|
|
Part: 74VHCT126A
Category:
Logic
-> VHC/VHCT->Low Noise HCMOS
Description: Quad Bus Buffer (3-STATE)
Company: ST Microelectronics, Inc.
Datasheet: Download 74VHCT126A datasheet File size : 110 kB
Request For quote: Find where to buy 74VHCT126A
Datasheet text preview:
74VHCT126A
QUAD BUS BUFFERS (3-STATE)
s s
s
s
s
s
s
s
s s
H IGH SPEED: tPD = 3.8 ns (TYP.) at VCC = 5V LOW POWER DISSIPATION: ICC = 2 µA (MAX.) at TA=25°C C OMPATIBLE WITH TTL OUTPUTS: VIH = 2V (MIN.), VIL = 0.8V (MAX) POWER DOWN PROTECTION ON INPUTS & OUTPUTS SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 8 mA (MIN) BALANCED PROPAGATION DELAYS: tPLH tPHL OPERATING VOLTAGE RANGE: VCC(OPR) = 4.5V to 5.5V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 126 IMPROVED LATCH-UP IMMUNITY LOW NOISE: VOLP = 0.8V (MAX.)
SOP
TSSOP
ORDER CODES
PACKAGE SOP TSSOP TUBE 74VHCT126AM T&R 74VHCT126AMTR 74VHCT126ATTR
DESCRIPTION The 74VHCT126A is an advanced high-speed CMOS QUAD BUS BUFFERS fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. The device requires the 3-STATE control input G to be set low to place the output in to the high impedance state.
Power down protection is provided on all inputs and outputs and 0 to 7V can be accepted on inputs with no regard to the supply voltage. This device can be used to interface 5V to 3V since all inputs are equipped with TTL threshold. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.
PIN CONNECTION AND IEC LOGIC SYMBOLS
July 2001
1/9
74VHCT126A
INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION
PIN No 1, 4, 10, 13 2, 5, 9, 12 3, 6, 8, 11 7 14 SYMBOL 1G to 4G 1A to 4A 1Y to 4Y GND V CC NAME AND FUNCTION Output Enable Inputs Data Inputs Data Outputs Ground (0V) Positive Supply Voltage
TRUTH TABLE
A X L H
X : Don` t Care Z : High Impedance
G L H H
Y Z L H
AB SOLUTE MAXIMUM RATINGS
Symbol V CC VI VO VO IIK IOK IO Supply Voltage DC Input Voltage DC Output Voltage (see note 1) DC Output Voltage (see note 2) DC Input Diode Current DC Output Diode Current DC Output Current Parameter Value -0.5 to +7.0 -0.5 to +7.0 -0.5 to +7.0 -0.5 to VCC + 0.5 - 20 ± 20 ± 25 ± 50 -65 to +150 300 Unit V V V V mA mA mA mA °C °C
ICC or IGND DC VCC or Ground Current Tstg Storage Temperature TL Lead Temperature (10 sec)
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied 1) Output in OFF State 2) High or Low State
RECOMMENDED OPERATING CONDITIONS
Symbol V CC VI VO VO Top dt/dv Supply Voltage Input Voltage Output Voltage (see note 1) Output Voltage (see note 2) Operating Temperature Input Rise and Fall Time (see note 3) (VCC = 5.0 ± 0.5V) Parameter Value 4.5 to 5.5 0 to 5.5 0 to 5.5 0 to VCC -55 to 125 0 to 20 Unit V V V V °C ns/V
1) Output in OFF State 2) High or Low State 3) VIN from 0.8V to 2V
2/9
74VHCT126A
DC SPECIFICATIONS
