Details, datasheet, quote on part number: STLVD210
PartSTLVD210
CategoryAnalog & Mixed-Signal Processing => Amplifiers => Differential Amplifiers
DescriptionDifferential LVDS Clock Driver
CompanyST Microelectronics, Inc.
DatasheetDownload STLVD210 datasheet
  

 

Features, Applications

100ps PART-TO-PART SKEW 50ps BANK SKEW DIFFERENTIAL DESIGN MEETS LVDS SPEC. FOR DRIVER OUTPUTS AND RECEIVER INPUTS REFERENCE VOLTAGE AVAILABLE OUTPUT VBB LOW VOLTAGE VCC RANGE TO 2.625V HIGH SIGNALLING RATE CAPABILITY (EXCEEDS 700MHz) SUPPORT OPEN, SHORT, AND TERMINATED INPUT FAIL-SAFE (LOW OUTPUT STATE) PROGRAMMABLE DRIVERS POWER OFF CONTROL

DESCRIPTION The is a low skew programmable 1-to-5 dual differential LVDS driver, designed with clock distribution in mind. The LVDS input signals can be either differential or single-ended if the VBB output is used. The STLVD210 is provided with a 11 bit shift register with a serial in and a Control Register. The purpose is to enable or power off each output clock channel and to select the clock input. The ORDERING CODES

STLVD210 is specifically designed, modelled and produced with low skew as the key goal. Optimal design and layout serve to minimize gate to gate skew within a device. The net result is a dependable guaranteed low skew device. The STLVD210 can be used for high performance clock distribution in 2.5V systems with LVDS levels. Designers can be take advantage of the device's performance to distribute low skew clocks across the backplane or the board.

PlN N SYMBOL CK SI CLKn/CLKn VBB EN GND Qn0:4/Qn0:4 VCC NAME AND FUNCTION Control Register Clock Control Register Serial IN/CLK_SEL LVDS CLK Inputs Reference Voltage Output Device Enable/Program GROUND LVDS Supply Voltage

Symbol VCC VI VO IOSD ESD Supply Voltage Input Voltage Output Voltage Driver Short Circuit Current Electrostatic Discharge (HBM 1.5K, 100pF) Parameter Value to (VCC+0.2) Continuous >2 KV Unit V

Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied.

Symbol RTj-c Parameter Thermal Resistance Junction-Case Value 13 Unit C/W

Symbol VCC VIC TOPR TJ Supply Voltage Receiver Common Mode Input Voltage Operating Free-Air Temperature Range Operating Junction Temperature Parameter Min 0.5(VID) -40 TYP Max 85 105 Unit V C


 

Some Part number from the same manufacture ST Microelectronics, Inc.
STLVD210B Differential LVDS Clock Driver
STLVDS050 High Speed Differential Line Drivers And Receivers
STLVDS050B
STLVDS051
STLVDS051B
STLVDS104 4-port LVDS And 4-port Ttl-to LVDS Repeaters
STLVDS104B 4-PORT LVDS And 4-PORT TTL to LVDS Repeaters
STLVDS105 4-port LVDS And 4-port Ttl-to LVDS Repeaters
STLVDS105B 4-PORT LVDS And 4-PORT TTL to LVDS Repeaters
STLVDS31 High Speed Differential Line Drivers
STLVDS31AD
STLVDS31B High Speed Differential Line Drivers
STLVDS32 High Speed Differential Line Receivers
STLVDS32B
STLVDS3486B
STLVDS3487AD
STLVDS3487B High Speed Differential Line Drivers
STLVDS385 3.3V Programmable LVDS Transmitter 24-BIT Flat Panel Display (FPD) LINK-85MHZ
STLVDS385B +3.3V Programmable LVDS Transmitter 24-BIT Flat Panel Display (FPD) LINK-85MHZ
STLVDS385B High Speed Flat-panel Display Interface
STLVDS385BTR 3.3V Programmable LVDS Transmitter 24-BIT Flat Panel Display (FPD) LINK-85MHZ
Same catergory

A3134 : . This low-hysteresis bipolar Hall-effect switch is an extremely temperature-stable and stress-resistant sensor especially suited for operation over extended temperature ranges to +150C. Superior high-temperature performance is made possible through a novel Schmitt trigger circuit that maintains operate and release point stability by compensating for temperature.

AD532 : Internally Trimmed Integrated Circuit Multiplier. Pretrimmed (AD532K) No External Components Required Guaranteed 1.0% max 4-Quadrant Error (AD532K) Diff Inputs for Y2)/10 V Transfer Function Monolithic Construction, Low Cost APPLICATIONS Multiplication, Division, Squaring, Square Rooting Algebraic Computation Power Measurements Instrumentation Applications Available in Chip Form The AD532 is the first.

HI-524 : Multiplexers. 4-Channel Wideband And Video Multiplexer. The a 4-Channel CMOS analog multiplexer designed to process single-ended signals with bandwidths to 10MHz. The chip includes of 4 decoder for channel selection and an enable input to inhibit all channels (chip select). Three CMOS transmission gates are used in each channel, as compared to the single gate in more conventional CMOS multiplexers. This.

