85 C (-40

S-1702BGE01 : The S-1702 Series, Developed Based On CMOS Technology, Is A 150 MA Output Positive Voltage Regulator With A Low Dropout Voltage, A High-accuracy Output Voltage, And Low Current Consumption. The S-1702 Series Includes A Voltage Regulator With High-accuracy Output Voltage Of 1.0% Allowing To Use A C

S-1137B13-U5T1G : High Ripple-Rejection Low Dropout Soft-start Function CMOS Voltage Regulator S-1137 Series S-1137 Series, developed using the CMOS technology, is a positive voltage regulator IC which has the low dropout voltage, the high-accuracy output voltage and the soft-start function (300 mA output current).

S-8353H30MA-IWPT2G : STEP-UP, PWM CONTROL Or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR The S-8353/8354 Series is a CMOS step-up switching regulator which mainly consists of a reference voltage source, an oscillation circuit, a power MOS FET, an error amplifier, a phase compensation circuit, a

S-8358B27MC-NQMT2G : STEP-UP, SUPER-SMALL PACKAGE, 600 KHz, PWM CONTROL Or PWM/PFM SWITCHABLE SWITCHING REGULATOR CONTROLLER The S-8355/56/57/58 Series is a CMOS step-up switching regulator controller which mainly consists of a reference voltage source, an oscillation circuit, an error amplifier, a phase compens

S-8358E50MC-NTJT2G : STEP-UP, SUPER-SMALL PACKAGE, 600 KHz, PWM CONTROL Or PWM/PFM SWITCHABLE SWITCHING REGULATOR CONTROLLER The S-8355/56/57/58 Series is a CMOS step-up switching regulator controller which mainly consists of a reference voltage source, an oscillation circuit, an error amplifier, a phase compens

RA-4574SA:B-0 : REAL TIME CLOCK, PDSO14 Specifications: Device Type: Real Time Clock ; Package Type: Surface Mount, SOP, SOP-14 ; Supply Voltage: 1.6 to 5.5 volts ; Frequency: 0.0320 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F)

S-1137C26-U5T1G : 1.2 V FIXED POSITIVE LDO REGULATOR, 0.67 V DROPOUT, PDSO6 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed ; Package Type: Other, LEAD FREE, SNT-6A ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.18 to 1.22 volts ; VIN: 1.7 to 5.5 volts ; Dropout Voltage: 0.6700 volts

S-1701W5043-U5T1U : 1.6 V FIXED POSITIVE LDO REGULATOR, 0.58 V DROPOUT, PDSO5 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed ; Package Type: SOT23, Other, LEAD FREE, SOT-23, 5 PIN ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.58 to 1.62 volts ; IOUT: 0.0300 amps ; VIN: 2 to 6.5 volts ; Dropout Voltage: 0.5800 volts

S-817B13AUA-CWC-T2G : 1.1 V FIXED POSITIVE LDO REGULATOR, 1.58 V DROPOUT, PDSO5 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed ; Package Type: SOT23, Other, HALOGEN AND LEAD FREE, SOT-23, 5 PIN ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.08 to 1.12 volts ; VIN: 2.1 to 10 volts ; Dropout Voltage: 1.58 volts

S-8337ACEB-T8T1 : 0.16 A SWITCHING CONTROLLER, 1246.3 kHz SWITCHING FREQ-MAX, PDSO8 Specifications: Configuration / Function: SINGLE ; Package Type: Other, LEAD FREE, TSSOP-8 ; Life Cycle Stage: ACTIVE ; IOUT: 0.1600 amps ; VIN: 3.3 volts ; fsw: 1246 kHz ; Operating Temperature: -40 to 85 C (-40 to 185 F)

S-8521E50MC-BMJT2G : 0.05 A SWITCHING CONTROLLER, 375 kHz SWITCHING FREQ-MAX, PDSO5 Specifications: Configuration / Function: SINGLE ; Package Type: SOT23, Other, HALOGEN FREE AND LEAD FREE, SOT-23, 5 PIN ; Life Cycle Stage: ACTIVE ; IOUT: 0.0500 amps ; VIN: 2.5 volts ; fsw: 375 kHz ; Operating Temperature: -40 to 85 C (-40 to 185 F)

S1C17803B00E10M : RISC MICROCONTROLLER Specifications: Life Cycle Stage: ACTIVE

 
0-C     D-L     M-R     S-Z