|
|
Part: LD1117V25C
Category:
Power Management
-> Regulators
-> Linear Regulators
-> LDO (Low Drop Out)
Description: 2.5V - Low Drop Regulator
Company: ST Microelectronics, Inc.
Datasheet: Download LD1117V25C datasheet File size : 61 kB
Request For quote: Find where to buy LD1117V25C
Datasheet text preview:
LD1117 SERIES
LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS
s s
s s
s
s s
s
LOW DROPOUT VOLTAGE (1V TYP.) 2.85V DEVICE PERFORMAN CES ARE SUITABLE FOR SCSI-2 ACTIVE TERMINATION OUTPUT CURR ENT UP TO 800 mA FIXED OUTPUT VOLTAGE OF: 1.2V, 1.8V, 2.5V, 2.85V, 3.0V, 3.3V, 5.0V ADJUSTABLE VERSION AVAILABILITY (Vrel=1.25V) INTERNAL CURRENT AND THERMAL LIMIT AVAILABLE IN ± 1% (AT 25°C) AND 2% IN FULL TEMPERATURE RANGE SUPPLY VOLTAGE REJECTION: 75dB (TYP.)
SOT-223
TO-220
DESCRIPTION The LD1117 is a LOW DROP Voltage Regulator able to provide up to 800mA of Output Current, available even in adjustable version (Vref=1.25V). Concerning fixed versions, are offered the following Output Voltages: 1.2V,1.8V,2.5V,2.85V, 3.0V 3.3V and 5.0V. The 2.85V type is ideal for SCSI-2 lines active termination. The device is supplied in: SOT-223, DPAK, SO-8 and TO-220. The SOT-223 and DPAK surface mount packages optimize the thermal characteristics even offering a relevant space saving effect. High efficiency is assured by NPN pass transistor. In fact in this B L OC K D I A GR A M
DPAK
SO-8
case, unlike than PNP one, the Quiescent Current flows mostly into the load. Only a very common 10”F minimum capacitor is needed for stability. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within ± 1% at 25 °C. The ADJUSTABLE LD1117 is pin to pin compatible with the other standard. Adjustable voltage regulators maintaining the better performances in terms of Drop and Tolerance.
February 2003
1/23
LD1117 SERIES
AB SOLUTE MAXIMUM RATINGS
Symbol VIN Ptot Tstg Top DC Input Voltage Power Dissipation Storage Temperature Range Operating Junction Temperature Range for C Version for standard Version ParameterČ Value 15 12 -40 to +150 -40 to +125 0 to +125 Unit V W °C °C °C
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. Over the above suggested Max Power Dissipation a Short Circuit could definitively damage the device.
THERMA L DATA
Symbol Rthj-case Rthj-amb Parameter Thermal Resistance Junction-case Thermal Resistance Junction-ambient SOT-223 15 SO-8 20 DPAK 8 TO-220 3 50 Unit °C/W °C/W
APPLICATION CIRCUIT (FOR 1.2 V)
APPLICATION CIRCUIT (FOR OTHER FIXED OUTPUT VOLTAGES)
2/23
LD1117 SERIES
CONNECTION DIAGRAM (top view)
SOT-223
S O- 8
DP AK
TO-220
NOTE: The TAB is connected to the VOUT.
ORDERING CODES
SOT-223 LD1117S12 LD1117S18 LD1117S18C LD1117S25 LD1117S25C LD1117S28 LD1117S30 LD1117S30C LD1117S33 LD1117S33C LD1117S50 LD1117S50C LD1117S LD1117SC
(*) Available on request
SO-8 LD1117D12 (*) LD1117D18 LD1117D18C LD1117D25 LD1117D25C LD1117D28 LD1117D30 LD1117D30C LD1117D33 LD1117D33C LD1117D50 LD1117D50C LD1117D LD1117DC
DPAK LD1117DT12 LD1117DT18 LD1117DT18C LD1117DT25 LD1117DT25C LD1117DT28 LD1117DT30 LD1117DT30C LD1117DT33 LD1117DT33C LD1117DT50 LD1117DT50C LD1117DT LD1117DTC
TO-220 LD1117V12 (*) LD1117V18 LD1117V18C LD1117V25 LD1117V25C LD1117V28 LD1117V30 LD1117V30C LD1117V33 LD1117V33C LD1117V50 LD1117V50C LD1117V LD1117VC
OUTPUT VOLTAGE 1.2 V 1.8 V 1.8 V 2.5 V 2.5 V 2.85 V 3V 3V 3.3 V 3.3 V 5V 5V ADJUSTABLE FROM 1.25 TO 15V ADJUSTABLE FROM 1.25 TO 15V
3/23
Others parts begin by ld
LD-1 LD-2 LD-3 LD-4 LD-5 LD-6 LD-7 LD-8 LD-9 LD-10
|
|
|