LA6311M : . The is a voltage comparator that has low input currents. It is also designed to operate over a wide range of supply voltages ; from V op amp supplies down to the single 5 V supply used for IC logic. Its output is compatible with TTL as well as MOS circuits. Offset balancing is provided, and the outputs can be OR wired. Response time (100 ns typ). Operating.

LA7282M : VCR Audio Signal Recording Playback Processor. The LA7282 and 7282M are small package ICs containing all functions necessary to record and playback VCR audio signal. Small package leaves large space for other components. Delete of In and Output electrolysis capacitor. Low capacitor (0.1F) for the line amplifier inputs (PB IN and AUDIO IN) Non-Adjustment of PB Gain by less gain scatter. Any and all SANYO.

LTC1040 : LTC1040, Dual Micropower Comparator. Micropower 1.5W (1 Sample/Second) Power Supply Flexibility Single Supply to 16V Split Supply 8V Guaranteed Max Offset 0.75mV Guaranteed Max Tracking Error Between Input Pairs 0.1% Input Common Mode Range to Both Supply Rails TTL/CMOS Compatible with 5V or Single 5V Supply Input Errors are Stable with Time and Temperature The is a monolithic CMOS.

MAX1624 : Power. High-speed Step-down Controllers With Synchronous Rectification For Cpu Power.

MC34002 : JFET Input Operational Amplifier. These low cost JFET input operational amplifiers combine two stateoftheart analog technologies on a single monolithic integrated circuit. Each internally compensated operational amplifier has well matched high voltage JFET input devices for low input offset voltage. The BIFET technology provides wide bandwidths and fast slew rates with low input.

MC74F85D : 4-bit Magnitude Comparator Fast Schottky TTL. The a 4-Bit Magnitude Comparator which compares two 4-Bit words A3, B3 being the most significant inputs. Operation is not restricted to binary codes; the device will work with any monotonic code. Three Outputs are provided: "A greater than (0A > B), "A less than (0A < B), "A equal (0A = B). Three Expander Inputs, = B, allow cascading without.

NJU201A : C-mos Quad SPST Analog Switch.

OP-09 : Quad Matched 741-type Operational Amplifiers.

OPA4243EA/250 : ti OPA4243, Quad Operational Amplifier Micropower, Single-supply. For most current data sheet and other product information, visit www.burr-brown.com q MICRO-SIZE, TSSOP PACKAGE q SINGLE-SUPPLY OPERATION q WIDE SUPPLY RANGE: 36V q LOW QUIESCENT CURRENT: 45A/chan q WIDE BANDWIDTH: 430kHz q WIDE INPUT/OUTPUT SWING The is a four-channel op amp specifically designed for high density, space-limited applications, such.

PAC470QT : P/active Emi/rfi T Filter.

SA04 : PWM Amplifier. WIDE SUPPLY RANGE--16-200V 20A CONTINUOUS 85 C CASE 3 PROTECTION CIRCUITS ANALOG OR DIGITAL INPUTS SYNCHRONIZED OR EXTERNAL OSCILLATOR FLEXIBLE FREQUENCY CONTROL APPLICATIONS MOTORS TO 4HP REACTIVE LOADS LOW FREQUENCY SONAR LARGE PIEZO ELEMENTS OFF-LINE DRIVERS C-D WELD CONTROLLER The is a pulse width amplifier that can supply 4000W to the load. An internal.

TLC070CD : ti TLC070, Single Wide-bandwidth High-output-drive op Amp W/shutdown. TLC075, TLC07xA FAMILY OF WIDE-BANDWIDTH HIGH-OUTPUT-DRIVE SINGLE SUPPLY OPERATIONAL AMPLIFIERS Wide Bandwidth. 10 MHz High Output Drive IOH. mA at VDD V IOL. 0.5 V High Slew Rate SR+. 16 V/s SR. 19 V/s Wide Supply Range. 16 V Supply Current. 1.9 mA/Channel Ultralow Power Shutdown Mode IDD. 125 A/Channel Low Input Noise Voltage. 7 nVHz Input.

TLC2201 : Advanced Lincmose(tm) Low-noise Precision Operational Amplifiers. TLC220xB, TLC220xY Advanced LinCMOSTM LOW-NOISE PRECISION OPERATIONAL AMPLIFIERS B Grade Is 100% Tested for Noise 30 nV/Hz Max Hz 12 nV/Hz Max = 1 kHz Low Input Offset Voltage. 500 V Max Excellent Offset Voltage Stability With Temperature. 0.5 V/C Typ Rail-to-Rail Output Swing Low Input Bias Current 1 pA Typ = 25C Common-Mode Input Voltage Range.

TLC320AD80C : Audio Processor Subsystem. IMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. TI warrants performance of its semiconductor.

UPC4570 : Dual Ultra Low-noise,wideband,operational Amplifier.

5962-0721302QXC : 500MHz Rail-to-Rail Amplifiers he 5962-0721301QXC, 5962-0721302QXC and 5962-0721303QYC are fully DSCC SMD compliant parts and the SMD data sheets are available on the DSCC website (http://www.dscc.dla.mil/ programs/specfind/default.asp). The 5962-0721301QXC is electrically equivalent to the EL8202, the 5962-0721302QXC is electrically equivalent to the EL8203,.

 
0-C     D-L     M-R     S-Z