Details, datasheet, quote on part number: SST89E564
DescriptionFlashflex51 MCU
CompanySilicon Storage Technology, Inc.
DatasheetDownload SST89E564 datasheet
Find where to buy


Features, Applications

8-bit 8051 Family Compatible Microcontroller (MCU) with Embedded SuperFlash Memory is 5V Operation to 40 MHz Operation is 3V Operation to 25 MHz Operation at 3V Fully Software and Development Toolset Compatible as well as Pin-For-Pin Package Compatible with Standard 8xC5x Microcontrollers 1 KByte Register/Data RAM Dual Block SuperFlash EEPROM SST89E564/SST89V564: 64 KByte primary block + 8 KByte secondary block (128-Byte sector size) SST89E554/SST89V554: 32 KByte primary block + 8 KByte secondary block (128-Byte sector size) Individual Block Security Lock Concurrent Operation during In-Application Programming (IAP) Block Address Re-mapping Support External Address Range to 64 KByte of Program and Data Memory Three High-Current Drive Pins (16 mA each) Three 16-bit Timers/Counters Full-Duplex Enhanced UART Framing error detection Automatic address recognition Eight Interrupt Sources at 4 Priority Levels Watchdog Timer (WDT) Four 8-bit I/O Ports (32 I/O Pins) Second DPTR register Reduce EMI Mode (Inhibit ALE through AUXR SFR) SPI Serial Interface TTL- and CMOS-Compatible Logic Levels Brown-out Detection Extended Power-Saving Modes Idle Mode Power Down Mode with External Interrupt Wake-up Standby (Stop Clock) Mode PDIP-40, PLCC-44 and TQFP-44 Packages Temperature Ranges: Commercial +70C) Industrial to +85C)

SST89V564, SST89E554, and SST89V554 are members of the FlashFlex51 family of 8-bit microcontrollers. The is a family of microcontroller products designed and manufactured on the state-of-the-art SuperFlash CMOS semiconductor process technology. The device uses the same powerful instruction set and is pin-forpin compatible with standard 8xC5x microcontroller devices. The device comes with 72/40 KByte of on-chip flash EEPROM program memory using SST's patented and proprietary CMOS SuperFlash EEPROM technology with the SST's field-enhancing, tunneling injector, split-gate memory cells. The SuperFlash memory is partitioned into 2 independent program memory blocks. The primary SuperFlash Block 0 occupies 64/32 KByte of internal program memory space and the secondary SuperFlash Block 1 occupies 8 KByte of internal program memory space. The 8-KByte secondary SuperFlash block can be mapped to the lowest location of the 64/32 KByte address space; it can also be hidden from the program counter and used as an independent EEPROM-like data memory. The flash memory blocks can be programmed via a standard 87C5x OTP EPROM programmer fitted with a special adapter and firmware for SST's device. During the power-on reset, the

device can be configured as a slave to an external host for source code storage as a master to an external host for In-Application Programming (IAP) operation. The device is designed to be programmed "In-System" and "In-Application" on the printed circuit board for maximum flexibility. The device is pre-programmed with an example of bootstrap loader in the memory, demonstrating the initial user program code loading or subsequent user code updating via the "IAP" operation. An example of bootstrap loader is for the user's reference and convenience only. SST does not guarantee the functionality or the usefulness of the sample bootstrap loader. Chip-Erase or Block-Erase operations will erase the pre-programmed sample code. In addition to 72/40 KByte of SuperFlash EEPROM program memory on-chip, the device can address to 64 KByte of external program memory. In addition x 8 bits of on-chip RAM, to 64 KByte of external RAM can be addressed. SST's highly reliable, patented SuperFlash technology and memory cell architecture have a number of important advantages for designing and manufacturing flash EEPROMs. These advantages translate into significant cost and reliability benefits for our customers.

The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc. FlashFlex, In-Application Programming, IAP, and SoftLock are trademarks of Silicon Storage Technology, Inc. These specifications are subject to change without notice.

PRODUCT DESCRIPTION. 1 LIST OF FIGURES. 4 LIST OF TABLES. 5 1.0 FUNCTIONAL BLOCKS. 6 Functional Block Diagram. 6 2.0 PIN ASSIGNMENTS. 7 2.1 Pin Descriptions. 8 3.0 MEMORY ORGANIZATION. 10 3.1 Program Memory. 10 3.2 Program Memory Block Switching. 11 3.2.1 Reset Configuration of Program Memory Block Switching. 12 3.3 Data Memory. 12 3.4 Dual Data Pointers. 12 3.5 Special Function Registers (SFR). 12 4.0 FLASH MEMORY PROGRAMMING. 24 4.1 External Host Programming Mode. 24 4.1.1 Product Identification. 4.1.2 Arming Command. 4.1.3 Detail Explanation of the External Host Mode Commands. 4.1.4 External Host Mode Clock Source. 4.1.5 Flash Operation Status Detection Via External Host Handshake. 4.1.6 Step-by-step instructions to perform External Host Mode commands. 4.1.7 Flash Memory Programming Timing Diagrams with External Host Mode. In-Application Programming Mode Clock Source. Memory Bank Selection for In-Application Programming Mode. IAP Enable Bit. In-Application Programming Mode Commands. Polling. Interrupt Termination.