Test Condition Symbol Parameter VCC (V) 4.5 to 5.5 4.5 to 5.5 4.5 4.5 4.5 4.5 4.5 to 5.5 0 to 5.5 5.5 5.5 0 IO=-50 µA IO=-8 mA IO=50 µA IO=8 mA VI = VIH or VIL VO = 0V to 5.5V VI = 5.5V or GND VI = VCC or GND One Input at 3.4V, other input at VCC or GND VOUT = 5.5V TA = 25°C Min. 2 0.8 4.4 3.94 0.0 0.1 0.36 ±0.25 ± 0.1 2 1.35 0.5 4.5 4.4 3.8 0.1 0.44 ± 2.5 ± 1.0 20 1.5 5.0 Typ. Max. Value -40 to 85°C Min. 2 0.8 4.4 3.7 0.1 0.55 ± 2.5 ± 1.0 20 1.5 5.0 Max. -55 to 125°C Min. 2 0.8 Max. V V V V µA µA µA mA µA Unit
VIH VIL VOH VOL IOZ
High Level Input Voltage Low Level Input Voltage High Level Output Voltage Low Level Output Voltage High Impedance Output Leakage Current Input Leakage Current Quiescent Supply Current Additional Worst Case Supply Current Output Leakage Current
II ICC
IC C
IOPD
AC ELECTRICAL CHARACTERISTICS (Input tr = tf = 3ns)
Test Condition Symbol Parameter VC C (V) 5.0
(*)
Value TA = 25°C Min. Typ. 3.8 5.3 3.6 5.1 6.1 Max. 5.5 7.5 5.1 7.1 8.8 -40 to 85°C Min. 1.0 1.0 1.0 1.0 1.0 Max. 6.5 8.5 6.0 8.0 10.0 -55 to 125°C Min. 1.0 1.0 1.0 1.0 1.0 Max. 6.5 8.5 6.0 8.0 10.0 ns ns ns Unit
CL (pF) 15 50 15 50 50 RL = 1 K RL = 1 K RL = 1 K
tPLH tPHL tP Z L tPZH tPLZ tPHZ
Propagation Delay Time Output Enable Time Output Disable Time
5.0(*) 5.0(*) 5.0
(*)
5.0(*)
(*) Voltage range is 5.0V ± 0.5V
3/9
74VHCT126A
CA PACITIVE CHARACTERISTICS
Test Condition Symbol Parameter Min. CIN CO U T CPD Input Capacitance Output Capacitance Power Dissipation Capacitance (note 1) TA = 25°C Typ. 4 15 20 Max. 10 Value -40 to 85°C Min. Max. 10 -55 to 125°C Min. Max. 10 pF pF pF Unit
1) CPD is defined as the value of the IC's internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x f IN + ICC/4 (per circuit)
DYNAMIC SWITCHING CHARACTERISTICS
Test Condition Symbol Parameter VCC (V) 5.0 TA = 25°C Min. Typ. 0.3 -0.8 CL = 50 pF 2.0 -0.3 V Max. 0.8 Value -40 to 85°C Min. Max. -55 to 125°C Min. Max. Unit
VOLP VOLV VIHD
VILD
Dynamic Low Voltage Quiet Output (note 1, 2) Dynamic High Voltage Input (note 1, 3) Dynamic Low Voltage Input (note 1, 3)
5.0
5.0
0.8
1) Worst case package. 2) Max number of outputs defined as (n). Data inputs are driven 0V to 3.0V, (n-1) outputs switching and one output at GND. 3) Max number of data inputs (n) switching. (n-1) switching 0V to 3.0V. Inputs under test switching: 3.0V to threshold (VILD), 0V to threshold (VIHD), f=1MHz.
4/9
74VHCT126A
TEST CIRCUIT
TEST tPLH, tPHL tPZL, tPLZ tPZH, tPHZ
CL =15/50pF or equivalent (includes jig and probe capacitance) RL = R1 = 1K or equivalent RT = ZOUT of pulse generator (typically 50)
SWITCH Open VCC GND
W AVEFORM 1 : PROPAGATION DELAYS (f=1MHz; 50% duty cycle)
5/9
Others parts begin by 74
74-1 74-2 74-3 74-4 74-5 74-6 74-7 74-8 74-9 74-10 74-11 74-12 74-13 74-14 74-15 74-16 74-17 74-18 74-19 74-20 74-21 74-22 74-23 74-24 74-25 74-26 74-27 74-28 74-29 74-30 74-31 74-32 74-33 74-34 74-35 74-36 74-37 74-38 74-39 74-40 74-41 74-42 74-43 74-44 74-45 74-46 74-47 74-48 74-49 74-50 74-51 74-52 74-53 74-54 74-55 74-56 74-57 74-58 74-59 74-60 74-61 74-62
|
|
|
