Details, datasheet, quote on part number: VCO190-370T
PartVCO190-370T
CategoryTiming Circuits => Oscillators => VCO (Voltage Controlled Oscillators)
DescriptionHigh Performance Signal Source
CompanySirenza
DatasheetDownload VCO190-370T datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Model: VCO190-370T Rev: B Date: 4/22/2003 Customer: VARI-L COMPANY Operating Temperature Range: ° C)

Parameter Frequency Range Tuning Voltage: 340 MHz 400 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 4.75-5.25 V Frequency Pulling dB RL Tuning Port Capacitance Output Impedance -

Package Information Package Type: Dimensions: x 0.156 inches Drawing Number: Drawing Revision: 60035 E


 

Some Part number from the same manufacture Sirenza
VCO190-395T High Performance Signal Source
VCO190-422T
VCO190-435T
VCO190-445T
VCO190-450AT
VCO190-450T
VCO190-453T
VCO190-470T
VCO190-490T
VCO190-492T
VCO190-493T
VCO190-52U
VCO190-540T
VCO190-548T
VCO190-550T
VCO190-577U
VCO190-588T
VCO190-598U
VCO190-630T
VCO190-640T
VCO190-675T
Same catergory

ASQ433.92E : Crystal Oscillators. 5.0 X 5.0 X 1.35 MM Ceramic Two-port Saw Resonator 433.82MHz 10/2002.

BXO9334 : Frequency Range (MHz) = 1000 - 1600 ;; P1dB Comp Point (Typ/Min) (dBm) = 12.5 / 10 ;; Tuning Voltage (Min to Max) (V) = 1 to 11 ;; Phase Noise @ 100 KHZ (Typ) (dBc/Hz) = -113 ;; Harmonics (Typ/Max) (dBc) = -20 / -12 ;; DC Power (Typ) (V/mA) = 15 / 19 ;; Package = Package = Package = 4 Pin TO-8 Package = Surface Mount Package = Connectorized.

CY24133 : Mediaclock. MediaClockTM Digital TV Clock Generator with VCXO Low jitter, high-accuracy outputs VCXO with analog adjust 3.3V operation Benefits Meets critical timing requirements in complex system designs Large ±150-ppm range, better linearity Enables application compatibility Part Number CY24133-1 Outputs 2 Input Frequency Range 27-MHz pullable Crystal per Cypress.

ICS9248-112 : Frequency Generator & Integrated Buffers For Celeron & Pii/iii (tm). Frequency Generator & Integrated Buffers for Celeron & PII/IIITM Recommended Application: 810/810E type chipset. Output : 2- CPUs 9 - SDRAM up to150MHz including 1 free running 8 - PCICLK 1 - IOAPIC @ 2.5V, PCI or PCI/2 MHz 3.3V, 2X PCI MHz 48MHz, @3.3V fixed. 24MHz, @3.3V fixed 1- REF @3.3V, 14.318MHz. : to 166MHz frequency support Support FS0-FS3.

ICS9248-179 : Motherboards. Frequencygenerator And Integrated Buffers For Celeron, Pii/iii.

IMISM560BZ : EMI Reduction. Emi Suppression. to 108-MHz operating frequency range Wide (9) range of spread selections Accepts clock and crystal inputs Low power dissipation mw (50 MHz) Frequency Spread disable function Center Spread modulation Low cycle-to cycle jitter Eight-pin SOIC package Applications VGA controllers LCD panels and monitors Printers and multi-function devices (MFP) Peak electromagnetic.

M3500C-0510 : (500 to 1000 MHz). Nominal Supply Voltage Power Output (50 ) Typical Current Tuning Voltage FM(Phase)Noise: Maximum Supply Voltage Tuning Voltage Min/Max +12V +12.5 dBm V -72 dBc/Hz <-94 dBc/Hz <-114 dBc/Hz <-128 dBc/Hz 0.6 MHz/V for 1V 10 MHz peak-peak -11 dBc 1.9 MHz 3.4 MHz 9.4 MHz Power Dissipation Frequency Tuning Range Power Output (50 ) Frequency Pushing.

M5003 : Package = 9 X 16 MM FR-4 ;; Frequency = 1.000 to 800.000 MHZ ;; Output Logic = LVCMOS/ LVDS Lvpecl ;; Supply Voltage = 3.3 Volt.

MK3722 : Set-topbox Audio Clock. The is a low cost, low jitter, high performance VCXO and PLL clock synthesizer designed to replace expensive discrete VCXOs and multipliers. The patented on-chip Voltage Controlled Crystal Oscillator accepts 3.3 V input voltage to cause the output clocks to vary by ±115 ppm. Using ICS' analog/digital Phase-Locked Loop (PLL) techniques, the device uses.

MT8941AE : Digital PLL->DS1 & E1. MT8941 - Advanced T1/CEPT Digital Trunk PLL.

NJU6301Series : Analog Clock ic.

PCA0102A : Frequency (MHz) = 102.4-102.4 ;; Step Size (KHz) = 50 ;; Power (dBm) = 0 2 ;; RMS Phase Error (°) = 1.0 ;; Side Band Spurs (dBm) = -65 ;; VCC (Vdc) = 3 ;; Icc (mA) = 21 ;; Package = CPLL.

PLL500-20 : , Low Phase Noise Vcxo ( 20MHz to 52MHz ). VCXO output for the to 52MHz range Low phase noise (-130 dBc @ 10kHz offset at 52MHz). CMOS output with OE tri-state control. to 52MHz fundamental crystal input. Integrated high linearity variable capacitors. 12mA drive capability at TTL output. 150 ppm pull range, max 5% linearity. Low jitter (RMS): 4ps period jitter. 3.63V DC operation. Available.

TC9217F : High Speed PLL For DTS.

TFS111 : SAW Devices (Surface Acoustic Wave). Application = Dect, Bluetooth ;; Center Frequency = 111.0 MHZ ;; 3 DB = 900kHz ;; Pass Band Ripple =   ;; Insertion Loss = 14,0dB ;; Group Delay Ripple = 300ns ;; Package = 13 MM X 6 MM LCC.

TFS380 : SAW Devices (Surface Acoustic Wave). Application = Umts ;; Center Frequency = 380.0 MHZ ;; 3 DB = 4.0 MHZ * ;; Pass Band Ripple =   ;; Insertion Loss = 16.0dB ;; Group Delay Ripple = 100ns ;; Package = 7 MM X 5 MM LCC.

VF751 : . Ultra Miniature Surface Mount Temperature Compensated Voltage Controlled Crystal Oscillator (VCTCXO) x 7,0mm) Parameter Symb Vcc Ts F F/F Vcc Icc Peak to peak Clipped Sine Wave Vc 1.5 nominal 1st year to +75°C Per MIL­STD­202, Method 213, Cond. E Per MIL­STD­883, Method 1011, Cond. A Per MIL­STD­883, Method 2007, Cond. A 260°C, for 10s, Max; 230°C,.

VTC4Series : . Ultra Small Tight Stability TCXO as low ± 1 ppm Reflow Solderable 12.8 MHz to 26.0 MHz 5% 0.8 Vp-p Minimum Clipped Sinewave 10 Kohms 10pF TCXO, No Control Voltage ±5ppm Minimum ±8ppm Minimum ±10ppm Minimum Stability vs. Supply: Aging: Current: Phase Noise: Standard Packaging: Typical P/N: ±0.3ppm max. 1.0ppm/year 1.5mA Maximum 100 Hz offset 1 kHz offset.

 
0-C     D-L     M-R     S-Z