5.0 TIMERS/COUNTERS. 36 6.0 SERIAL I/O. 36 6.1 Enhanced Universal Aysnchronous Receiver/Transmitter (UART). 36 6.1.1 Framing Error Detection. 36 6.1.2 Automatic Address Recognition. 36 6.2 Serial Peripheral Interface (SPI). 37

Preliminary Specifications 7.0 WATCHDOG TIMER. 39 8.0 SECURITY LOCK. 40 8.1 Hard Lock. 40 8.2 SoftLock. 40 8.3 Security Lock Status. 40 9.0 RESET. 43 9.1 Power-On Reset. 43 9.2 Software Reset. 43 9.3 Brown-out Detection Reset. 43 9.4 Interrupt Priority and Polling Sequence. 43 9.5 Power-Saving Modes. 44 9.5.1 Idle Mode. 44 9.5.2 Power Down Mode. 44 9.5.3 Standby Mode (Stop Clock). 44 9.6 Clock Input Options. 46 9.7 Recommended Capacitor Values for Crystal Oscillator. 46 10.0 ELECTRICAL SPECIFICATION. 47 Absolute Maximum Stress Ratings. 47 10.1 Operation Range. 47 10.2 Reliability Characteristics. 10.3 DC Electrical Characteristics. 10.4 AC Electrical Characteristics. 10.5 AC Characteristics. 52 11.0 PRODUCT ORDERING INFORMATION. 56 11.1 Valid Combinations. 56 12.0 PACKAGING DIAGRAMS. 57


Related products with the same datasheet
Some Part number from the same manufacture Silicon Storage Technology, Inc.
SST89E564-25-C-NI Flashflex51 MCU
SST89E564RC-25-I-PI Flash-flex 51 MCU
SST89E564RD Flashflex51 MCU
SST89E564RD-40-C-NJ Flash-flex 51 MCU
SST89E564RD-40-C-PJ Flashflex51 MCU
SST89E564RD-40-C-TQJ Flash-flex 51 MCU
SST89E564RD-40-I-NI Flashflex51 MCU
SST89E564RD-40-I-NJ Flash-flex 51 MCU
SST89E564RD-40-I-PJ Flashflex51 MCU
SST89E564RD-40-I-TQJ Flash-flex 51 MCU
SST89V554 Flashflex51 MCU
SST89V554RC-33-C-NJ Flash-flex 51 MCU
SST89V554RC-40-C-NI Flashflex51 MCU

SST29EE020-120-4I-EN : 2 Mbit (256K X 8) Page-mode EePROM

SST29VE010-250-4C-NN : 1 Mbit (128K X 8) Page-mode EePROM

SST30VR021-70-C-WH-R : 2 Mbit ROM SRAM

SST39LF400A-55-4E-EN : 4 Mbit Multi-purpose Flash

SST89E564-25-I-PI : Flashflex51 MCU

SSY39L200454CUK : 2 MBIT / 4 MBIT / 8 MBIT ( X 16 ) Multi - Purpose Flash

SSY39V200454IU3 : 2 MBIT / 4 MBIT / 8 MBIT ( X 16 ) Multi - Purpose Flash

SST29EE010-150-3I-PH : 512 Kbit (64K x8) Page-write Eeprom

SST32HF1681 : Multi-purpose Flash (mpf) + SRAM Combomemory

SST36VF1601-90-4C-BK : 32 Mbit (x8/x16) Concurrent Superflash

Same catergory

L8411 : High Power Quasi-cw Laser Diode. High optical power 100W/bar in average High stability Long life High cost performance APPLICATIONS Pumping source for solid state lasers Materials processing Welding Soldering Medical systems Our high power Quasi-CW laser diode, L8411, several advantages such as high stability with long life, high cost performance with compact structure, and higher.

JDV2S08FS : VCO for the UHF band. TOSHIBA Diode Silicon Epitaxial Planar Type High capacitance ratio: = 3.0 (typ.) Low series resistance: = 0.35 (typ.) This device is suitable for use in a small-size tuner. Characteristic Reverse voltage Junction temperature Storage temperature range Symbol VR Tj Tstg Rating 150 -55~150 Unit V C Note: Using continuously under heavy loads (e.g. the application.

84065030 : SIMM Series Input Modules. SIMM Series Input Modules 6.2 mm wide and 65 mm deep * DIN Rail mounted * LED input status indicator * Bridges enable quick linking of common voltage * Identification zone on front face * IP20 Nominal voltage Operating voltage range Max input current Operating temperature range Storage temperature range Turn-On time Turn-Off time Switching frequency.

ZD68V0 : 200mw Sod-323 Zener Voltage Regulators. Spec. No. : C346S2 Issued Date : 2004.04.12 Revised Date : Page No. : 1/4 The ZD02V4S2 series zener diodes are packaged a SOD-323 surface mount package that has a power dissipation of 200mW. They are designed to provide voltage regulation protection and are especially attractive in situations where space at a premium. They are well suited for applications.

HA1-AC115 : COST Saving Subminiature PC Board Relays. Compact construction Sensitive - very low operating power Soldering flux inflow prevented by molded construction Contact capacity 250 V AC, 30 V DC Simple mechanism for stable quality - only 9 pieceparts Amber sealed types available S Arrangement Contact material Initial contact resistance, max. (By voltage drop 1 A) Max. switching power Rating (resistive.

FPF-096-6005-BLK : Shrink Tubing. s: Accessory Type: Heat Shrink Tubing ; For Use With: Cable & Wire ; Series: - ; Shrink Tubing / Boot Material: Polyolefin ; Shrink Ratio: 2:1 ; I.D. Supplied: 38mm ; I.D. Max Recovered: 19.1mm ; Wall Thickness Recovered: 1.02mm ; Shrink Tubing / Boot Color: Black ; Total Length - Metric: 760mm ; Total Length - Imperial: 2.5ft.

SML-P11VTT86 : Standard LED - SMD LOW CURRENT PICOLED RED 50mW 20mA 1.8V. » » » LEDs - High Brightness - SMD - Red LEDs - High Brightness - SMD - RedStandard SMD (surface mount device) LED components are often used in indication applications and generally have power levels s: Manufacturer: ROHM Semiconductor ; Product Category: Standard LED - SMD ; RoHS:.

HMM22DRUS : Gold Through Hole Card Edge, Edgeboard Connector Connectors, Interconnect Non Specified - Dual Edge; CONN EDGECARD 44POS .156 DIP SLD. s: Card Thickness: 0.062" (1.57mm) ; Card Type: Non Specified - Dual Edge ; Contact Finish: Gold ; Mounting Type: Through Hole ; : - ; Number of Positions: 44 ; Number of Rows: 2 ; Pitch: 0.156" (3.96mm) ; Packaging:.

50-57-9421 : Free Hanging (In-Line) Rectangular - Housing Connectors, Interconnect Female Socket; CONN HOUSING 21POS .100 W/LATCH. s: Color: Black ; Contact Termination: Crimp ; Contact Type: Female Socket ; Mounting Type: Free Hanging (In-Line) ; Number of Rows: 1 ; Pitch: 0.100" (2.54mm) ; Packaging: Bulk ; Connector Type: Receptacle ; Fastening Type: Latch Lock.

ATS400B : 40MHz Crystal Crystal And Oscillator Through Hole; CRYSTAL 40.0 MHZ 18 PF 3OT. s: Frequency: 40MHz ; Load Capacitance: 18pF ; Package / Case: HC49/US ; Packaging: Bulk ; Frequency Tolerance: 30ppm ; Mounting Type: Through Hole ; Operating Mode: 3rd Overtone ; Operating Temperature: -20C ~ 70C ; Type: MHz Crystal ; Lead Free Status: Lead Free ; RoHS.

IDT728980DBG : TELECOM, DIGITAL TIME SWITCH, PQFP44. s: Supply Voltage (VS): 5 volts ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Number of Pins: 44 ; Package Type: QFP, 10 X 10 MM, 0.80 MM PITCH, PLASTIC, QFP-44 ; Standards and Certifications: RoHS.

MB86064PB-G : PARALLEL, WORD INPUT LOADING, 0.0018 us SETTLING TIME, 14-BIT DAC, PBGA120. s: Package Type: 12 X 12 MM, PLASTIC, EFBGA-120 ; Screening Level: Industrial ; Pins: 120 ; Operating Temperature: -40 to 85 C (-40 to 185 F).

PBSS5540ZTRL : 5 A, 40 V, PNP, Si, POWER TRANSISTOR. s: Polarity: PNP ; Package Type: PLASTIC, SC-73, 4 PIN.

UT60T03G-TF3-R : 45 A, 30 V, 0.012 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220AB. s: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 30 volts ; rDS(on): 0.0120 ohms ; Package Type: TO-220, HALOGEN FREE, TO-220F, 3 PIN ; Number of units in IC: 1.

0-C     D-L     M-R     S-Z